{"title":"Airgun Accessories","description":"","products":[{"product_id":"power-airgun-grease-25ml-tube","title":"Napier Power Airgun Grease 25ml – Spring \u0026 Seal Lubricant","description":"\u003cp\u003eNapier Power Airgun Grease is a specialist lubricant formulated specifically for air rifle mechanisms. The red grease contains Napier's VP90 corrosion-inhibiting compound and is designed primarily for main springs in spring-piston airguns, where it reduces vibration, twang and mechanical wear without attacking thrust washers or synthetic seals. It is equally suitable for metal-to-metal sliding surfaces, cocking mechanisms and other internal moving parts across spring, PCP and CO₂ airguns. Napier state that the grease has been part of the Air Arms master service kit for a number of years, and it is stocked as an accessory by Air Arms directly. The formula operates across a temperature range of −20°C to +120°C and meets the DIN 51807 water-resistance standard. Supplied in a 25ml tube that is straightforward to apply to spring coils and internal surfaces during routine servicing.\u003c\/p\u003e","brand":", ShippingGroup: SML , Age_verification: Over 18 , Export_Block , LS-RM Default , NAAG , _agecheck","offers":[{"title":"Default Title","offer_id":10646774087716,"sku":"993103","price":8.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/sr0U4eCr3Pz75dAa8gJu7EThVAXpjIn6-24.jpg?v=1569372532"},{"product_id":"power-pellet-lube-10ml-bottle","title":"Napier Power Pellet Lube 10ml Airgun Pellet Lubricant","description":"\u003cp\u003eNapier Power Pellet Lube is a pellet lubricant from Napier of London, supplied in a handy 10ml dropper bottle, that helps any airgun shoot tighter, more consistent groups. The formula does more than simply lubricate: it leaves a chemical seal around the skirt of every pellet so it will not skim or tear as it engages the rifling. That cleaner passage improves the gyroscopic effect imparted to the pellet, steadies its flight and brings a noticeable lift in downrange accuracy. It works with any pellet and on any type of airgun, from spring-piston break-barrels to PCP rifles, making it a simple tuning step for hunters, pest controllers and field-target shooters alike. As an added benefit, lubricated pellets reduce friction and lead build-up in the bore, keeping the barrel cleaner over a longer string of shots. To apply, add a few drops to a tin of pellets and rotate the tin gently so every pellet picks up a light, even coating before you head out to shoot.\u003c\/p\u003e","brand":", ShippingGroup: SML , Export_Block , LS-RM Default , NAPL10","offers":[{"title":"Default Title","offer_id":10662974554148,"sku":"993100","price":4.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/66hsoLa1WGUz5NEFlGEmgmIXHtyA0dOQ-24.jpg?v=1569373238"},{"product_id":"h-n-match-pellet-box","title":"H\u0026N Match Pellet Box for 100 x 4.5mm .177 Pellets","description":"\u003cp\u003eThe H\u0026amp;N Match Pellet Box is a refillable carry case that holds and protects 100 4.5mm (.177) diabolo match pellets, keeping them safe and undamaged whether you are heading to a competition or a training session. Rather than rattling loose in a tin, each pellet sits nose-down in its own recess, so the skirts stay true and you can pick out every shot cleanly. Loading is quick: tip roughly half a tin of pellets into the open box, give it a shake, and they settle into the 100 holes one to a recess. A simple push on the lugs at each side releases the lower tray and lifts the pellets, ready to lift out individually at the firing point. The tough plastic case and tray are joined by a sturdy hinge, and an adjustable double bottom suits different pellet lengths. For target and field-target shooters who sort and select their ammunition, it makes pellet handling on the line far tidier than working straight from the tin.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , HNPB , HNPB","offers":[{"title":"Default Title","offer_id":10764190187556,"sku":"S4082","price":27.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/I08NjJ563D8Sgitg8G4FcPIFtUYdp7xr-24.jpg?v=1569381081"},{"product_id":"power-pellet-lube-25ml-eco-spray","title":"Napier Power Pellet Lube 25ml Eco Spray Airgun Pellet Lube","description":"\u003cp\u003eNapier Power Pellet Lube treats your airgun pellets so they group tighter and shoot more consistently, whatever pellet and whatever rifle you favour. The formula does more than lubricate: it lays down a chemical seal around the skirt of each pellet so it grips the rifling cleanly rather than skimming or tearing on the way out. That cleaner engagement improves the gyroscopic spin imparted by the barrel, steadies pellet flight and lifts downrange accuracy, while also helping to reduce lead fouling and barrel leading over a shooting session. This 25ml version comes as a non-aerosol eco pump spray, so application is simple and controlled. Just spray directly into your tin of pellets, let them coat, and shoot as normal. It works across springers, gas-ram and pre-charged pneumatics, and suits target shooting, plinking and pest control alike. Proven in use by world competition shooters, it is an easy way to get steadier, more repeatable results from the ammunition you already own. The compact pump bottle is handy for the range bag or workshop bench.\u003c\/p\u003e","brand":", ShippingGroup: FREE , Express_Shipping , Export_Block , LS-RM Default , NAPL25","offers":[{"title":"Default Title","offer_id":10785531396132,"sku":"993107","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/7LhqEO7h96MH67XDnKAGzpqL56igMVkM-24.jpg?v=1569382949"},{"product_id":"microbore-hose-300mm-for-cylinders","title":"Best Fittings Microbore Hose 300mm 1\/8\" BSP for Cylinders","description":"\u003cp\u003eThis Best Fittings microbore hose is a 300mm fill line for charging pre-charged pneumatic (PCP) air rifles from a dive bottle, charging cylinder or pump. It carries a female 1\/8\" BSP thread at each end, the common standard across PCP filling kit, so it screws straight onto a cylinder valve or charging adaptor at one end and your rifle's probe or Foster fill connector at the other. The narrow bore is the point of it: holding only a small volume of air, it wastes far less when you bleed off the line after a fill compared with a wider hose. The short 300mm length suits bench and boot-of-the-car charging where you want a tidy, manageable line rather than a long coil. Built from PVC-coated stainless steel, it is flexible enough to route easily yet tough enough to shrug off the knocks of regular field and range use. If you run a PCP for vermin control, HFT or general plinking, a reliable fill line is one of those quiet bits of kit that simply has to work every time you top up.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , BFHA , BFH300","offers":[{"title":"Default Title","offer_id":10786756558884,"sku":"S5045","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ZqhR7sXZ2zk8F56D7MlPLWQaKmivqFL6-24_c9899e00-1ecb-4c89-a2a2-d7b93eacce5f.jpg?v=1569383065"},{"product_id":"titan-xs-mainspring-no-9","title":"Titan XS Mainspring No.6","description":"For over 30 years Titan Mainsprings have been supplied worldwide to airgun enthusiasts, professional airgun customisers and the Gun Trade. Only the finest quality Grade 1 Swedish Silicone Chrome Vanadium Spring Steel is used. We use no mass production methods, each spring is hand wound to an exact specification, then heat treated and tempered to ensure ultimate performance and maximum durability. During final tempering, they are coated with a specially formulated hard, but flexible finish.\n\u003cbr\u003e\nNo.6 - BSA Meteor MK6 \u0026amp; MK7, BSA Comet, Crosman Phantom, Mod 800, Hatsan’s.","brand":", Export_Block , LS-RM Default , TIM6","offers":[{"title":"Default Title","offer_id":11060940800036,"sku":"S3054","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/IUgrjboJPvbSSgZfklSAVIz8qyf79OFe-24.jpg?v=1569398001"},{"product_id":"best-fittings-cylinder-carrying-strap-by-best-fittings","title":"Best Fitti Cylinder Carrying Strap by Best Fittings","description":"\u003cp\u003eBest Fitti's cylinder carrying strap by best fittings — a genuine bit of field-sports kit, supplied by BushWear from the maker's current line. Solid, properly-built, sensibly priced.\u003c\/p\u003e\u003cp\u003eSized and finished to the maker's spec. See the specification list below for the detail, and contact BushWear if you need fitment or compatibility advice before ordering.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BFCS , BFCS","offers":[{"title":"Default Title","offer_id":41452839534792,"sku":"S5251","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/sDC4OAu9A8ucgF8djVyAWC1V10FpTyJf-24.jpg?v=1641651787"},{"product_id":"bisley-titan-xs-mainspring-no-9","title":"Titan XS Mainspring No.9","description":"For over 30 years Titan Mainsprings have been supplied worldwide to airgun enthusiasts, professional airgun customisers and the Gun Trade. Only the finest quality Grade 1 Swedish Silicone Chrome Vanadium Spring Steel is used. We use no mass production methods, each spring is hand wound to an exact specification, then heat treated and tempered to ensure ultimate performance and maximum durability. During final tempering, they are coated with a specially formulated hard, but flexible finish.\n\u003cbr\u003e\nNo.9 - Air Arms TX200 MK1 \u0026amp; MK2, HW57.","brand":", Export_Block , LS-RM Default , HK416S , TIM9","offers":[{"title":"Default Title","offer_id":41452915818696,"sku":"S3057","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/dvFwikRHkGNC5qgNdUKXBI6eALWJ9Cvy-24.jpg?v=1641654473"},{"product_id":"bisley-titan-xs-mainspring-no-7","title":"Titan XS Mainspring No.7 Air Rifle Spring","description":"\u003cp\u003eThe Titan XS Mainspring No.7 is a replacement mainspring for spring-piston air rifles, supplied as one of the numbered springs in Titan's XS range. The No.7 covers a specific group of guns on the Titan application chart, so it is matched by the maker's number rather than by guesswork: it is listed to fit the BSA Polaris, Webley Tracker, Osprey, Excel, Viscount, Xocet, Stingray, Falcon and Hawk Mk1-3, along with Norica, Baikal, Cometa 5, Haenel and a range of Gamo models, and the Relum using the existing inner. When the power on a springer drops off or the firing cycle turns harsh and twangy, a tired or collapsed mainspring is usually the cause, and fitting the correct Titan number restores the original feel and muzzle energy. Always confirm your rifle against the published Titan No.7 application list before ordering. A spring under preload can be dangerous to remove and refit, so if you are not equipped with a spring compressor and the right knowledge, have the work done by a qualified airgunsmith.\u003c\/p\u003e","brand":", Age_verification: Over 18 , Export_Block , LS-RM Default , HK416S , TIM7 , _agecheck","offers":[{"title":"Default Title","offer_id":41452919324872,"sku":"S3055","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/niWLNho5hKVm9c4SiKCKMVekKYW6kJ3C-24_b1641294-fc9c-4353-96bd-50c4030974a3.jpg?v=1641654541"},{"product_id":"bisley-pressure-gauge-external-200-bar-for-ap20","title":"Bisley \u003ePressure Gauge External 200 BAR for AP20","description":"\u003cp\u003eBisley's \u0026gt;pressure gauge external 200 bar for ap20 — a genuine bit of field-sports kit, supplied by BushWear from the maker's current line. Solid, properly-built, sensibly priced.\u003c\/p\u003e\u003cp\u003eSized and finished to the maker's spec. See the specification list below for the detail, and contact BushWear if you need fitment or compatibility advice before ordering.\u003c\/p\u003e","brand":", Age_verification: Over 18 , Export_Block , LS-RM Default , HACPG , HACPG , _agecheck","offers":[{"title":"Default Title","offer_id":41452938363080,"sku":"S4710","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/FC5lERxzJLKKSTr6mMfi5GvKPWtw2t3t-24.jpg?v=1641655376"},{"product_id":"bisley-red-mainspring-no-4-by-ox","title":"Ox Red Mainspring No.4 Air Rifle Spring (HW35)","description":"\u003cp\u003eThis is the Ox Red Mainspring No.4, a replacement spring-piston mainspring distributed in the UK by Bisley. Ox springs are cold-coiled from Swedish square-section spring steel and are widely regarded as one of the strongest replacement mainsprings on the market, making them a sound choice when a tired factory spring has cost your air rifle its zip and consistency. The No.4 is the fitment code for the Weihrauch HW35 and the Diana\/Original RWS 52 and RWS 48, so check your model against that list before ordering. Fitting a fresh Ox spring can raise output, and the original manufacturer note warns it may take the rifle over the 12 ft\/lb legal limit, so this is not a casual swap. You will need a proper spring compressor and a degree of experience to strip and reassemble the action safely, and the work is best left to a competent gunsmith. Always recheck muzzle energy over a chronograph afterwards to confirm the rifle remains sub-12 ft\/lb and legal to hold without a firearms certificate.\u003c\/p\u003e","brand":", Age_verification: Over 18 , Export_Block , LS-RM Default , OXM4 , _agecheck","offers":[{"title":"Default Title","offer_id":41469697786056,"sku":"S3341","price":28.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/N93oqJHs2VPlLvx5XgbZzXGMFHnPxQJA-24_ec8b64bc-20ce-45dc-9afe-8163fe611f8b.jpg?v=1641989924"},{"product_id":"bushwear-air-rifle-shipping-ups","title":"BushWear RFD Air Rifle Shipping UPS","description":"\u003cp\u003eBushWear's rfd air rifle shipping ups — a genuine bit of field-sports kit, supplied by BushWear from the maker's current line. Solid, properly-built, sensibly priced.\u003c\/p\u003e\u003cp\u003eSized and finished to the maker's spec. See the specification list below for the detail, and contact BushWear if you need fitment or compatibility advice before ordering.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":41547920605384,"sku":"S54051","price":20.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/jGNYqfAS85xE2VxhjqKWlXmg8v0Uwgv4-24.jpg?v=1643812946"},{"product_id":"bushwear-air-rifle-receiving","title":"BushWear RFD Air Rifle Receiving","description":"\u003cp\u003eBushWear's rfd air rifle receiving — a genuine bit of field-sports kit, supplied by BushWear from the maker's current line. Solid, properly-built, sensibly priced.\u003c\/p\u003e\u003cp\u003eSized and finished to the maker's spec. See the specification list below for the detail, and contact BushWear if you need fitment or compatibility advice before ordering.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":41547927552200,"sku":"S54052","price":20.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/WxPrNppKNfEtjSyzHLtbjtCtqyRLfj05-24.jpg?v=1643813292"},{"product_id":"fx-airguns-fx-harmonic-adjustable-barrel-tuner-shroud-700mm-impact-m3","title":"FX Harmonic Adjustable Barrel Tuner Shroud 700mm Impact M3","description":"\u003cp\u003eThe FX Harmonic Adjustable Barrel Tuner Shroud is a 700mm carbon fibre integrated shroud system designed specifically for the FX Impact M3 PCP air rifle, combining barrel dampening with precise harmonic tuning in a single unit. Carbon fibre is used throughout because it is stiffer than aluminium, expands less with heat and does a better job of controlling barrel harmonics — all of which helps maintain a consistent point of impact in the field. De-resonating rings at the base of the shroud press against the barrel to reduce vibration further. The heart of the system is the rotating running weight at the muzzle end, which can be adjusted by small increments without tools and holds its setting without any screws. Even minor rotations can tighten groups noticeably, particularly at medium and longer ranges. The shroud ships with three calibre-specific muzzle ends (.177\/.22, .25 and .30) that strip propellant gas for cleaner pellet exit and carry ½ UNF threads so a moderator can be fitted straight away. A serious upgrade for any Impact M3 owner who wants to wring the last bit of accuracy from their rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338480193736,"sku":"S82905","price":151.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/uPNunYMvOebfNszRRmgU3RUmgcLZF2Bs-24.jpg?v=1664191334"},{"product_id":"fx-airguns-fx-barrel-brass-inlet-177-2057-fits-royale-bobcat-monsoon-t12-verminator-ranchero-gladiator","title":"FX Airguns Barrel Brass Inlet .177 Calibre Spare Part 2057","description":"\u003cp\u003eThe FX Barrel Brass Inlet (part number 2057) is a genuine OEM replacement liner for FX Airguns .177 calibre rifles. The brass inlet sits inside the outer barrel shroud, providing the precision-machined bore through which the pellet travels — keeping accuracy and air-seal integrity where they belong. Whether you are refurbishing a well-used barrel or replacing a damaged liner, fitting a like-for-like brass part restores the rifle to factory specification. Compatible with a broad spread of FX models including the Royale, Bobcat, Monsoon, T12, Verminator, Ranchero, and Gladiator, making it a useful stock item for FX owners or airgun workshop technicians who service multiple rifles. As with all precision barrel components, take care during fitting to avoid burring the bore. Supplied as a single inlet.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338686337224,"sku":"S83351","price":12.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/vq3Z1Eb7KllbBWtnRyZjdYutzgpmzbmS-24.jpg?v=1664194848"},{"product_id":"fx-airguns-fx-barrel-attachment-30","title":"FX Airguns Barrel Attachment .30 – X-Barrel Connector","description":"\u003cp\u003eThe FX Barrel Attachment .30 is the breech-end connector that secures the X-Barrel outer shroud to the action on FX's modular barrel system. Sized for .30 calibre (7.62 mm), this is part number 19963 in the FX parts catalogue. It fits rifles running the FX Smooth Twist X barrel platform, including the FX Impact MK2, Impact M3, Wildcat MK2 and MK3, Dreamline, Maverick, and Crown \/ Crown MK2. The connector locates the liner assembly within the outer shroud and maintains the precise bore alignment that the STX system requires. It is the correct replacement part for shooters adding a .30 calibre barrel kit to a compatible rifle, or replacing a worn original fitment. Verify your rifle's production generation and barrel-system revision number before ordering, as the design was updated during the production run. This is a genuine FX Airguns factory part.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338686369992,"sku":"S83684","price":34.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/sGheHRZuWBEOmpGw8ahCaXdlp37Oc8i4-24.jpg?v=1664194849"},{"product_id":"fx-airguns-fx-barrel-support-33mm-airtube-14mm-barrel","title":"FX Barrel Support 33mm Airtube \/ 14mm Barrel","description":"\u003cp\u003eThe FX Barrel Support is a replacement or spare support collar designed for FX air rifles that have a 33 mm diameter air tube and a 14 mm diameter barrel. It fits models including the Cyclone, Cutlas and Gladiator MkI — any FX rifle using the standard 14 mm barrel housed within a 33 mm airtube assembly. The support locates and holds the barrel concentrically within the airtube, maintaining correct alignment along the full length of the action and preventing movement that could affect accuracy or cause wear. It is a functional service part rather than an upgrade, and is the correct replacement when an existing support is damaged or lost during a barrel swap or strip-down.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338686533832,"sku":"S83764","price":33.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/pRjrE3vutkm8eAaDTeOLaTWr8fhS2xcL-24.jpg?v=1664194860"},{"product_id":"fx-airguns-fx-fill-probe-adapter-mkii-to-mki","title":"FX Airguns Fill Probe Adapter MkII To MkI (5013-C)","description":"\u003cp\u003eThe FX Airguns Fill Probe Adapter MkII To MkI (part 5013-C) bridges the two generations of FX fill connection so you can keep using your existing charging equipment after upgrading your rifle. FX introduced the MkII quick-connect fill system on newer models, making the older direct-insert MkI probe incompatible without an adapter. This small but essential piece slots between the two systems, letting a MkII-format probe or charging line work with a MkI-spec FX air rifle — so you are not forced to replace an entire fill set-up simply because the connection standard has changed. It is the tidy, cost-effective answer for any FX owner who has mixed-generation kit on the bench or who has moved between rifle models across the two eras. Sourced directly from FX Airguns, it is built to the same standards as the rest of the FX accessory range and fits without modification.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338763833544,"sku":"S83578","price":19.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/aTmmN2e5etJHZkn2agsnz3eydY0cSmKK-24.jpg?v=1664198796"},{"product_id":"fx-airguns-fx-mkii-scuba-charging-device-inc-quick-connector","title":"FX Airguns FX MkII Scuba Charging Device Inc Quick Connector","description":"\u003cp\u003eComplete charging device for your scuba tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003ePressure gauge, particle filter (replaceable), and bleed valve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003eKevlar hose 0,5 m with 1\/8 thread \/ FX Fill probe and DIN in scuba end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e125x75mm  500mm hose.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338764554440,"sku":"S83566","price":125.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/Mj27Qdjdx4G4iQ8FnhIaB4jAEGSJ0t3H-24.jpg?v=1664198816"},{"product_id":"fx-airguns-fx-superior-stx-liner-30-600mm-pellet-slug-impact-wildcat-dreamline-and-crown","title":"FX Superior STX Barrel Liner .30 Calibre 600mm Pellet \u0026 Slug","description":"\u003cp\u003eThe FX Superior Smooth Twist X (STX) Barrel Liner in .30 calibre and 600mm length is the factory-standard liner for FX Impact, Wildcat, Dreamline and Crown platforms, and is sold separately for barrel kit replacements. FX rifles the bore from the outside using their patented pressing method, holding tighter tolerances than conventional cut or button-rifled liners and producing a consistent surface finish along the full 600mm of the bore. The .30 calibre Superior standard liner has a 1:37 twist rate, which FX sets for standard-weight .30 pellets and Hybrid Slugs. The .30 is increasingly popular with UK hunters for its greater sectional density and downrange energy compared with smaller calibres, and the 600mm length suits mid-length configurations on the Impact. Supplied as the liner only.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338770321608,"sku":"S83293","price":86.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ineZqT4eYKKSO7GoOmCPHQZagvgSprDK-24.jpg?v=1664199189"},{"product_id":"fx-airguns-fx-dreamline-service-kit-upto-s-n-0101759","title":"FX Airguns FX Dreamline Service Kit Upto S\/N 0101759","description":"The FX service kit contains the most common seals and parts that might get worn.\n\n\n\n\u003cb\u003e NOTE : This kit is only suitable for FX Dreamline Air Rifles up to Serial Number 0101759 \u003c\/b\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338771370184,"sku":"S83269","price":34.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/bsAIuFGXRjPuvIhWpnfy57TV707WR3pK-24.jpg?v=1664199252"},{"product_id":"fx-airguns-fx-streamline-service-kit-22-25-30","title":"FX Airguns Streamline Service Kit .22\/.25\/.30 – Genuine Seals","description":"\u003cp\u003eThe FX Streamline Service Kit (Art. No. 7083) is the genuine factory maintenance kit for the FX Streamline PCP air rifle in .22, .25 and .30 calibre. It contains the most commonly worn seals and o-rings — the parts most likely to need replacement during routine servicing — allowing you to keep the rifle in proper working order without sending it back to the manufacturer. FX deliberately omit any seals or components that require specialist tools or expertise to replace safely, so everything in the kit is aimed at competent home service. If your Streamline is showing any drop in performance, inconsistent shot strings or a slow fill-valve leak, working through this kit is the logical first step before more involved investigation. Supplied by FX Airguns, Sweden — the original manufacturer — so fitment and tolerances are correct for the rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338879701192,"sku":"S83274","price":40.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/h4irv5MODhTF17KLPw6XkjC3cH77qhIP-24.jpg?v=1664200481"},{"product_id":"fx-airguns-fx-shroud-305mm-wc-us-22","title":"FX Airguns Wildcat Ultralight Sport Barrel Shroud 305mm .22","description":"\u003cp\u003eThe FX Airguns Shroud 305mm is a genuine OEM barrel shroud for the FX Wildcat Ultralight Sport (WC US) air rifle in .22 calibre. The shroud is the outer sleeve that runs the length of the barrel, serving two purposes: it reduces the muzzle report by acting as an integral sound moderator, and it protects the inner barrel liner from knocks and environmental debris. At 305mm it is matched to the compact barrel configuration of the Wildcat Ultralight Sport — a bullpup PCP known for its light weight and handy overall length, making it a practical choice for woodland pest control and ground game. Replacing a damaged or worn shroud with this genuine factory part ensures the internal baffle geometry and thread engagement remain exactly as FX intended, maintaining both accuracy and consistency. This is a calibre-specific part for .22 only, so check your rifle's configuration before ordering. Fitting should be within the ability of any owner comfortable with basic air-rifle maintenance, though always confirm zero and safe function after any barrel work.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338879963336,"sku":"S83380","price":46.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/16a5URkqh0KXGBog0YZTE4hydyru5nvh-24.jpg?v=1664200508"},{"product_id":"fx-airguns-fx-wildcat-service-kit","title":"FX Airguns Wildcat Service Kit - Genuine Spare Seals (Part 9013)","description":"\u003cp\u003eThe FX Wildcat Service Kit (part number 9013) is the genuine factory maintenance kit for the FX Wildcat PCP air rifle, containing the most commonly worn seals and o-rings. FX Airguns have selected the parts most likely to need replacement during routine servicing — the seals and o-rings that endure the most cycling and pressure — while deliberately excluding items that require specialist tools or workshop knowledge to fit. Whether you are carrying out a scheduled strip-down or addressing a slow pressure loss, having this kit to hand means you can return the Wildcat to its working pressure without delay. The kit covers the core internal seals; owners should confirm which Wildcat variant they hold (MK1, MK2 or MK3) before ordering, as seal specifications can vary between generations. A genuine FX kit ensures correct material grades and dimensions rather than generic substitutes.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338918006984,"sku":"S83276","price":49.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/cwySWIXwN8IuelVKqbedDfhBWTmxHPX7-24.jpg?v=1664201784"},{"product_id":"fx-airguns-fx-3-stage-stirrup-pump-inc-500mm-hose-1-8-thread","title":"FX Airguns FX 3 Stage Stirrup Pump Inc 500mm Hose 1\/8 Thread","description":"\u003cp\u003eThe easiest, most convenient and affordable way to charge your airguns patented three way system gives you 200 bar with ease. Maximum fill pressure 250 bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003ePressure gauge, moisture trap, particle filter (replaceable), and bleed valve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003eDIN or Kevlar hose 0,5 m with 1\/8 thread.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003eHeight 615mm (extracted 1070mm), Width: 205mm, Depth: 130mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003eApproximately 2kg.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338925379784,"sku":"S83569","price":213.18,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/TUqAle7cZu3eYrjME9oW0xyavFWWfMiY-24.jpg?v=1664201896"},{"product_id":"fx-airguns-fx-o-ring-9x1-5-nbr-70","title":"FX Airguns O-ring 9mm x 1.5mm NBR 70 Shore A Seal","description":"\u003cp\u003eA genuine FX Airguns replacement O-ring measuring 9mm internal diameter by 1.5mm cross-section, produced from nitrile rubber (NBR) at 70 Shore A hardness. The relatively wide internal diameter and slim cross-section give this seal a flat, low-profile geometry suited to positions where space is constrained but a reliable air seal is still required. At 70 Shore A, the nitrile compound is soft enough to conform and seat cleanly, maintaining an effective gas-tight joint in service. Nitrile rubber performs well with compressed air and is compatible with the light lubricants used in routine PCP rifle maintenance. Supplied as a genuine FX Airguns part to the original factory specification — cross-reference the 9mm x 1.5mm dimension against your FX rifle's parts list or service diagram to confirm this is the correct seal for your application before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338943074504,"sku":"S83318","price":0.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/fQuawHroM2w2SkQySIeZ8apRP7W1J2em-24.jpg?v=1664202244"},{"product_id":"fx-airguns-fx-o-ring-2-9-x-1-78-pur-90","title":"FX Airguns O-ring 2.9mm x 1.78mm PUR 90 Shore A Seal","description":"\u003cp\u003eA genuine FX Airguns replacement O-ring measuring 2.9mm internal diameter by 1.78mm cross-section, manufactured from polyurethane (PUR) at 90 Shore A hardness. Polyurethane O-rings differ from standard nitrile rubber seals in a number of important respects: PUR offers significantly higher abrasion resistance, greater tensile strength, and improved resistance to extrusion under pressure, making it a common choice for dynamic or high-stress sealing positions in PCP airguns. The 90 Shore A rating places this seal at the firmer end of the hardness scale, supporting its use in positions that see repeated movement or higher load. As a genuine FX Airguns component, it is produced to the original factory specification. Cross-reference the 2.9mm x 1.78mm dimension against your FX rifle's parts list or service diagram before ordering to confirm this is the correct seal for your application.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338943795400,"sku":"S83320","price":2.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/x7QROCykrAgLLoo4fwXPWy4cIj1k8eSh-24.jpg?v=1664202254"},{"product_id":"fx-airguns-fx-o-ring-2x1-nbr-90","title":"FX Airguns O-ring 2mm x 1mm NBR 90 Shore A Seal","description":"\u003cp\u003eA genuine FX Airguns replacement O-ring, sized 2mm internal diameter by 1mm cross-section, made from nitrile rubber (NBR) at 90 Shore A hardness. Nitrile is the standard choice for PCP air rifle sealing applications, offering good resistance to compressed air and oils. The 90 Shore A rating places this on the firmer end of the NBR scale, helping it hold a positive seal under the pressures typical of high-performance PCP rifles. Supplied as a genuine FX Airguns part, it is the correct specification for the position it was designed to fill. Cross-check the dimension against your FX rifle's parts diagram or service manual before ordering to confirm this is the right seal for your application. Ideal to keep as a workshop spare so a worn or damaged O-ring does not put your rifle out of action between sessions.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338943992008,"sku":"S83315","price":2.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/XmHgiYcYcn1Yj1EmBmulRXgbrICNOtAu-24.jpg?v=1664202259"},{"product_id":"fx-airguns-fx-quick-connector-crown","title":"FX Quick Connector Crown – Charging Fill Adaptor","description":"\u003cp\u003eThe FX Quick Connector Crown is the replacement charging and filling adaptor for the FX Crown air rifle, allowing you to connect a standard airgun fill hose directly to the rifle's fill port. The connector is threaded to the standard airgun 1\/8-inch BSP specification, which is compatible with fill hoses from diving cylinders, hand pumps and compressors designed for PCP airguns. It is the factory FX part, ensuring correct engagement with the Crown's fill nipple and a gas-tight seal during charging. If your original connector is lost, damaged or worn, fitting this genuine replacement restores the rifle to its intended fill configuration. The part is also listed for use with the FX Crown MK2 and equivalent Impact models where the same fill port design is used. Keep one in your kit bag as a spare and you will never be left unable to charge your rifle in the field.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42338944975048,"sku":"S83689","price":26.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/5wcdwygmujbBP4k4TT5g0Xcf0VBH8n93-24.jpg?v=1664202282"},{"product_id":"fx-airguns-fx-magazine-alu-standard-royale-bobcat-verminator-mkii-t12-177-16-shot","title":"FX Airguns Standard Alu Magazine .177 16 Shot – Royale\/Bobcat\/T12","description":"\u003cp\u003eThe FX Airguns standard aluminium rotary magazine is a genuine spare and upgrade part for owners of the Royale, Bobcat, Verminator MkII and T12 PCP rifles. Machined from aluminium, the magazine holds 16 pellets in .177 calibre and drops straight into the rifle's existing magazine port without modification. FX's side-by-side rotary design feeds reliably shot after shot, keeping the pellet aligned with the bore for consistent accuracy — an important detail when hunting at extended range or taking a second shot quickly on quarry. Keeping a spare magazine loaded means minimal downtime in the field: swap the empty, pocket it, and carry on without breaking your hold on the rifle. As a factory FX part, fit and function are guaranteed to match the original specification of all four compatible models.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339256336584,"sku":"S83536","price":45.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/m4MwwLEG9VwkCrc9bZdrPSf5bDyQkw2D-24.jpg?v=1664206452"},{"product_id":"fx-airguns-fx-pellet-probe-impact-30","title":"FX Airguns Pellet Probe Impact .30 Cal – Spare Part 19619","description":"\u003cp\u003eThe FX Pellet Probe Impact .30 (part number 19619) is the factory replacement pellet probe for the FX Impact PCP air rifle in .30 calibre. The pellet probe is the precision component that pushes each pellet from the rotary magazine into the breech with every cock of the side lever. It is calibre-specific — the .30 probe is not interchangeable with .177, .22 or .25 variants — so this part is the correct replacement when shooting the Impact in .30 calibre or when converting from a smaller calibre. Fitting requires the side lever to be opened to expose the probe locking screw in the rear block, after which the worn probe is withdrawn rearward and the replacement inserted with the air transfer hole facing downward; a 4 mm Allen key holds it in position while the 1.5 mm grub screw is tightened. As a genuine FX spare, it is manufactured to the same tolerances as the factory-fitted part and ensures smooth, repeatable pellet loading on every shot.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339259089096,"sku":"S83335","price":29.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/1ioG2Y8nZuZ8ZNGQAa1GhHlv9PhjKMz1-24.jpg?v=1664206484"},{"product_id":"fx-airguns-fx-o-ring-2-2x1-nbr-70","title":"FX Airguns O-ring 2.2mm x 1mm NBR 70 Shore A Seal","description":"\u003cp\u003eA genuine FX Airguns replacement O-ring measuring 2.2mm internal diameter by 1mm cross-section, made from nitrile rubber (NBR) at 70 Shore A hardness. This is a small-diameter seal, and the 70 Shore A rating gives it a degree of softness and compliance that helps it seat without excessive distortion in tight bore positions. Nitrile rubber is a reliable choice for compressed-air applications, resisting degradation from the air and light lubricants encountered in PCP rifle service. As a genuine FX Airguns component, it is manufactured to the original factory specification. Cross-reference the 2.2mm x 1mm dimension against your FX rifle's official parts list or service diagram before ordering to make certain this is the seal required for your particular repair. Keeping a stock of commonly needed O-rings on the bench means minor seal wear need not disrupt your rifle's readiness.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339259351240,"sku":"S83319","price":0.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/aKKkEeeb86Z76VYXmB0hDZYxlFmXXgx4-24.jpg?v=1664206494"},{"product_id":"fx-airguns-fx-particle-filter-assembly-1-8-external-to-1-8-internal","title":"FX Airguns Particle Filter Assembly 1\/8 BSP Male to Female","description":"\u003cp\u003eThe FX Airguns Particle Filter Assembly connects between your charging probe and the fill port on your PCP air rifle, trapping particulates and debris before they can enter the rifle's valve and air chamber. Threaded 1\/8\" BSP external (male) one end and 1\/8\" BSP internal (female) the other, it fits neatly in-line on a standard BSP fill line without adapters. Keeping the air supply clean is one of the simplest ways to protect valve seats and seals from premature wear — particularly important when filling from a dive bottle or workshop compressor where moisture and fine particles are a real concern. Designed and manufactured by FX Airguns, this assembly is built to the same close tolerances as the rest of the FX accessories range, giving a reliable seal with no bypass. A straightforward addition to any PCP set-up, whether you shoot target, field or hunting disciplines.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339276718280,"sku":"S83575","price":11.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/YRTWJTdRUY4M2HaHIJ7LMuzv0uaf6i2I-24.jpg?v=1664206550"},{"product_id":"fx-airguns-fx-impact-magazine-mk-i-to-mk-ii-upgrade-kit-inc-mag-30","title":"FX Impact Magazine MK I to MK II Upgrade Kit Inc Mag .30","description":"\u003cp\u003eThe FX Impact Magazine MK I to MK II Upgrade Kit lets owners of the original FX Impact and FX Impact X bring their rifle up to MK II magazine specification without replacing the whole action. The kit replaces the existing magazine retention plate on the receiver with a new MK II-spec plate, allowing the rifle to accept the larger FX Side-Shot rotary magazine. Supplied complete with a 21-round Side-Shot magazine in .30 calibre, everything needed is in the box. The MK II magazine system became standard fitment on the Impact X MK2, so this kit is for original Impact and Impact X owners only — the Impact X MK2 already has the retention plate installed. If you shoot the .30 calibre Impact for hunting, pest control, or long-range target work, switching to the 21-round Side-Shot magazine makes for faster follow-up shots and less time reloading in the field. Genuine FX Airguns factory part.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339312926920,"sku":"S83262","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/uhJ1WYMNhT0Sucwx4IjAYlQHpnroZE3F-24.jpg?v=1664206627"},{"product_id":"fx-airguns-fx-wildcat-rm-3-magazine-22-8-shot","title":"FX Wildcat Mk3 Rotary Magazine .22 8 Shot","description":"\u003cp\u003eThe FX Wildcat Mk3 rotary magazine keeps your PCP topped up and ready without breaking your shooting rhythm. Designed specifically for the Wildcat Mk3 platform, this side-loading magazine holds eight .22 calibre pellets in a smooth rotary drum that indexes reliably with each shot. Swapping magazines between strings is straightforward — drop the spent mag, seat a fresh one, and carry on. The magazine is made to FX's close manufacturing tolerances, so pellets feed cleanly and the drum rotates without catching or skipping. Whether you are pest controlling at range or running drills on the range, having a couple of spares loaded and ready makes a genuine difference to your session. Fits the Wildcat Mk3 only; confirm compatibility before ordering if you own an earlier Wildcat variant. Sold as a single magazine.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339321020616,"sku":"S83550","price":23.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/gTptkI17yS8KMh4YEUYNiSMizdNEs3zt-24.jpg?v=1664206643"},{"product_id":"fx-airguns-fx-cyclone-legacy-rm-2-magazine-177","title":"FX Cyclone\/Legacy RM2 Rotary Magazine .177 Calibre","description":"\u003cp\u003eThe FX Cyclone\/Legacy RM2 Magazine is a genuine FX Airguns rotary magazine machined to feed .177 calibre pellets in the FX Cyclone and FX Legacy PCP air rifles. The RM2 designation marks this as the revised second-generation version of FX's original revolver-style magazine for these models, bringing improved reliability and fit over its predecessor. If your Cyclone or Legacy magazine has worn, been lost, or you want a spare on the peg to keep shooting without reloading interruptions, this is the correct factory part. Because it is made by FX to the same tolerances as the rifle itself, indexing is positive and consistent, with each pellet presented cleanly to the breech. The .177 version is calibre-specific — do not fit a .22 magazine in a .177 rifle. Check your rifle's serial number and generation against FX documentation or your dealer if you are unsure whether this RM2 version suits your particular Cyclone or Legacy build.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339564617928,"sku":"S83297","price":21.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/2chaUf6B7bhCHhwIKLBjfse2BjViYXop-24.jpg?v=1664207450"},{"product_id":"fx-airguns-fx-wildcat-rm-3-magazine-177-8-shot","title":"FX Airguns Wildcat Mk3 Magazine .177 Cal 8 Shot","description":"\u003cp\u003eThe FX Wildcat Mk3 rotary magazine is the factory-spec magazine for the FX Wildcat Mk3 bullpup PCP air rifle, chambered for .177 calibre pellets and holding 8 shots per load. Machined to FX Airguns' own tolerances, it drops straight into the Wildcat Mk3 action without any fitting or modification — a useful advantage in the field when a quick magazine swap is all that stands between you and a follow-up shot. The side-loading rotary design keeps the magazine compact and flush with the rifle's profile, which matters on a bullpup that is already valued for its short overall length. Keeping a spare loaded magazine in a jacket pocket is straightforward, and the indexed rotation means the next pellet is always presented reliably to the breech. A sensible item to have to hand whether you are on a woodland pest-control permission or zeroing at the range.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339650535624,"sku":"S83549","price":23.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/bpgfXbDJvsSAorChQrbYutioX2Icf5IH-24.jpg?v=1664208198"},{"product_id":"fx-airguns-fx-wildcat-rm-3-magazine-25-8-shot","title":"FX Wildcat Mk3 Rotary Magazine .25 Cal 8 Shot","description":"\u003cp\u003eThe FX Wildcat Mk3 rotary magazine in .25 calibre gives you eight shots before you need to reload, keeping you focused on the task rather than fumbling with loose pellets in the field. Designed specifically for the FX Wildcat Mk3 platform, this magazine drops straight in without modification and indexes reliably shot after shot. The rotary design keeps pellets seated correctly and reduces the risk of nose damage on pointed or hollow-point projectiles — useful when you are choosing ammunition for range work or pest control. As a genuine FX Airguns spare part, tolerances are matched to the rifle rather than approximated, so feeding is smooth and consistent. Keeping a loaded spare magazine in your pocket is the simplest way to double your time on the peg, and at .25 calibre this magazine is built for the heavier pellet weights the Wildcat platform handles with authority.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339691036872,"sku":"S83551","price":23.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/sEkQzAMnW7ukUMhb9uTm9nYTLt8ibN2L-24.jpg?v=1664208279"},{"product_id":"fx-airguns-fx-impact-mkii-alu-mega-r-magazine-30-14-shot","title":"FX Impact MkII Alu Mega R Magazine .30 Cal 14 Shot","description":"\u003cp\u003eThe FX Impact MkII Aluminium Mega R Magazine is a genuine factory spare for the FX Impact MkII PCP air rifle, chambered in .30 calibre (7.62 mm) and holding 14 pellets per load. Built from aluminium, it is notably more rigid and durable than the standard polymer magazine — a useful quality when you are reloading quickly in the field or stowing spares in a jacket pocket. The rotary drum design is a direct fit for the Impact MkII action and loads in the same sequence as the standard magazine: rotate the clear cover counter-clockwise to open, drop pellets in skirt-first one by one as you turn clockwise, then close the cover. With .30 calibre delivering the energy output demanded by quarry such as rabbits, corvids and grey squirrels at longer ranges, having a fully loaded spare to hand means less down-time between strings. Whether you carry one backup or several, the aluminium construction keeps the magazine light enough not to add meaningful weight to your kit.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339724165320,"sku":"S83548","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/dS5uEFratE81qmAihtjNbjh97CwFUnFy-24.jpg?v=1664208422"},{"product_id":"fx-airguns-fx-magazine-alu-standard-royale-bobcat-verminator-mkii-t12-22-12-shot","title":"FX Airguns Standard Aluminium Magazine .22 12 Shot – Royale Bobcat T12","description":"\u003cp\u003eThe FX Standard Aluminium Magazine gives you a reliable 12-shot rotary feed for .22 calibre FX PCP rifles. Machined from aluminium, it fits the Royale, Bobcat, Verminator MkII and T12 — keeping your rifle in action without the disruption of single-loading. The magazine drops cleanly into the breech, indexes positively through each shot, and is straightforward to load and unload in the field. Whether you are pest controlling with a Verminator MkII or taking squirrels with a Bobcat, carrying a spare loaded magazine means you can swap and continue shooting in seconds. This is the standard-capacity version, seating 12 pellets in a low-profile aluminium body that adds minimal bulk to the rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339734913224,"sku":"S83537","price":45.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/xHukx7ywVvgHD51ymJPiaeO5w8M86UlC-24.jpg?v=1664208542"},{"product_id":"fx-airguns-fx-magazine-alu-standard-royale-bobcat-verminator-mkii-t12-25-11-shot","title":"FX Airguns Aluminium Standard Magazine .25 Cal 11 Shot","description":"\u003cp\u003eThe FX Airguns aluminium standard rotary magazine is the factory-fit solution for keeping your PCP rifle topped up between strings. Machined from aluminium and designed to drop straight in without adjustment, this 11-shot magazine is compatible with the FX Royale, Bobcat, Verminator MkII and T12 in .25 calibre. The rotary design indexes smoothly with each shot, giving reliable pellet presentation and consistent chambering even in cold or wet conditions on the range or in the field. Because it is the genuine FX part, timing and tolerances match the rifle exactly — no forcing, no mis-feeds. Carrying a spare means you can reload in seconds rather than feeding pellets individually, which matters when you are working through a stubble field or a busy pest-control session. A straightforward, well-made accessory that does exactly what it should.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339738845384,"sku":"S83538","price":45.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/JeYxmidXdAmYWtzdmE8llHHwn6lYDYs0-24.jpg?v=1664208675"},{"product_id":"fx-airguns-fx-impact-mkii-mkiii-ss-hi-capacity-magazine-35-18-shot","title":"FX Impact MkII\/MkIII Side-Shot Hi-Cap Magazine .35 18 Shot","description":"\u003cp\u003eThe FX Impact MkII\/MkIII Side-Shot Hi-Capacity Magazine gives .35 calibre Impact owners 18 rounds between reloads, significantly extending a shooting session compared to the standard magazine. It is a genuine FX Airguns accessory (art. no. 22035C, formerly 20284) made from injection-moulded POM — a tough, dimensionally stable engineering plastic. The side-shot design sits flush against the action and auto-indexes as you cycle the bolt, so there is no manual rotation between shots. The removable face-plate makes loading straightforward: lift the lid, drop pellets in, and replace the cover. The magazine is compatible with both the FX Impact MkII and MkIII platforms and accepts flat-nose and domed pellets up to 9.5 mm in length.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339741040840,"sku":"S83696","price":50.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/I0PqpYofgeATOIMd1fSH7KKPwr21CEjx-24.jpg?v=1664208781"},{"product_id":"fx-airguns-fx-magazine-alu-standard-royale-bobcat-verminator-mkii-t12-boss-30-9-shot","title":"FX Airguns FX Magazine Alu Standard Royale\/Bobcat\/Verminator","description":"\u003cp\u003eFX Airguns air-gun spare or accessory — genuine factory part for the maker's rifle or pistol line. See family name for the specific component.\u003c\/p\u003e\u003cp\u003eDrop-in replacement where applicable. Check fitment with your specific rifle or pistol before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339742023880,"sku":"S83539","price":45.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/EBVIRjgv9BTrXw72bvqGUj475Fby8sbL-24.jpg?v=1664208859"},{"product_id":"fx-airguns-fx-impact-mkii-alu-mega-r-magazine-25-16-shot","title":"FX Airguns Impact MkII Alu Mega R Magazine .25 Cal 16 Shot","description":"\u003cp\u003eThe FX Airguns Aluminium Mega R Magazine is a genuine OEM rotary magazine for the FX Impact MkII and MkIII airguns, chambered in .25 calibre with a 16-shot capacity. The magazine is machined in aluminium, making it noticeably more rigid and durable than standard polymer alternatives — a worthwhile upgrade for shooters who put serious round counts through their Impact on the range or in the field. Loading is straightforward: the clear rotary cover lifts and rotates to expose each chamber in turn, pellets are dropped in head-first (the first pellet seated skirt-first from the metal face to hold spring tension), and the cover clicks shut when full. The design keeps pellets secure and correctly indexed so every shot feeds cleanly without the need to stop and check alignment. Calibre-specific manufacture means the .25 chambers are sized precisely for .25 pellets — there is no ambiguity about compatibility. A spare or replacement magazine, it keeps you shooting rather than reloading mid-session, and its compact profile sits flush with the Impact's action without catching on clothing or equipment.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339743039688,"sku":"S83547","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/fRzllaLNukdiVqMEp3E5ZYGoG8zX4Iz6-24.jpg?v=1664208895"},{"product_id":"fx-airguns-fx-impact-magazine-mk-i-to-mk-ii-upgrade-kit-inc-mag-25","title":"FX Impact MK I to MK II Magazine Upgrade Kit .25 Cal Inc Mag","description":"\u003cp\u003eBring your original FX Impact or Impact X up to MK II magazine specification with this genuine factory upgrade kit from FX Airguns. The kit swaps out the existing magazine retention plate on the receiver, allowing the rifle to accept the Side-Shot jumbo magazine format used on MK II models. Once fitted, the updated base plate is compatible with both the original standard FX Impact magazine and the larger-capacity Side-Shot magazines, giving you far more flexibility at the range or in the field. The included .25 calibre (6.35 mm) Side-Shot magazine holds 25 rounds, significantly cutting down on reloading time during extended sessions. Installation is straightforward and requires no specialist tools. Note: this kit is for original FX Impact and Impact X rifles only — the Impact X MK II already ships with this system in place and does not need the upgrade. A practical, factory-backed route to MK II magazine capability without replacing the whole rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339746545864,"sku":"S83265","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/xxXk4wdGlbjbab0F1GYyVtscIHVot9jT-24.jpg?v=1664209021"},{"product_id":"fx-airguns-fx-hammer-seat","title":"FX Hammer Seat – Genuine FX Airguns Replacement Spare","description":"\u003cp\u003eThe FX Hammer Seat is a genuine FX Airguns factory replacement part for the hammer assembly in FX PCP air rifles. The hammer seat is the component against which the hammer or hammer spring locates at rest; it provides the reference surface that governs the hammer's starting position and therefore the consistency of each valve strike. A worn, cracked or displaced hammer seat will introduce variability into the striker travel, leading to erratic power output and poor shot-to-shot consistency. Fitting a replacement FX Hammer Seat restores the correct geometry to the hammer assembly and returns the rifle to its factory operating specification. This is a small but functionally critical internal part — suitable for anyone undertaking a thorough service or repair of the hammer mechanism in their FX rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339750510792,"sku":"S83306","price":26.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/dA0a08XLHXYKwAK2BJ7CISoYUv7RWgHC-24.jpg?v=1664209182"},{"product_id":"fx-airguns-fx-stock-attachment","title":"FX Airguns Stock Attachment — Genuine FX Stock Fitting","description":"\u003cp\u003eThe FX Stock Attachment is a genuine FX Airguns factory stock component for compatible FX PCP air rifles. As the name indicates, it is the attachment hardware that connects or secures the stock to the rifle's action or chassis. FX Airguns machines their furniture components to the same close tolerances as the rest of their rifles, so this fitting provides a stable, rattle-free connection between stock and action. If you are replacing a missing, damaged or worn stock attachment on an FX rifle, confirm the part number and your specific model with your dealer before ordering, as FX produces a range of stock and chassis configurations that use differing fittings.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339765158088,"sku":"S83345","price":10.27,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ecQoHDMP1LeE29q85uMjoM4jP8qVZ3v3-24.jpg?v=1664209920"},{"product_id":"fx-airguns-fx-liner-lock-30","title":"FX Liner Lock .30 — STX Barrel Liner Lock for .30 Calibre","description":"\u003cp\u003eThe FX Liner Lock .30 is the calibre-specific locking component that secures a .30 calibre STX inner barrel liner within its outer barrel housing on compatible FX PCP air rifles. The FX Smooth Twist X (STX) barrel system — found on the Impact, Crown, Wildcat, Dreamline and related platforms — allows the inner liner to be removed and replaced to change calibre or twist rate, a process that makes the STX particularly popular with shooters running heavy .30 slugs or pellets at longer ranges. The liner lock is the threaded retaining element that holds the liner firmly in place during shooting; when changing liners, the shroud is removed first, then the liner lock is unscrewed to free the existing liner. Using the calibre-correct liner lock for .30 ensures proper mechanical engagement with that liner's dimensions. This is a genuine FX Airguns factory spare and the part to order when a liner lock is lost, damaged, or required as part of a .30 calibre-conversion build.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339766304968,"sku":"S83341","price":34.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/5ywMHcBPjNiGue20EzzgPLBkeZNUfmAI-24.jpg?v=1664209980"},{"product_id":"fx-airguns-fx-rear-support-impact","title":"FX Airguns Rear Support for the FX Impact Air Rifle","description":"\u003cp\u003eThe FX Rear Support is an OEM replacement component designed specifically for the FX Impact PCP air rifle. The Impact's chassis-style stock uses a separate rear support section to complete the stock assembly and provide a stable contact point at the rear of the action; this part replaces or renews that component when worn or damaged. As a genuine FX Airguns spare, it is manufactured to the same tolerances as the original part fitted to the rifle, ensuring correct fit and function without any modification. FX Impact owners who run their rifle hard in the field or who have updated from an earlier variant will find this a straightforward direct replacement. Because the part is specific to the Impact platform, it is not compatible with other FX rifle models. If you are unsure whether this is the correct variant for your Impact generation, check the FX spare-parts schematic for your specific rifle before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339769680072,"sku":"S83720","price":69.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/Mcu6gxYLTMv4Xd1J5GnP9G5xwjlucbIY-24.jpg?v=1664210137"},{"product_id":"fx-airguns-fx-valve-adjuster-screw","title":"FX Valve Adjuster Screw — Genuine FX Airguns Spare","description":"\u003cp\u003eThe FX Valve Adjuster Screw is a genuine FX Airguns factory spare used to set and fine-tune valve behaviour on FX PCP air rifles. On FX platforms with an adjustable valve, this screw controls the pre-load or position of the valve return spring, altering how readily the valve opens and how long it stays open — the two key variables that determine shot power and consistency. Getting the adjuster screw setting right is fundamental to dialling in a stable tune: it works in combination with hammer weight and regulator output pressure to deliver the correct velocity for a given projectile and fill pressure range. If the existing screw is worn, cross-threaded, or missing, replacing it with this factory part ensures the correct thread form and engagement length are restored. Confirm compatibility with your specific FX rifle model before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":42339770335432,"sku":"S83309","price":17.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/4kqLQILcllrX6PkPFqWByfqwP9qgF4Hy-24.jpg?v=1664210174"}],"url":"https:\/\/www.bushwear.co.uk\/collections\/airgun-accessories.oembed?page=10","provider":"BushWear","version":"1.0","type":"link"}