{"title":"Rods","description":"","products":[{"product_id":"prosmith-34-universal-shotgun-rod","title":"Tetra ProSmith 34\" Universal Shotgun Cleaning Rod – Stainless","description":"\u003cp\u003eThe Tetra ProSmith 34-inch Universal Shotgun Rod is a professional-quality cleaning rod designed to work through the full length of a shotgun barrel without risk of damage. The rod itself is made from 5\/16-inch diameter heat-treated stainless steel and coated with DuPont TufCoat — a tough, chemically resistant finish that protects the rod and prevents it scoring the bore. A spinning Delrin handle at the top allows the rod to rotate freely as it travels down the barrel, reducing torque and keeping patches and brushes tracking straight. The screw-on Delrin bushing and brass collar centre the rod in the muzzle to prevent contact with the bore walls. The 5\/16-27 thread is compatible with all standard shotgun cleaning accessories, and a 5\/16-27 brass adapter is included for use with black powder firearms. At 34 inches, the rod clears the full length of most shotgun barrels in a single pass.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":10646066855972,"sku":"313253","price":62.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/TyGGzECNyPJ6BS0eLrRXKI9r3MibApUF-24.jpg?v=1569372483"},{"product_id":"deluxe-rifle-rod-30","title":"Napier Deluxe Rifle Cleaning Rod .30+","description":"\u003cp\u003eNapier's Deluxe Rifle Rod .30+ is a four-piece brass cleaning rod made in England to Napier of London's exacting specifications, sized for rifles from .30 calibre upwards. Each rod is superbly finished with brass sections and a one-piece turned anodised aluminium handle that runs on a quality bearing, letting the handle spin freely while the rod itself stays true through the bore rather than twisting against the rifling. Brass is softer than barrel steel, so the rod cleans without scoring or wearing the bore, whether you're running a patch, mop or brush through. Supplied at 92cm in length, it breaks down into four sections, making it easy to carry in a cleaning kit or store in a gun cabinet. Built to last, this is a genuine piece of Napier's rifle cleaning range and pairs naturally with Napier's cleaning oils, solvents and patches for keeping a larger-calibre rifle's bore in good order between outings.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10646813966372,"sku":"S8107","price":18.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/GQV7sbe0sx6SNYXStNBNxQEpojPMSAAo-24.jpg?v=1569397706"},{"product_id":"fieldsman-two-piece-shotgun-rod","title":"Parker-Hale Fieldsman Two-Piece Shotgun Cleaning Rod","description":"\u003cp\u003eThe Parker-Hale Fieldsman Two-Piece Shotgun Cleaning Rod is a straightforward, well-made piece of maintenance kit for anyone who looks after their own shotgun. Made from top-quality hardwood with solid brass cross-riveted joints, it splits into two sections for easy storage in a cabinet or cleaning kit, then joins securely for use. It's a universal fit, designed to work across 12, 16, 20 and 28 gauge shotguns, so one rod covers most guns in a typical cabinet. The brass fittings take standard UK-spec cleaning attachments such as mops, brushes and jags, letting you build a full cleaning routine around it. Solidly built rather than flashy, this is the kind of rod that lasts season after season with basic care, and it's a sensible, affordable addition for anyone serious about keeping their shotgun's bore in good condition. Supplied by BushWear, UK field-sports specialists since 1995.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , SRF2","offers":[{"title":"Default Title","offer_id":10654401855524,"sku":"S4537","price":22.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/miKADKt2Yj6LZxM6khKrTi4WPKOEaQRP-24.jpg?v=1569372871"},{"product_id":"rifle-rod-22","title":"Napier Rifle Cleaning Rod .22, 4-Piece Brass","description":"\u003cp\u003eNapier's Rifle Rod .22 is a four-piece brass cleaning rod made in England to Napier of London's exacting specifications, sized for .22 rimfire rifles. Each rod features brass sections finished with a one-piece turned anodised aluminium handle that runs on a quality bearing, so the handle spins freely while the rod itself stays true through the bore — reducing the risk of the rod dragging or twisting against the rifling as you clean. Brass construction means the rod is softer than the barrel steel, so it will not score or wear the bore when used with a patch, mop or brush. Supplied at 92cm in length, it breaks down into four sections for easy storage in a cleaning kit or gun cabinet. This is a genuine, durable piece of Napier's rifle cleaning range, built to keep a .22 rifle's bore in good condition between outings, and it pairs well with Napier's oils, solvents and patches for a complete cleaning routine.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10661351850020,"sku":"S8106","price":18.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/MC5AfjPkkSZcRRxj4CcBVaD95ce7QfH4-24.jpg?v=1569373131"},{"product_id":"adaptor-for-22-ph-rod-to-american-brushes","title":"Parker-Hale .22 Rod to American Brush Thread Adaptor","description":"\u003cp\u003eThis small Parker-Hale adaptor lets you run American-thread cleaning brushes, jags and implements on a .22 Parker-Hale cleaning rod. The Parker-Hale rod thread and the American 8-32 standard are not interchangeable, so the adaptor screws between the two and converts the rod end to accept any 8-32 attachment. It is a handy bit of kit if you have built up a set of US-pattern brushes and jags but clean your rimfire or small-bore barrels with a Parker-Hale rod, saving you from buying a duplicate set in the other thread. Made from brass, it resists corrosion from solvents and oils and will not mark the bore. The adaptor simply spins onto the end of the rod, ready to take the brush or jag of your choice, then comes off again when you are done. A sensible spare to keep in the cleaning box for anyone stalking with a .22 rimfire or smaller-calibre rifle who wants to mix and match cleaning components across both thread standards.\u003c\/p\u003e","brand":", Export_Restrict: True , ShippingGroup: SML , Express_Shipping , Export_Block , LS-RM Default , PHRRAD22A","offers":[{"title":"Default Title","offer_id":10663456931876,"sku":"302809","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/zHMRQHCh2VjbbQ3P9XXlOJr0xlv3mdrb-24.jpg?v=1569373290"},{"product_id":"rw2-plastic-wallet-20-gauge-rod-attachments","title":"Bisley RW2 20 Gauge Plastic Wallet Rod \u0026 Attachments","description":"\u003cp\u003eThe Bisley RW2 is a compact 20 gauge shotgun cleaning kit supplied in a plastic display wallet, giving you the essentials for proper bore maintenance without the bulk of a full cleaning cabinet. At its centre is a two-piece deluxe cleaning rod, sized to reach the full length of a 20 gauge barrel while breaking down small enough to store in the wallet or pack for a day's shooting. The kit is completed with a bronze brush for working out stubborn fouling and lead deposits, a wool mop for applying oil and lifting out loosened residue, and a 20 gauge nylon jag for running patches through the bore. The plastic wallet keeps the rod, brush, mop and jag together and protected between uses, rather than left loose in a drawer or gun bag. It is a straightforward, no-frills kit rather than a specialist tool, but it covers the essentials of routine bore cleaning after a day on the peg or in the field, and is a sensible companion to a decent solvent and gun oil.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , RW2A , RW2 20","offers":[{"title":"Default Title","offer_id":10745508167716,"sku":"S2859","price":43.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/JKMVY8zI7rRWGUvZbasgBnIi1dAwU4AI-24_6fb63847-14ea-4bfe-8ac0-3f51df47b642.jpg?v=1569379672"},{"product_id":"fieldsman-shotgun-rod-3-section","title":"Parker-Hale Fieldsman 3-Section Shotgun Cleaning Rod","description":"\u003cp\u003eParker-Hale's Fieldsman shotgun cleaning rod breaks down into three sections for easy storage in a cabinet or cleaning kit, then joins up for a full-length clean of the barrel. It is turned from top-quality hardwood with a swell handle for a secure grip, and fitted with solid brass threaded ends that take standard UK-spec 12 to 28 gauge male-thread cleaning attachments such as mops, jags and brushes. Assembled, the rod runs to around 88cm, long enough to work a full-length shotgun barrel in a single, controlled pass rather than several short strokes that can drag debris back through the bore. The three-piece design makes it a practical choice for anyone who wants a proper rod to hand at home or in the gun cabinet without the length of a one-piece version to store. Built to the maker's long-standing spec, it is a straightforward, no-nonsense piece of kit for keeping a 12 to 28 bore shotgun properly maintained between outings.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , SRF3","offers":[{"title":"Default Title","offer_id":10745508495396,"sku":"S4538","price":32.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/eihy1jtdpJBqMPNvO7JuqtPkIgLu2lal-24.jpg?v=1569379672"},{"product_id":"rifle-rod-270-female-yellow-rod-black-handle-37in","title":"Parker-Hale Rifle Rod .270 Female Yellow Black Handle 37in","description":"\u003cp\u003eParker-Hale's one-piece rifle cleaning rod combines a hardened and tempered steel core with a tough acetate coating, keeping bare metal away from the bore as the rod travels the length of the barrel. The ball-bearing handle spins freely, so a brush or jag follows the rifling rather than dragging across the lands, and brass fittings at the working end guard against corrosion. This version is finished as a yellow rod with a black handle, Parker-Hale's colour code for .270 calibre and upwards, and it's 37 inches long, enough for a clean single-stroke pass through most centrefire rifle barrels. The female thread is cut to the American #8-32 UNC standard, so it takes jags and brushes from popular US-thread ranges such as Dewey, Hoppe's, Pro-Shot and Tipton rather than the Parker-Hale male pattern. A solid, purpose-built rod for anyone maintaining a .270 or larger-calibre rifle with an American-thread cleaning kit.\u003c\/p\u003e","brand":"ship_aerosol: False , ship_battery: False , ship_restrict: DG , ship_dimensions: True , ship_explosive: False , Export_Restrict: True , Export_Block , LS_DPD Default , RR270A , RR270ALF","offers":[{"title":"Default Title","offer_id":10777828065316,"sku":"S5001","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/QT5VrBYdNKaAJm7EUBgYu50O3s8ssDeO-24.jpg?v=1569382411"},{"product_id":"brush-adaptor-double-male-for-american-rods-22-6mm","title":"Parker-Hale Double Male Brush Adaptor for American Rods .22–6mm","description":"\u003cp\u003eParker-Hale cleaning rods use a female thread at the working end, as do most American-made cleaning brushes and jags. Without an adaptor the two simply will not connect. This double male adaptor from Parker-Hale bridges that gap: thread one male end into the female tip of your Parker-Hale rod, and the other male end accepts any American-threaded brush, jag or patch holder. The result is a clean, solid connection with no play that could let a patch snag or a brush skew inside the bore. It is sized for smaller centrefire and rimfire calibres from .22 up to 6mm, covering the popular .22 LR, .223 Remington and 6mm rounds used across target shooting and vermin control. If you have built your rod set around Parker-Hale and pick up American brushes — which are widely available and often better value — this is the piece that makes the two systems work together. Small, light and inexpensive, it is worth keeping a spare in the cleaning kit.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10778567213092,"sku":"S18308","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/G4epXjLZrVpAlt7VZenF1Xh0BxPUlL0Z-24.jpg?v=1569382457"},{"product_id":"adaptor-for-270-ph-rod-to-american-brushes","title":"Parker-Hale .270 Rod Adaptor to American 8-32 Brushes","description":"\u003cp\u003eThis small Parker-Hale thread adaptor lets you run American-thread cleaning brushes, jags and other implements on a Parker-Hale .270 (and above) rifle cleaning rod. Parker-Hale rods use their own UK thread, so American Standard 8-32 accessories will not fit straight onto them; this adaptor bridges the two, screwing onto the rod at one end and accepting 8-32 male-threaded accessories at the other. For the deer stalker or rifle shooter who already owns a Parker-Hale rod but wants to use the wider range of 8-32 brushes, mops and jags on the market, it saves buying a second rod set. It is a simple, durable fitting that stays in your cleaning kit and comes out whenever you need to mix the two thread systems. Compact enough to live in a cleaning roll or range bag, it does one job and does it reliably, keeping your existing .270 rod useful with off-the-shelf American accessories rather than tying you to a single thread standard.\u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS-RM Default , PHRRAD270A","offers":[{"title":"Default Title","offer_id":10778583564324,"sku":"302810","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/8H3OJlWnyIuZhmoJNkuKSAttr7TBx1a2-24.jpg?v=1569382457"},{"product_id":"rifle-rod-22-male-grey-rod-red-handle-44in-by-parker-hale","title":"Parker-Hale Rifle Rod .22 Male Grey Red Handle 44in","description":"\u003cp\u003eThis Parker-Hale one-piece rifle cleaning rod pairs a hardened and tempered steel core with a tough acetate coating, so the rod runs down the bore without ever putting bare steel against the rifling. The ball-bearing handle spins freely as you work, letting a brush or jag follow the barrel's twist instead of scraping across the lands, and the fittings are solid brass to keep corrosion at bay. Finished as a grey rod with a red handle, it's built for small calibres from .22 up to .25, and the 44-inch length gives plenty of rod for longer rifle barrels with room to spare. The male thread is cut to the Parker-Hale pattern, so it takes Parker-Hale jags, mops and brushes directly without an adapter, making it a natural fit for anyone already running a Parker-Hale kit. A solid, no-nonsense rifle rod for regular bore maintenance on rimfire and small-calibre centrefire rifles alike.\u003c\/p\u003e","brand":"ship_aerosol: False , ship_battery: False , ship_restrict: DG , ship_dimensions: True , ship_explosive: False , Export_Restrict: True , Export_Block , LS_DPD Default , RR22A , RR22ALX","offers":[{"title":"Default Title","offer_id":10778661781540,"sku":"S4998","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/D1GQnmIJDj7nlRoeyQQyMYoBJfjQV3ma-24.jpg?v=1569382460"},{"product_id":"rifle-rod-1pc-stainless-22","title":"Napier Stainless 1-Piece Rifle Rod .22","description":"\u003cp\u003eNapier's Rifle Rod 1pc Stainless .22 is a single-piece stainless steel cleaning rod made in England to Napier of London's exacting specifications, sized for .22 rimfire rifles. Being one solid length rather than a multi-section rod, it is strong and durable with no joints to work loose or flex under pressure, and it is fitted with a quality bearing aluminium handle for long life — the handle spins freely while the rod runs true through the bore. Stainless steel gives the rod extra rigidity and resistance to corrosion compared with a sectional brass rod, which suits shooters who want a rod that will stand up to years of regular use. Supplied at 92cm in length, it is a genuine piece of Napier's rifle cleaning range, and it pairs well with Napier's mops, brushes, oils and patches for a full cleaning routine on a .22 rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":10780388065316,"sku":"S8108","price":23.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/RoYnj25LkqqULppSnpz8mqi6nvARUBYc-24.jpg?v=1569382667"},{"product_id":"pistol-rod-30","title":"Napier Pistol Cleaning Rod .30+","description":"\u003cp\u003eThe Napier Pistol Rod .30+ is a cleaning rod sized for larger-calibre pistols and revolvers, from .30 upwards. Made in England by Napier of London, it is superbly finished with brass sections and a one-piece turned anodised aluminium handle, giving a solid, comfortable grip for repeated use. Brass is softer than the steel of a barrel, so it cleans the bore without scoring or wearing it, whichever patch, mop or brush you run through. This is a genuine, no-frills piece of kit built to the same standards as Napier's rifle rod range, and it fits naturally alongside Napier's cleaning oils, solvents and patches for a complete maintenance routine on a .30-calibre-plus handgun. Note that this rod is currently held as a legacy line at BushWear; contact us to check current availability before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10783872843812,"sku":"S8105","price":15.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/fW6cxYNogVQtQOeSY0YTqt7uAWj3k1YN-24.jpg?v=1569382881"},{"product_id":"brush-adaptor-double-male-for-american-rods-270-and-above","title":"Parker-Hale Double Male Brush Adaptor for American Rods .270 \u0026 Above","description":"\u003cp\u003eParker-Hale cleaning rods terminate in a female thread, and so do most American-made brushes, jags and mops. This double male adaptor from Parker-Hale connects the two systems: one male end threads into the female tip of your Parker-Hale rod, the other accepts any American-threaded cleaning accessory. It is sized for .270 calibre and above, making it the right choice for the full range of larger centrefire rounds commonly used for deer and driven game in the UK — .270 Winchester, .308 Winchester, .30-06 Springfield, .300 Win Mag and 6.5 Creedmoor among others. American brushes are widely available and often competitively priced; this adaptor means you can use them without having to replace your Parker-Hale rod set. The fit is solid and there is no play to let a brush angle inside the bore. If you are cleaning several calibres in this range, one adaptor covers all of them.\u003c\/p\u003e","brand":", ShippingGroup: SML , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10786535211044,"sku":"S18309","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/CYhy0KyaHR3fwdUH7JWOggJD5PQd3vJz-24.jpg?v=1569383042"},{"product_id":"rifle-rod-22-female-grey-rod-red-handle-36-by-parker-hale","title":"Parker-Hale Rifle Rod .22 Female Grey Red Handle 37in","description":"\u003cp\u003eThis Parker-Hale one-piece rifle cleaning rod is built around a hardened and tempered steel core, sheathed in a tough acetate coating so the rod itself never touches the rifling as it passes down the bore. A ball-bearing handle lets the rod spin freely in use, allowing a brush or jag to follow the barrel's twist rather than dragging across the lands, and brass fittings at the working end resist corrosion over years of use. This grey rod with a red handle is sized for small calibres, covering .22 through to .25, and runs 37 inches long, enough to clear a rifle barrel in a single stroke. It's fitted with a female thread, cut to the popular American #8-32 UNC pattern, so it takes brushes and jags from Dewey, Hoppe's, Pro-Shot, Tipton and other US-thread ranges rather than the Parker-Hale male pattern. A dependable, well-specified rod for anyone maintaining a .22 rifle who wants their existing American-thread cleaning kit to fit straight on.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default , RR22A","offers":[{"title":"Default Title","offer_id":10786767241252,"sku":"S4997","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/QsJcFYTvw4zlJDXfIwbY92BHY7S9XJXM-24.jpg?v=1569383066"},{"product_id":"parker-hale-ohsg-ohare-adaptor-shotgun","title":"Parker-Hale O'Hare Adaptor for Shotgun Cleaning Rods","description":"\u003cp\u003eThe Parker-Hale O'Hare Adaptor is a small but useful fitting for anyone using a Parker-Hale shotgun cleaning rod. It screws onto the end of the rod and allows American-pattern cleaning accessories — mops, brushes and jags with US thread fittings — to be fitted where a Parker-Hale specific attachment isn't available. This is handy if you've built up a mixed collection of cleaning gear over the years, or if you've picked up US-sourced accessories that would otherwise be incompatible with your Parker-Hale rod. It's a simple, no-frills piece of kit rather than anything glamorous, but it solves a genuine practical problem for anyone maintaining a shotgun with Parker-Hale's cleaning system. Supplied genuine from Parker-Hale, it's built to the same standard as the rest of their cleaning range, so it should hold up to regular use in the gun cabinet or cleaning kit without fuss. A sensible, low-cost addition for shotgun owners who want the flexibility to use accessories from either side of the Atlantic.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , PHOHSG","offers":[{"title":"Default Title","offer_id":10807950639140,"sku":"S4209","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/B2PdJX9bqNWLTe9Vuh3f24uxfIyA0Yrs-24.jpg?v=1569385195"},{"product_id":"rifle-rod-170-male-grey-rod-black-handle-37in","title":"Parker-Hale Rifle Rod .17 Male Grey Black Handle 37in","description":"\u003cp\u003eParker-Hale's one-piece rifle cleaning rod is built around a hardened and tempered steel core, protected by a tough acetate coating so the rod never puts bare metal against the rifling as it travels down the bore. The ball-bearing handle spins freely in use, letting a brush or jag follow the barrel's twist rather than scraping across the lands, and brass fittings at the working end keep corrosion at bay. This version is a grey rod with a black handle, sized for the .17 calibre band, and runs 37 inches long, enough for a clean single-stroke pass through a rimfire or small-bore centrefire barrel. The male thread is cut to the Parker-Hale pattern, so it takes Parker-Hale jags, mops and brushes directly without an adapter, making it a natural fit for anyone already running a Parker-Hale kit. A precise, well-made rod for keeping a .17 calibre rifle's bore in good condition between outings.\u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default , RR170","offers":[{"title":"Default Title","offer_id":10814230560804,"sku":"302731","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/QuyIEqrtG0Fqfx6ycB1qlWbHmmq3IfQ3-24.jpg?v=1569385666"},{"product_id":"brass-3-piece-270-rifle-rod","title":"Parker-Hale Brass 3-Piece Rifle Cleaning Rod .270","description":"\u003cp\u003eA genuine Parker-Hale three-piece sectional cleaning rod for .270 calibre and larger rifles. Constructed from solid brass to resist corrosion around the joints, it carries the same ball-bearing handle as Parker-Hale's one-piece rods, letting the rod spin freely with the brush or jag so you don't twist bristles against the rifling. The black handle denotes the large-calibre version, built to the UK 7\/32in x 26 TPI BSB implement thread and roughly 6.35mm in rod diameter. Each of the three sections joins on the standard Parker-Hale thread, so they can be combined for a full 35in (89cm) rod to clean right through the barrel, or used singly at 13.25in (335mm) for easier storage and transport. Made in the UK, it's a straightforward, durable choice for anyone maintaining a .270 or larger-bore rifle at home or in the field, and accepts the full range of Parker-Hale rifle cleaning attachments.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , RRA , RRA","offers":[{"title":"Default Title","offer_id":10850537340964,"sku":"S5006","price":28.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/DLbuAaYPWlJcAJDPgwGUaoiALRpx1l8L-24.jpg?v=1570032009"},{"product_id":"birchwood-casey-coated-cleaning-rod-33-270-and-larger-calibers-6-8-mm-11-63","title":"Birchwood Casey Coated Cleaning Rod 33in .270+ Female Thread","description":"\u003cp\u003eThe Birchwood Casey Coated Cleaning Rod is a 33-inch one-piece rod for rifles in .270 calibre and larger, covering bores from 6.8 mm up to 11.63 mm. The single-piece design has no joints to flex or work loose mid-stroke, while the synthetic coating over the steel shaft keeps bare metal away from your rifling — a sensible precaution on a stalking rifle, where bore condition translates directly into accuracy. A free-floating handle lets the rod rotate with the rifling as you push patches and brushes through, rather than dragging across the lands. The female-threaded end accepts jags, brushes and mops, so it slots straight into the cleaning kit you already own. At 33 inches it gives full breech-to-muzzle reach on long-barrelled rifles, and it arrives in a reusable clear tube that keeps the rod straight, clean and protected between sessions. A simple, dependable rod for the gun room or the range bag, from a name shooters have trusted for decades.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":11833111609380,"sku":"S32249","price":14.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/KmWFdpQtpufJhRwXJsK1g73wUKR2Tr6s-24.jpg?v=1570062297"},{"product_id":"bisley-rifle-rod-270-female-yellow-rod-black-handle-39-5in","title":"Parker-Hale .270 Rifle Rod 44in Female Black Handle","description":"\u003cp\u003eA one-piece cleaning rod from Parker-Hale, made for rifles of .270 calibre and upwards, in the full 44in length. The rod has a hardened, tempered steel core for rigidity along its length, brass fittings, and a tough acetate coating that protects the bore and rifling from abrasion as the rod passes through. A rotating, ball-bearing handle lets brushes, jags and mops follow the rifling rather than fighting against it, giving a more thorough clean than a fixed-handle rod. This example has a female thread, so it takes the common American-pattern cleaning attachments — brushes, jags and mops — without needing an adapter. Finished with a yellow rod and black handle for easy identification alongside other calibres in a cleaning kit. A solid, no-frills rod for anyone who cleans rifles from the breech or muzzle on a proper one-piece tool rather than a folding or sectional rod.\u003c\/p\u003e","brand":"ship_aerosol: False , ship_battery: False , ship_restrict: DG , ship_dimensions: True , ship_explosive: False , Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31005201891386,"sku":"S5003","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/UXp7MZD33r33qukjNYkxxE84yXyMKxaI-24.jpg?v=1572358221"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-22-26-cal12-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .22-26 Cal12","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":31411482132538,"sku":"S27662","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/PxUXt8sChP5PmNVxZUGHXbJxOoFGRgGj-24.jpg?v=1586514573"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-27-45-cal-36-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .27-45 Cal 3","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31411500613690,"sku":"S27665","price":65.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ll6mg0dIYcpXZjrKmBvAOTmAU8sRdDiR-24.jpg?v=1586515046"},{"product_id":"tipton-tipton-deluxe-1-piece-centrefire-20-cal-40-inch","title":"Tipton Deluxe 1-Piece Carbon Fibre Cleaning Rod .20 Cal 40\"","description":"\u003cp\u003eThis Tipton Deluxe 1-Piece Carbon Fibre Cleaning Rod is built for centrefire rifles in .20 calibre, with a 40 inch length to reach the full bore length of most rifle barrels in a single pass. Carbon fibre gives the best of both worlds compared to older rod materials: it cannot scratch the bore the way bare stainless steel can, and unlike coated rods it will not embed abrasive grit that ends up scouring the rifling. The shaft also has enough give to flex under load and spring straight back afterwards, rather than taking a permanent bend. The rod earns its \"Deluxe\" name from an ergonomically shaped handle that spins freely on two sets of ball bearings, so the shaft follows the rifling smoothly on both the push and pull stroke while your hand stays still. Shank-through construction lets you apply firm, controlled pressure to shift a tight patch without stressing the rod, and a hang hole at the handle end keeps it tidy in the cleaning kit or cabinet. As a .20 calibre rod it uses the 5-40 female thread fitting rather than the standard 8-32, so check jags, mops and brushes are the matching thread before fitting.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31411504414778,"sku":"S27671","price":57.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/PzaQFf1UZZpGgxSnkBfJ9bqTFPJkdECo-24.jpg?v=1586515144"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-17-cal-36-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .17 Cal 36 I","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31411507560506,"sku":"S27657","price":63.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/Au8HBnohDMWyNN1Aoto0nj8BTqyAChBH-24.jpg?v=1586515137"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-shotgun-36-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod Shotgun 36 I","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31411509624890,"sku":"S27670","price":88.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/uxSQJZOUumQiJf0kcJPGNP4YrWvj52KO-24.jpg?v=1586515230"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-22-26-cal-36-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .22-26 Cal 3","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31411513229370,"sku":"S27659","price":68.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/KHjlluE565of2cJDIo3aJgRFjusu71yh-24.jpg?v=1586515302"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-27-45-cal-26-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .27-45 Cal 2","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":31411526041658,"sku":"S27664","price":61.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/pJbirDQIZCpFgthfXSOb4AFy2tC2v8U8-24.jpg?v=1586515681"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-22-26-cal-26-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .22-26 Cal 2","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":31411534102586,"sku":"S27658","price":61.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/vA5H7fwRnGBqzUATepKvUA3goJFuVuhQ-24.jpg?v=1586515818"},{"product_id":"tipton-tipton-deluxe-1-piece-carbon-fiber-cleaning-rod-27-45-cal-40-inch","title":"Tipton Deluxe 1 Piece Carbon Fiber Cleaning Rod .27-45 Cal 4","description":"\u003cp\u003eCarbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly  though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done  they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings  the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5\/16-27.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHang hole for easy storage.  Also allows for reasonable hammer blows to clear a stubborn patch\u003c\/li\u003e\n\u003cli\u003eTwo sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling\u003c\/li\u003e\n\u003cli\u003eComfortable ergonomic shape.  Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling\u003c\/li\u003e\n\u003cli\u003eShank-through construction for working tight light patches\u003c\/li\u003e\n\u003cli\u003eCarbon fiber shaft will not embed particles that could damage your rifle bore\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31411576340538,"sku":"S27666","price":67.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/LR4w3T4ZNikSiviPYgo0sMYoRuS59LDL-24.jpg?v=1586516470"},{"product_id":"tipton-tipton-universal-bore-guide","title":"Tipton Universal Bore Guide","description":"\u003cp\u003eThe Tipton Universal Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to bow and rub or gouge the chamber and throat of the bore, causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum tube for durability\u003c\/li\u003e\n\u003cli\u003eFits most bolt action rifles and AR-15s\u003c\/li\u003e\n\u003cli\u003eBolt Action Collar slides back and forth along tube to insure a secure fit then rotates down and locks into the bolt catch slot on the stock\u003c\/li\u003e\n\u003cli\u003eIntegrated bore solvent port allows you to add solvent after you have inserted the patch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":31415100047418,"sku":"S27822","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ZbicbfuGypXmfVNXrzQ2K9ke4xgibEIA-24.jpg?v=1586610201"},{"product_id":"tipton-tipton-max-force-carbon-fiber-cleaning-rod-17-20-cal","title":"Tipton Max Force Carbon Fiber Cleaning Rod .17\/20 Cal","description":"\u003cp\u003eTired of bending or breaking your small diameter cleaning rods? The answer is here: Tiptons MAX Force Cleaning Rod. Tipton has created a cleaning rod with a patent pending sliding handle. Now you can put the force you need right next to the bottle neck section you need it applied to. The sliding handle still allows the rod to rotate freely even while clamped down.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatent Pending clamp mechanism allows you to quickly and easily position handle at any point along the rod with just the press of your thumb.  This allows Maximum Force to be applied without fear of bending or breaking the cleaning rod and still allows the rod to spin freely on ball bearings\u003c\/li\u003e\n\u003cli\u003eAdjustable handle lets you choke up on rod for cleaning pistols\u003c\/li\u003e\n\u003cli\u003eHigh durable design is lightweight and fully solvent-resistant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Restrict: True , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31415128784954,"sku":"S27697","price":84.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/zYBNs6UDnLlufTpJrk2lJ7KtwZZ7Jhyd-24.jpg?v=1586612353"},{"product_id":"tipton-tipton-max-force-carbon-fiber-cleaning-rod-22-cal","title":"Tipton Max Force Carbon Fiber Cleaning Rod .22 Cal","description":"\u003cp\u003eTired of bending or breaking your small diameter cleaning rods? The answer is here: Tiptons MAX Force Cleaning Rod. Tipton has created a cleaning rod with a patent pending sliding handle. Now you can put the force you need right next to the bottle neck section you need it applied to. The sliding handle still allows the rod to rotate freely even while clamped down.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatent Pending clamp mechanism allows you to quickly and easily position handle at any point along the rod with just the press of your thumb.  This allows Maximum Force to be applied without fear of bending or breaking the cleaning rod and still allows the rod to spin freely on ball bearings\u003c\/li\u003e\n\u003cli\u003eAdjustable handle lets you choke up on rod for cleaning pistols\u003c\/li\u003e\n\u003cli\u003eHigh durable design is lightweight and fully solvent-resistant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":", Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":31415139958842,"sku":"S27698","price":80.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/O3r9d1yc9a3LPU1ycDOfvJI53St7YGuR-24.jpg?v=1586612531"},{"product_id":"bisley-pistol-rods-22-male-spinning-handle","title":"Bisley Pistol Cleaning Rod .22 Male Spinning Handle","description":"\u003cp\u003eBisley's .22 pistol cleaning rod is built for anyone who wants a proper job done on a handgun barrel without risking damage to the bore. The rod is acetate-covered over brass fittings, so there's no bare steel in contact with the rifling, and the ball-bearing spinning handle lets the jag or brush follow the barrel's twist rather than fighting against it as you push through. That free-spinning action is what keeps cleaning strokes smooth and consistent, stroke after stroke, rather than scrubbing across the lands at an angle. The male thread fitting takes the standard Parker-Hale pattern jags and brushes, so it slots straight into an existing UK-spec cleaning kit without needing an adapter. At .22 calibre, it's sized for rimfire and small-bore pistols, and its compact length makes it easy to store in a cleaning box or range bag alongside patches and solvent. A straightforward, well-made rod from a name that's been supplying UK shooters for decades, and a sensible way to keep a .22 pistol's bore in good condition between outings.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , LPBHA","offers":[{"title":"Default Title","offer_id":40164763599048,"sku":"S4993","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ycGU62SwQFDGY1g53Mo9Kbp4ISjh4yXE-24.jpg?v=1621600136"},{"product_id":"bisley-pistol-rods-270-female-spinning-handle","title":"Parker-Hale Pistol Rods .270 Female Spinning Handle","description":"\u003cp\u003eParker-Hale's pistol rods .270 female spinning handle — a genuine bit of field-sports kit, supplied by BushWear from the maker's current line. Solid, properly-built, sensibly priced.\u003c\/p\u003e\u003cp\u003eSized and finished to the maker's spec. See the specification list below for the detail, and contact BushWear if you need fitment or compatibility advice before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":40164781097160,"sku":"S4995","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/HfzNkTWzOcJRaC3MPbWWI4XeexmWdGvP-24.jpg?v=1621600187"},{"product_id":"parker-hale-deluxe-410-two-piece-shotgun-rod","title":"Parker-Hale Deluxe .410 Two-Piece Shotgun Cleaning Rod","description":"\u003cp\u003eThe Parker-Hale Deluxe .410 Two-Piece Shotgun Cleaning Rod is a well-made hardwood cleaning rod built specifically to suit .410 bore shotgun barrels. Turned from quality hardwood with a swell handle for a secure, comfortable grip, it splits into two sections for easy storage in a cabinet or cleaning kit and joins together via solid brass, cross-riveted fittings that resist wear and keep the joint tight through repeated use. The brass tip accepts standard Parker-Hale shotgun cleaning attachments such as mops, brushes and jags, making it a practical core piece for anyone maintaining a .410 shotgun at home or after a day in the field. It is a straightforward, no-nonsense accessory from a trusted name in gun-cleaning equipment, built to do one job well: keep a .410 barrel clean and protected between outings. A sound choice for shooters who prefer proper hardwood rods over cheaper alternatives.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , SRDA , SRD4","offers":[{"title":"Default Title","offer_id":40757756952776,"sku":"S5827","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/z8wLVmavRgdNqQevnhUvssEt9eInEU2F-24.jpg?v=1629190472"},{"product_id":"napier-pistol-rod-22","title":"Napier Pistol Rod .22 Cleaning Rod","description":"\u003cp\u003eThe Napier Pistol Rod .22 is a cleaning rod sized for .22 calibre pistols and revolvers, from Napier of London's gun care range. Napier's wider rod range - covering rifle and shotgun rods - is made in England from brass sections with a one-piece turned anodised aluminium handle, and this pistol rod sits within that same family of products, so you can expect construction in keeping with the rest of Napier's rod line-up. We could not independently verify the exact materials and finish used on this specific pistol rod, as Napier does not currently list it as a standalone product on their site, so treat any construction detail as indicative rather than confirmed. What is certain is its purpose: a rod-based cleaning tool for pushing patches, mops or brushes through a .22 pistol or revolver barrel without risking damage to the bore. It is a straightforward, no-nonsense piece of kit for anyone wanting to keep a .22 pistol shooting cleanly between range sessions, and it pairs naturally with Napier's other cleaning materials, oils and patches. Note that this rod is currently held as a legacy line at BushWear; contact us to check availability before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":40960684720328,"sku":"S8104","price":15.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/0ZgQ4OkKla0q9JuJ9vjbCYflAGf35Mq5-24.jpg?v=1631956876"},{"product_id":"parker-hale-2-piece-shotgun-rod","title":"Parker-Hale 2-Piece Shotgun Cleaning Rod 12-28G","description":"\u003cp\u003eThis Parker-Hale two-piece shotgun cleaning rod is turned from top-quality hardwood, with a swell handle shaped for a secure, comfortable grip during cleaning. The two sections join via solid brass cross-riveted joints, giving a sturdy, rattle-free connection that stands up to repeated use. Built to the universal UK spec, the rod is designed to fit shotguns from 12 gauge through to 28 gauge, taking standard male-thread cleaning attachments such as mops, jags and brushes, so one rod covers most gauges in a mixed cabinet. Its two-piece design breaks down small for storage in a gun cabinet or cleaning kit, while still giving enough length and rigidity to run a mop or brush the full length of a shotgun barrel. A well-made hardwood and brass rod like this is a straightforward, no-nonsense choice for keeping a shotgun's bore clean and rust-free after a day in the field, and it will pair with any standard cleaning accessories already in your kit.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , SRDA , SRD2","offers":[{"title":"2-Piece","offer_id":41035106451656,"sku":"S5825","price":28.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ViDnPKBHEiEJWGUoBvEusiJ55WM1dhLk-24.jpg?v=1632838720"},{"product_id":"bisley-rifle-rod-170-female-grey-rod-black-handle-32in","title":"Parker-Hale .170 Rifle Cleaning Rod 32in Black Handle","description":"\u003cp\u003eThis one-piece rifle cleaning rod from Parker-Hale is built for small-bore rifles taking a .170 (.17 to .177 calibre) female thread attachment, with a 32in rod and black handle. Like the rest of Parker-Hale's one-piece range, it uses a hardened and tempered steel core running through a tough acetate protective covering, so the rod itself can't mark or abrade the bore as it passes down the barrel. The handle spins on a ball-bearing fitting, letting brushes, mops and jags follow the rifling as you push them through rather than binding up, which gives a cleaner, more even pass than a fixed handle. Brass fittings at the working end resist corrosion in use. The female thread accepts standard Parker-Hale attachments — bronze brushes, jags and wool mops — sized for .17 and .177 calibre bores, making this a straightforward one-piece rod for stalkers and small-bore shooters who want a proper barrel clean without the joints and flex of a sectional rod. A sound, no-nonsense piece of maintenance kit for anyone running a .17-calibre rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default , RR170F","offers":[{"title":"Default Title","offer_id":41388419481800,"sku":"S5004","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/c37uOr9GICEaWiGf8J3fO4bsaDAMnO7C-24.jpg?v=1640265715"},{"product_id":"bisley-rifle-rod-270-male-yellow-rod-black-handle-44in","title":"Parker-Hale Rifle Rod .270 Male Yellow Black Handle 44in","description":"\u003cp\u003eParker-Hale's one-piece rifle cleaning rod is built with a hardened and tempered steel core beneath a tough acetate coating, so the rod glides down the bore without abrading the rifling. A ball-bearing handle spins freely in use, letting a brush or jag follow the barrel's twist rather than dragging across the lands, and the fittings are solid brass to resist corrosion over years of use. This version is finished as a yellow rod with a black handle, Parker-Hale's colour code for .270 calibre and upwards, and runs a full 44 inches, giving plenty of reach for longer centrefire rifle barrels. The male thread is cut to the Parker-Hale pattern, so it fits Parker-Hale jags, mops and brushes directly without an adapter, making it the natural choice for anyone already running a Parker-Hale cleaning kit. A dependable, purpose-built rod for maintaining a .270 or larger-calibre rifle.\u003c\/p\u003e","brand":"ship_aerosol: False , ship_battery: False , ship_restrict: DG , ship_dimensions: True , ship_explosive: False , Export_Restrict: True , Export_Block , LS_DPD Default , RR270ALX","offers":[{"title":"Default Title","offer_id":41452912771272,"sku":"S5002","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/MN5wynNgd4qJpuhRDmd5cHNlrYpvyVrh-24.jpg?v=1641654408"},{"product_id":"bisley-tubed-rifle-rod-22-female-grey-rod-red-handle-39-5in","title":"Parker-Hale TUBED Rifle Rod .22 Female Grey Rod Red Handle 3","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes. \u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":41902098120904,"sku":"S55854","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/4GQniHxitPJMG7Y3S91WYBrAZdNmwmkC-24.jpg?v=1652797034"},{"product_id":"bisley-tubed-rifle-rod-22-female-grey-rod-red-handle-44inch","title":"Parker-Hale TUBED Rifle Rod .22 Female Grey Rod Red Handle 4","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes. \u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":41902099333320,"sku":"S55856","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/4GQniHxitPJMG7Y3S91WYBrAZdNmwmkC-24_6ce82769-d387-4a1c-921e-ec13d94beccc.jpg?v=1652797069"},{"product_id":"bisley-tubed-rifle-rod-270-female-yellow-rod-black-handle-44in","title":"Parker-Hale TUBED Rifle Rod .270 Female Yellow Rod Black Han","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes.\u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":41902120173768,"sku":"S55860","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ZSdJXSlyEgJifvJdtTQWmrGezsRtoB9E-24_3ee56cff-d837-4eba-aa1c-1375938c9820.jpg?v=1652797985"},{"product_id":"bisley-tubed-pistol-rod-22-female-thread-11-5in","title":"Parker-Hale TUBED Pistol Rod .22 FEMALE THREAD 11.5in","description":"\u003cp\u003eParker-Hale's tubed pistol rod .22 female thread 11.5in — a genuine bit of field-sports kit, supplied by BushWear from the maker's current line. Solid, properly-built, sensibly priced.\u003c\/p\u003e\u003cp\u003eSized and finished to the maker's spec. See the specification list below for the detail, and contact BushWear if you need fitment or compatibility advice before ordering.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , LPBHA","offers":[{"title":"Default Title","offer_id":41907856867528,"sku":"S56595","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/BrAEqq8qMEFd4sUnTYMPvEv2udhmNVAI-24.jpg?v=1652951609"},{"product_id":"bisley-tubed-rifle-rod-270-female-yellow-rod-black-handle-39-5in","title":"Parker-Hale TUBED Rifle Rod .270 Female Yellow Rod Black Han","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes. \u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default , RRC","offers":[{"title":"Default Title","offer_id":42013966696648,"sku":"S55858","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ZSdJXSlyEgJifvJdtTQWmrGezsRtoB9E-24_3cfeb0ed-ef1c-48dd-979f-79abf39212e1.jpg?v=1656372572"},{"product_id":"bisley-tubed-rifle-rod-270-male-yellow-rod-black-handle-37in","title":"Parker-Hale TUBED Rifle Rod .270 Male Yellow Rod Black Handl","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes.\u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":43756340117704,"sku":"S55859","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/files\/ZSdJXSlyEgJifvJdtTQWmrGezsRtoB9E-24.jpg?v=1717136520"},{"product_id":"bisley-tubed-rifle-rod-270-male-yellow-rod-black-handle-44in","title":"Parker-Hale TUBED Rifle Rod .270 Male Yellow Rod Black Handl","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes.\u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":43832332091592,"sku":"S55955","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/files\/ZSdJXSlyEgJifvJdtTQWmrGezsRtoB9E-24_b85bc40f-d4c9-4e54-909a-0fcab9effc85.jpg?v=1718719279"},{"product_id":"bisley-tubed-rifle-rod-22-male-grey-rod-red-handle-37inch","title":"Parker-Hale TUBED Rifle Rod .22 Male Grey Rod Red Handle 37i","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes. \u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":43920562946248,"sku":"S55855","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/files\/4GQniHxitPJMG7Y3S91WYBrAZdNmwmkC-24_3d7b4512-9312-4786-ab23-f518fae46a99.jpg?v=1720247239"},{"product_id":"bisley-tubed-rifle-rod-22-male-grey-rod-red-handle-44inch","title":"Parker-Hale TUBED Rifle Rod .22 Male Grey Rod Red Handle 44i","description":"\u003cp\u003eThe one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.\u003cbr\u003e\u003cbr\u003eRed handle - small calibres.\u003cbr\u003eBlack handle - larger calibres.\u003cbr\u003eAvailable with either male for Parker-Hale brushes or female thread for popular American brushes. \u003c\/p\u003e","brand":", Export_Restrict: True , Express_Shipping , Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":44052354400456,"sku":"S55857","price":22.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/files\/4GQniHxitPJMG7Y3S91WYBrAZdNmwmkC-24.jpg?v=1724394323"},{"product_id":"parker-hale-tubed-rifle-rod-170-female-grey-rod-black-handle-32in","title":"Parker-Hale TUBED Rifle Rod .170 Female Grey Rod Black Handl","description":"The one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.","brand":", Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":44214850486472,"sku":"S128325","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/files\/0Ej5pH6IPiiN1cTRpdS1VY6Amabp9DWa-24.jpg?v=1730891153"},{"product_id":"parker-hale-tubed-rifle-rod-170-male-grey-rod-black-handle-37in","title":"Parker-Hale TUBED Rifle Rod .170 Male Grey Rod Black Handle","description":"The one piece rifle rods feature a special hardened and tempered steel core, ball bearing handle, brass fittings and a tough acetate protective covering to prevent barrel abrasion.","brand":", Export_Block , LS_DPD Default","offers":[{"title":"Default Title","offer_id":44214863200456,"sku":"S128326","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/files\/TrOhQqrAbuN8WsEIRNQ1mEbZmDUOPulr-24.jpg?v=1730892054"}],"url":"https:\/\/www.bushwear.co.uk\/collections\/rods.oembed?page=3","provider":"BushWear","version":"1.0","type":"link"}