{"title":"Scope Mounting","description":"","products":[{"product_id":"cz550-mount","title":"Pulsar CZ 550 Mount for Digisight and Apex Sights","description":"\u003cp\u003eThis is the dedicated Pulsar mount for fitting a Digisight or Apex sight to a CZ 550. The CZ 550 carries its own integral dovetail rather than a Picatinny or Weaver rail, so a purpose-made mount like this is the straightforward way to get a Pulsar unit sitting square and secure on the rifle. It clamps directly to the CZ 550 receiver and provides the interface the Digisight and Apex bodies attach to, holding the unit in line with the bore. Pulsar built it to sit lighter than comparable mounts and to keep the sight low over the barrel, which brings the optical axis closer to the bore line and makes for a more natural cheek weld and head position behind the rifle. For stalkers and night-shooting foxers running a CZ 550, that lower, lighter setup helps the rifle stay balanced and quick to bring onto the shoulder. It is a single-rifle, single-sight solution, matched to the CZ 550 dovetail and to Pulsar's Digisight and Apex range.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10605089751076,"sku":"S21873","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/QSIeuhvcxpSjwnM2xseqjGjxUoUceBmC-24.jpg?v=1569370787"},{"product_id":"scope-mounts-30mm-high-42-52mm-obj-tikka-15tm","title":"Warne Maxima 15TM 30mm High Tikka Scope Rings","description":"\u003cp\u003eThese Warne Maxima 15TM rings mount a 30mm scope tube directly onto the grooved dovetail receiver of a Tikka rifle, so there is no separate base to buy or fit. They are machined from solid steel and vertically split, giving a strong, even clamp that copes with heavy optics and stiff recoil alike. The high ring height clears larger objective bells, suiting the bigger scopes many stalkers run for low-light work at dawn and dusk. A Tikka-specific recoil pin locates positively in the receiver dovetail for a stronger bearing surface under recoil, while four T-15 Torx socket-cap screws hold each ring cap securely around the tube. This is a permanently attached, fixed mount rather than a quick-detach design, so it is built for a scope that stays put. The matte black finish keeps glare down in the field. Made in the USA to exacting tolerances, they fit the Tikka T3x, T3 and 695. Check your scope tube is 30mm and confirm your objective clears at high before ordering.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10616679399460,"sku":"322781","price":84.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/1jkHlGAzQdlGLUBVKIhY7vyEfkJ8Ge3m-24.jpg?v=1569371271"},{"product_id":"pa-ruger-77-mounts-30mm-med-14r7m","title":"Warne Maxima 30mm Medium Scope Rings Ruger M77 Dovetail 14R7M","description":"\u003cp\u003eThe Warne Maxima 14R7M is a pair of permanently attached 30mm medium scope rings designed to mount directly onto the Ruger M77's proprietary receiver dovetail, with no separate base required. Because the Ruger M77 (including Hawkeye variants) uses a tapered mounting surface, the rings in this pair are supplied as two different heights — a configuration unique to the Ruger M77 ring family — to sit level across the tapered receiver. Built from solid steel in a vertically split design, each ring uses four T-15 Torx socket cap screws to secure the scope tube, while a scalloped Ruger-specific recoil key provides positive engagement between ring and dovetail. The medium profile offers a saddle height of 0.460 inches, suitable for standard 40–50mm objectives on the M77. Rings weigh 6.1 oz as a pair and carry a matte black finish. Tighten bottom screws to 25 in\/lb on dry threads before setting eye relief and levelling the reticle, then torque the top screws to your scope manufacturer's specification. Made in the USA.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10616860082212,"sku":"322788","price":86.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/7xZNTzLeKez1r37pVIGOYQ7JpNDF2hl2-24.jpg?v=1569371275"},{"product_id":"30mm-blue-medium-rings-sako-tikka","title":"Optilock 30mm Medium Scope Rings Sako\/Tikka Blued","description":"\u003cp\u003eThe Optilock 30mm Medium rings are the factory-fit scope mounting rings for Sako and Tikka rifles, precision machined from solid steel and supplied in a traditional blued finish. Designed specifically to work with the integral tapered dovetail rails built into Sako and Tikka receivers, they provide the precise, close engagement that aftermarket rings cannot guarantee. The 30mm internal diameter suits the wider tube scopes increasingly popular on stalking and hunting rifles, while the medium height gives clearance for objective lenses on most standard-barrelled rifles. A patented spherical fastening ring simplifies scope installation and holds the tube in precise alignment, and a protective nylon sleeve guards the scope body against scratching during mounting. Rings are sold as pairs with all assembly hardware and a hex key included. This listing is for rings only — bases sold separately.\u003c\/p\u003e","brand":", Express_Shipping , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10643698024484,"sku":"322731","price":133.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/MX3nYJZHu7FAtFt16bIJCaVd0XoxyEnJ-24.jpg?v=1569372352"},{"product_id":"30mm-matte-med-pa-rings-214m","title":"Warne Maxima 214M 30mm Matte Medium Fixed Scope Rings","description":"\u003cp\u003eThe Warne Maxima 214M is a pair of 30mm steel scope rings in medium height with a durable matte black finish, designed to permanently attach to Weaver-style cross-slot bases and Mil-Spec Picatinny rails. Each ring incorporates Warne's square stainless steel recoil control key in both the front and rear ring, giving a no-slip positive engagement across the full width of the base slot and standing up to the heaviest recoil from big-bore stalking rifles. The square key also guards against swaging or peening of softer base materials over repeated mounting and dismounting. A vertically split design with a substantially wide band gives a firm, secure clamping surface around the scope tube, while four Torx-style T-15 socket cap screws (torqued to 25 in\/lb) hold the optic firmly in place once eye relief and reticle levelling are set. Fitting a 30mm scope tube with an objective lens up to 52mm, these American-made rings suit hunters and stalkers who want a rock-solid, permanently fixed mounting solution rather than a quick-detach system.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10647430856740,"sku":"S23133","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/fHghBmUWKyu3l1hd3xgQwqRdg1ixjLsE-24.jpg?v=1569372607"},{"product_id":"medium-mounts-blue-1-weaver-style-201m-pa-36-42mm-obj","title":"Warne Maxima 1\" Medium Scope Rings Weaver\/Picatinny 201M","description":"\u003cp\u003eThe Warne Maxima 201M scope rings are a fixed, permanently attached 1\" medium height ring set designed for use on Weaver-style cross-slot bases and Mil-Spec Picatinny rails. Made in the USA from steel, the Maxima rings are built around a vertically split design that provides strong, even clamping pressure on the scope tube, and both front and rear rings incorporate Warne's square stainless steel recoil control key. This key engages fully across the base slot to resist scope shift under recoil, and the wider ring band adds further clamping surface around the scope body. The 201M accommodates scopes up to 42mm objective diameter and weighs 5.2 oz for the pair. Four Torx T-15 socket cap screws secure each ring half; these are permanently fitted to the base rather than quick-detach. A good value ring set for stalking and hunting rifles fitted with Weaver or Picatinny bases.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , 322751","offers":[{"title":"Default Title","offer_id":10647487021092,"sku":"322751","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/fogS7KHGnIiHkZSE79maHqFLtkbW2x4E-24.jpg?v=1569372609"},{"product_id":"to78-mounts-two-piece-weaver-medium-30mm-tube","title":"Sportsmatch TO78 Two-Piece Weaver Mounts 30mm Medium","description":"\u003cp\u003eThe Sportsmatch TO78 is a two-piece scope mount built for 30mm tube riflescopes on Weaver or Picatinny rails, in the medium height option. Each ring uses a double-clamp design, secured by an Allen-head cap and a thumb-nut base, with a square-section high-tensile steel arrestor bolt keying into the rail for a positive, rock-solid lock against recoil. The mounts are sized to take scopes with an objective lens up to 45mm, covering most stalking and vermin-control optics in this tube diameter. Like the rest of the Sportsmatch range, the TO78 is manufactured in Great Britain on CNC machinery, with every component hand-inspected before assembly to ensure correct alignment and a dependable grip on both rifle and scope. Sportsmatch backs its mounts with a lifetime guarantee, reflecting the quality control built into manufacture. For shooters running a 30mm-tubed scope on a Weaver or Picatinny-railed rifle who need a medium-height, no-nonsense mounting solution, the TO78 two-piece set is a proven, British-made choice.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMW30TM","offers":[{"title":"Default Title","offer_id":10654290411556,"sku":"S3430","price":75.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/fSpBulWeb0UWOcAk2ZWyrRQzBEv4RHEY-24.jpg?v=1569372869"},{"product_id":"hto83-mounts-two-piece-17mm-dovetail-cz550-p-hale-high-25mm","title":"Bisley HTO83 High Two-Piece Scope Mounts 17mm Dovetail","description":"\u003cp\u003eThe Bisley HTO83 is a two-piece high scope mount built for rifles with a 17mm dovetail, covering the CZ550, CZ557 and ZKK600\/601\/602 actions as well as appropriate Parker Hale bases. Machined to fit 1in (25mm) diameter scope tubes, the high profile gives clearance for objective lenses up to 56mm, so bulkier hunting scopes sit clear of the barrel and action. Each ring uses a double-clamp design with four bolts per cap, tightened with the Allen keys supplied, for a secure, vibration-resistant hold under recoil. A removable recoil arrestor pin locates into the dovetail to stop the mount shifting under heavy calibres, and can be taken out where the base doesn't need it. As with the rest of the range, these mounts are made in England to keep tolerances tight so the scope stays zeroed. A straightforward, no-nonsense mounting solution for stalkers and rifle shooters running a 17mm dovetail action who need extra height for a larger-objective scope.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10658138259492,"sku":"S18184","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/y2RM4azERnWtmYXilvAw7t1PUNpFTNB7-24.jpg?v=1569373021"},{"product_id":"to86-mounts-two-piece-17mm-dovetail-cz550-p-hale-medium-30mm","title":"Bisley TO86 Mounts, 30mm, CZ550\/Parker-Hale Dovetail","description":"\u003cp\u003eThe Bisley TO86 is a two-piece scope mount with a 30mm body tube in medium height, built to fit the 17mm dovetail rail found on CZ550, CZ557 and ZKK600\/601\/602 actions, along with the appropriate Parker-Hale bases. The 17mm dovetail measures roughly 19mm at its widest point at the top, and this mount is sized to take scopes with an objective lens up to 55mm in outer diameter, covering the great majority of hunting and varminting optics used on these rifles. As a two-piece mount rather than a one-piece rail, it's straightforward to fit and remove without disturbing the action, and the solid 30mm rings hold a scope securely under recoil so zero doesn't shift between shots. It's built to the standard expected of a proper stalking or vermin-control rifle, rather than a generic universal mount, so it drops straight onto CZ550-pattern actions and Parker-Hale bases without packing or modification. A dependable, correctly sized mount for anyone running a 30mm scope on a CZ550, CZ557, ZKK or Parker-Hale-based rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10658211758116,"sku":"S16444","price":65.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/xS9X06qHrbqZEI4FQjHOShMvSMSjYhKt-24.jpg?v=1569373022"},{"product_id":"tmb3-mounts-two-piece-theoben-rapid-7-30mm-tube","title":"Bisley TMB3 Two-Piece Scope Mounts, Theoben Rapid 7 30mm","description":"\u003cp\u003eThe Bisley TMB3 is a two-piece scope mount set built specifically for the Theoben Rapid 7 air rifle, taking 30mm diameter scope tubes. Each mount uses a double-clamp design with four Allen key bolts per cap for a secure hold on the scope tube, with Allen keys supplied for fitting. The mount base uses the Theoben Rapid's own non-standard fitting rather than a conventional dovetail, so it's matched to this rifle rather than a universal fit. With the dovetails flush to the barrel, the mounts will clear an objective lens up to 56mm in diameter; bear in mind that scopes with front parallax adjustment often need a touch more clearance, so it's worth checking your scope's objective housing before ordering. Height to the base of the scope tube is 20mm, with a mount base width of 21mm. As with any two-piece mount, fit both halves square to the rifle and torque the clamp bolts evenly to avoid stressing the scope tube. A straightforward, no-nonsense way to get a 30mm scope mounted securely and correctly aligned on the Theoben Rapid 7.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM30TTR7 , BIM30TTR7","offers":[{"title":"Default Title","offer_id":10658216116260,"sku":"S3415","price":64.61,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/zuyHgUqbScTepLLSmpTx1a07RIWA7XwZ-24.jpg?v=1569373022"},{"product_id":"dm60-mounts-one-piece-dampa-dovetail-high-25mm-tube","title":"Bisley DM60 One-Piece Dampa Dovetail High 25mm Mount","description":"\u003cp\u003eThe Bisley DM60 is a one-piece Dampa scope mount built for dovetail-rail rifles, sized for a high mounting position and a 25mm (1 inch) scope tube. The Dampa system uses rubber bushes within the mount body to absorb recoil shock before it reaches the scope, so the sight returns to the same position shot after shot rather than creeping under repeated recoil — a genuine benefit on hard-kicking spring-piston and gas-ram air rifles where lesser mounts can damage a scope's internals or shift zero. The reversible clamp accepts dovetails from 9.5 to 11.5mm, and four-bolt top rings with four-bolt bases give a secure, low-flex fit that suits scopes with an objective lens up to 50mm. A removable stop pin locates the mount against recoil without needing to be left permanently in place. Built as a one-piece unit rather than two separate rings, it's simpler to fit true and keeps the scope properly aligned with the bore. A solid, no-nonsense choice for shooters wanting their zero to hold.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMODAA , BIMODAM","offers":[{"title":"Default Title","offer_id":10658273001508,"sku":"S3672","price":126.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/RhWJPfU3q7CjKPx1eQlQITGmTq4zM8y0-24.jpg?v=1569373022"},{"product_id":"heto68c-mounts-two-piece-extended-weaver-high-30mm-tube","title":"Bisley HETO68C Extended Weaver Scope Mounts 30mm High","description":"\u003cp\u003eThe Bisley HETO68C is a two-piece, double-screw extended scope mount for 30mm tube scopes, built to fit any Weaver or Picatinny rail. The long front mount measures 46mm and gives 25mm of extension to the scope mounting points, moving the scope forward for a better eye relief position on rifles where standard mounts sit too far back. Set in a high profile, the mounts suit scopes with an objective lens up to 56mm, keeping the tube clear of the barrel and action. Each mount includes a square-section, high-tensile arrestor bolt to lock the ring firmly to the rail and resist recoil creep. Made by Sportsmatch under the Bisley brand from precision-engineered materials, these mounts are built to the same standard trusted by target shooters and stalkers alike. A solid, no-nonsense choice for anyone fitting a 30mm scope to a Weaver or Picatinny-railed rifle who needs the extra forward reach a standard mount cannot give.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMW30TEH , BIMW30TEH","offers":[{"title":"Default Title","offer_id":10658420686884,"sku":"S3427","price":236.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/7gMTCojOjDlSBY4lTLndHGAkPfD1xjMO-24.jpg?v=1569373047"},{"product_id":"54447-standard-bases-2-pce-tikka-m595-t3","title":"Leupold STD Tikka T3\/T3x 2-Piece Scope Base, Matte","description":"\u003cp\u003eThis is Leupold's steel Standard (STD) two-piece scope base, machined to fit the Tikka T3 and T3x receiver and finished in low-glare matte black. The STD system is among the most versatile mounting setups Leupold makes, and it pairs with STD rings (sold separately) to carry your scope. The rear of the mount is secured by opposing windage screws, so you can dial out a fair amount of lateral error during bore-sighting and keep the scope's internal windage adjustment in reserve for fine sight-in. Shims can be added under the rings for gross elevation changes, leaving the scope's elevation turret free for bullet-drop compensation. Made from steel rather than alloy, it suits standard calibres up to .300 Win Mag, making it a sound, no-nonsense choice for a stalking or deer rifle built on the Tikka action. It mounts with a base-to-receiver screw torque of 22 in-lbs and windage screws torqued to 45 in-lbs, and like all Leupold mounts it carries the firm's lifetime guarantee. Made in the USA.\u003c\/p\u003e","brand":", Express_Shipping , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10660498931748,"sku":"323248","price":28.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/FT8XrvGzsRY6hU75X3Dpf00ytFDQ9MTX-24.jpg?v=1569373102"},{"product_id":"sp4-side-mounted-spirit-level","title":"Bisley SP4 Side-Mounted Spirit Level for Scope Mounts","description":"\u003cp\u003eThe Bisley SP4 is a side-mounted spirit level kit made in the UK by Sportsmatch, designed to eliminate rifle cant and improve accuracy at longer ranges. It fits all Sportsmatch dovetail scope mounts that use M5 dovetail clamp screws – the larger side screws on the mount base. Installation is straightforward: the standard M5 clamp screw is replaced with a shorter M5 screw supplied in the kit, and the spirit level unit threads in to the same hole. The bubble is positioned to remain visible in peripheral vision while the eye stays at the scope eyepiece, so the rifle can be levelled without breaking the shooting position. At only 8g the SP4 adds no meaningful weight and will not affect balance. The black anodised aluminium housing is compact and robust. A practical addition for any shooter using Sportsmatch mounts who wants a quick, reliable cant reference for field shooting or zeroing.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMSK , BIMSK","offers":[{"title":"Default Title","offer_id":10662755106852,"sku":"S3423","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/WEe0CX2puhWZOfXdCcGwQ4lLredwhxcZ-24.jpg?v=1569373205"},{"product_id":"to50c-mounts-two-piece-17mm-dovetail-cz550-p-hale-med-25mm","title":"Bisley TO50C Two-Piece Scope Mounts CZ550\/P-Hale Med","description":"\u003cp\u003eThe Bisley TO50C is a two-piece scope mount set built for rifles with a 17mm dovetail rail, including the CZ550 and compatible Parker Hale bases. Made in the Sportsmatch range and supplied by BushWear from the maker's current line, the mounts clamp directly onto the rifle's dovetail, giving a solid, repeatable mechanical fit between rifle and scope so zero holds under recoil. This is the medium-height option, taking a 25mm scope tube and sized to suit scopes with an objective lens up to 50mm without fouling the barrel or action. As with all Bisley\/Sportsmatch mounts, height and tube diameter are matched to specific rifle and scope combinations, so it's worth checking your CZ550 or Parker Hale action's dovetail width and your scope's tube size against this listing before ordering. Straightforward, no-nonsense mounting hardware for getting a scope securely and correctly aligned on a CZ or Parker Hale-pattern rifle.\u003c\/p\u003e","brand":", ShippingGroup: SML , Express_Shipping , Export_Block , LS-RM Default , BIMTCZ","offers":[{"title":"Default Title","offer_id":10662764118052,"sku":"990733","price":46.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/6SUjgsKhvDoUMs4EW5KvO79BJNNwJuN4-24.jpg?v=1569373205"},{"product_id":"hto36c-mounts-two-piece-dovetail-high-30mm-tube","title":"Bisley HTO36C Two-Piece High Scope Mounts 30mm","description":"\u003cp\u003eThe Bisley HTO36C (also sold under the Sportsmatch name) is a two-piece, high-profile scope mount set for 30mm tube scopes, built to fit rifles with 9.5-11.5mm dovetail rails — the standard fitting on most modern BSA air rifles and similar dovetail-cut actions. Each ring uses a four-bolt top cap and two-bolt base, clamping the scope securely while allowing fine adjustment during fitting. The high mounting height gives generous clearance for scopes with objective lenses up to 56mm, so larger, more capable optics can be fitted without the bell touching the barrel or action. A removable arrestor pin locates into the rail to stop the mount creeping under recoil, and can be taken out where the rail doesn't need it. CNC-machined for a precise, repeatable fit, these are a straightforward, no-nonsense way to get a 30mm-tube scope mounted securely and at the right height for a comfortable cheek weld. Ideal for anyone upgrading to a larger-bodied scope on an existing dovetail-railed rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMTA , BIM30TH","offers":[{"title":"Default Title","offer_id":10662772998180,"sku":"S3222","price":44.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/QtjKtYct0ErRZPqQsAAoTskQGwxWd0g3-24.jpg?v=1569373206"},{"product_id":"hto73-mounts-two-piece-15mm-dovetail-tikka-brno-high-30mm","title":"Sportsmatch HTO73 Two-Piece 30mm High Mounts, 15mm Dovetail","description":"\u003cp\u003eThe Sportsmatch HTO73 is a two-piece, high-profile scope mount built for 30mm body tube scopes on rifles with a 15mm dovetail, principally the Tikka T3 and T3x, plus Tikka M55, M65, M590, M595 and M695 actions. It also fits early Brno Model 1 and Model 2 .22 rifles, though Sportsmatch advises checking rear sight clearance on these before fitting. The high mount gives enough elevation for scopes with an objective lens up to 56mm on most rifles, keeping the front bell clear of the barrel while maintaining a solid cheek weld. Each mount is machined in Great Britain from aircraft-specification high-tensile material and includes a removable arrestor pin to lock the rear ring against recoil on Tikka actions. The two-piece design lets you space the rings to suit your scope's tube length and set eye relief precisely. Sportsmatch backs the mount with a lifetime warranty, and it's the same fixing trusted by target shooters, pest controllers and stalkers who need their zero to hold shot after shot.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM30TT , BIM30TT","offers":[{"title":"Default Title","offer_id":10662782435364,"sku":"S3414","price":77.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/iZqtYXro6dj2NUV7ijphRrq13X7Ehh9D-24.jpg?v=1569373208"},{"product_id":"rb6-weaver-picatinny-to-dovetail-adapters-pair","title":"Bisley RB6 Weaver\/Picatinny to Dovetail Adaptors Pair","description":"\u003cp\u003eBisley's RB6 rail adaptors solve a common mounting headache: a scope base drilled for traditional 9.5-11.5mm dovetail rings fitted to a rifle with a Weaver or Picatinny rail. Sold as a pair, the adaptor blocks clamp onto the Weaver\/Picatinny rail and present a dovetail interface on top, letting you fit your existing dovetail mounts and rings rather than buying a whole new set to match the rail. This is particularly handy on air rifles and rimfire rifles, where Weaver\/Picatinny rails have become common but a lot of scope mounts already on the market — and already in shooters' kit bags — are still cut for the older dovetail standard. Being genuine Bisley Sportsmatch parts, they're made to a proper engineering tolerance rather than a loose universal fit, so once torqued down they hold zero as well as a rail matched to the mount from the factory. A simple, sensibly priced fix rather than a false economy of buying twice.\u003c\/p\u003e","brand":", ShippingGroup: SML , Export_Block , LS-RM Default , BIMAD","offers":[{"title":"Default Title","offer_id":10662784925732,"sku":"S3417","price":77.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/7RBhHqQdBhmiAdp5CHdCDLdrtxxmU4KP-24.jpg?v=1569373208"},{"product_id":"tm4-torch-mount-for-30mm-tubes","title":"Bisley TM4 Torch Mount for 30mm Scope Tubes","description":"\u003cp\u003eThe Bisley TM4 is a quick-detach torch mount built for lamping and night-time pest control, letting you run a lamp alongside a 30mm scope tube without disturbing your zero. It fits most torches with a 1in diameter body, and mounts in one of two ways: it can replace the top cap on a Sportsmatch scope mount for an extremely solid fixing, or it can be clamped directly to the scope tube where no Sportsmatch mount is fitted. The quick-release mechanism lets you pull the torch off in seconds, so the rifle still fits in its case without any dismantling. At around 60mm from the centre of the scope tube to the centre of the torch, it holds the lamp clear of the sight picture, and at roughly 100g it adds negligible weight to the rifle. A straightforward, solidly made accessory for anyone doing after-dark vermin or predator control with a 30mm-tubed scope.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMTOA , BIM30TO","offers":[{"title":"Default Title","offer_id":10662788431908,"sku":"S3675","price":88.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/sDvu8hstm7ZPk9zNmkpAENChrrRiLjqF-24.jpg?v=1569373209"},{"product_id":"hto81-mounts-two-piece-15mm-dovetail-tikka-brno-high-25mm","title":"Bisley HTO81 Two-Piece Scope Mounts 15mm Dovetail High","description":"\u003cp\u003eThe Bisley HTO81 is a two-piece, double-screw scope mount for rifles with a 15mm (or 17mm) dovetail rail, most notably Tikka actions and similar Brno bolt-action rifles. Manufactured by Sportsmatch and sold under the Bisley name, it is supplied in a high ring height with a 25mm (1 inch) tube diameter, giving clearance for scopes with an objective lens up to 56mm on most rifles without the bell touching the barrel or rail. Base-to-rail height is 22mm, taller than the equivalent medium mount, so it suits larger-objective scopes or rifles needing extra clearance. A removable steel arrestor pin locates in the rail to stop the mount creeping under recoil, then lifts out cleanly if it isn't needed. Each ring uses a double-clamp design with Allen key bolts (four bolts per cap), and the Allen key is supplied. Made from robust steel construction, these are a straightforward, no-nonsense way to get a 1 inch scope securely bedded on a Tikka or compatible dovetail action, whether for stalking, vermin control or target work.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10662806093860,"sku":"S18185","price":43.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/t1fgzqSzlFuQIjKrBD77dqvDhEsrshJA-24.jpg?v=1569373211"},{"product_id":"eto9c-mounts-two-piece-extended-dovetail-medium-25mm-tube","title":"Bisley ETO9C Two-Piece Extended Scope Mounts, Medium","description":"\u003cp\u003eThe Bisley ETO9C is a two-piece, extended-reach scope mount for rifles and air rifles with 9.5-11.5mm dovetail rails, built to take a 25mm (1in) scope tube. \"Extended\" means the rings sit further forward than a standard mount, giving you the option to move the scope back or forward to dial in the correct eye relief for your setup and shooting position. The medium height rings suit scopes with an objective lens up to 45mm in diameter without an adjustable-objective bell fouling the barrel or mount. Each mount uses a four-bolt top ring and two-bolt base for a secure, low-movement fit, with a removable stop pin to key the mount to rifles that need it and free rotation for those that don't. Sold as a genuine Bisley (Sportsmatch) two-piece set, these mounts are a sensible choice for stalkers and target shooters who need extra scope adjustment range without stepping up to a one-piece mount. Contact BushWear before ordering if you need help confirming rail width or ring height for your rifle and scope combination.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMTEA , BIMTEM","offers":[{"title":"Default Title","offer_id":10662859866148,"sku":"S5727","price":46.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/qwhV0y71DMLc3ah1rG2Je7YcJcnc9Cqd-24_5b48f01c-62fa-4e2d-a423-9abbd89cdc10.jpg?v=1569373225"},{"product_id":"49907-std-rings-only-1super-high-need-bases","title":"Leupold STD 1\" Super High Rings Matte (Part 49907)","description":"\u003cp\u003eThese are Leupold's Standard (STD) scope rings in a 1-inch diameter and Super High height, finished in matte black. They fit any riflescope with a 1-inch maintube and are designed to pair with Leupold STD one-piece or two-piece bases, which are sold separately. Machined from steel for a secure, repeatable hold, the front dovetail ring pivots so you can make lateral adjustments using the rear windage screws while bore sighting; shims can also be used, keeping the scope's own elevation travel free for bullet drop compensation. The Super High height gives generous clearance for larger objective bells, which suits stalking and hunting scopes mounted on bolt-action rifles. Leupold rates this STD ring set for calibres up to .300 Win. Mag., and recommends 28 in-lbs on the ring top screws and 45 in-lbs on the windage screws. The set weighs around 3.3 oz and is made in the USA. As with all Leupold mounts, the connection between scope and rifle is built to hold zero through hard field use, backed by the maker's lifetime guarantee.\u003c\/p\u003e","brand":", Express_Shipping , Export_Block , LS-RM Default , 323249","offers":[{"title":"Default Title","offer_id":10668763086884,"sku":"323249","price":28.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/L7z2qpsgID8lMDibnzRihG8bEO4QoESk-24.jpg?v=1569373453"},{"product_id":"tikka-bases","title":"Optilock Tikka Scope Mount Bases – Solid Steel, Pairs","description":"\u003cp\u003eOptilock Tikka Bases are precision-machined solid steel scope mounting bases designed specifically for Tikka bolt-action rifles. Part of the established Optilock two-piece mounting system, these bases are the foundation for attaching Optilock rings and securing a riflescope in a repeatable, zero-retaining position. The bases are machined to close tolerances for a secure, gap-free fit to Tikka's integral receiver rail, with all assembly hardware included for straightforward fitting. The Optilock system's angular contact geometry between base and ring makes tightening positive and prevents accidental rotation, while polymer ring inserts protect the scope body from clamping damage. Available in blued finish and stainless steel variants. Supplied as a pair with all necessary fasteners.\u003c\/p\u003e","brand":", Express_Shipping , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10669113114660,"sku":"322728","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/uaDxFrNNY4CQPCa833JlN1EaE3yJeBqO-24.jpg?v=1569373463"},{"product_id":"1-med-rings-only-sako-tikka-blue-s1300961","title":"Optilock 1\" Medium Scope Rings Sako\/Tikka Blued S1300961","description":"\u003cp\u003eThe Optilock 1\" Medium rings (S1300961) are the genuine factory scope mounting rings for Sako and Tikka rifles, precision machined from solid steel and finished in a traditional blue. Built to engage precisely with the integral tapered dovetail rails on Sako and Tikka receivers, they offer the close, accurate fit that makes these rings the preferred choice for owners of these Finnish rifles. The medium height profile provides a little extra clearance over low rings, making them better suited to scopes with larger objective lenses where the tube needs to sit higher above the barrel. A patented spherical fastening ring aids accurate alignment when fitting the scope, and a protective nylon sleeve around the ring cap prevents the scope body being scratched during mounting. Rings are supplied clamshell-packed in pairs with all assembly hardware and a hex key. This is the 1\" medium height variant in blued steel, part number S1300961.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10669677903908,"sku":"322733","price":133.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ErRf5uptJLLCf1MieAZt83o7X8XAoyPw-24.jpg?v=1569373501"},{"product_id":"mrs-mounting-rail-set","title":"Swarovski MRS Mounting Rail Set for STR Spotting Scope","description":"\u003cp\u003eThe Swarovski MRS Mounting Rail Set is a dedicated accessory for the STR spotting scope, giving you a quick, repeatable way to attach Picatinny-compatible devices. The set comprises three individual Picatinny rails. Two are the same longer size, while the shortest carries an integrated front and rear sight, letting you line up on a subject quickly before settling in behind the glass. Fitting is straightforward, so you can add or swap accessories in the field without fuss. As a standard Picatinny interface, the rails accept connection devices already built to the same pattern, which keeps your STR set-up flexible whether you are ranging, observing or directing a shot on the hill. Made by Swarovski Optik in Austria, the rails are finished to the standard expected of the brand and are designed to work in harmony with the STR rather than as a generic add-on. For stalkers and hill walkers who run an STR alongside the rifle, it is a sensible way to standardise mounting and get a fast initial aim before fine observation.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10670407778340,"sku":"S12069","price":196.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/5BIagUF0dS2ZVoc4QLHYrwzF99fmK2FS-24.jpg?v=1569373598"},{"product_id":"steel-lok-quick-release-steel-mounts-30mm-diameter-5-8-weaver-dovetail-high","title":"Nikko Stirling STEEL-LOK 30mm Weaver Mounts, High","description":"\u003cp\u003eNikko Stirling's STEEL-LOK Quick Release mounts are machined from solid steel for a field-tested, precise fit that holds zero shot after shot. This pair is sized for 30mm scope tubes, in the high setting, and fits Weaver\/Picatinny rails rather than a traditional dovetail. Each ring is fitted with a thumb-operated quick-detachable lever, so the scope can be removed and refitted quickly without tools, and without losing point of impact — useful if you run more than one scope or need to strip the rifle down for cleaning or transport. The strong steel construction and matte black finish are built to stand up to hard use in the field, and the STEEL-LOK range is available in low, medium and high heights and in both 30mm and 1-inch diameters, so it's worth checking the height and tube diameter against your own scope before ordering. A solid, no-frills mounting solution for anyone who wants their scope to stay exactly where they left it.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10671392423972,"sku":"S16182","price":52.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/0eDO87WKcBFYyx93v5Cm1HwbfZQiteVJ-24.jpg?v=1569373669"},{"product_id":"hop77-mounts-one-piece-weaver-high-30mm-tube","title":"Bisley HOP77 One-Piece 30mm Weaver Scope Mount – High","description":"\u003cp\u003eThe Bisley HOP77 is a one-piece cantilever scope mount designed for AR-type rifles running 30mm scope tubes. Manufactured in the UK by Sportsmatch and sold under the Bisley label, it solves the short-receiver eye-relief problem common on AR15 platforms by positioning the scope 63mm (2.5 inches) forward of the attachment point. The full-length Maxiclamp Picatinny rail section, measuring 55mm, grips the receiver rail across a large surface area and is secured by two knurled thumb wheels to resist movement under recoil. The ring cradles any 30mm main-tube scope with an objective lens up to 50mm diameter, and four Allen-head ring bolts clamp the tube securely – an Allen key is supplied. CNC-machined throughout, the mount weighs 170g and sits at a high profile to clear larger objectives. Total mount length is 120mm.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM30OWH , BIM30OWH","offers":[{"title":"Default Title","offer_id":10703455060004,"sku":"S3412","price":133.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/7KzAptnHF9SaG3DTcItzFQnBxPW0Gde2-24.jpg?v=1569376026"},{"product_id":"hto82-mounts-two-piece-15mm-dovetail-cz527-fox-high-25mm-tub","title":"Bisley HTO82 Two-Piece High Scope Mounts, 15mm Dovetail","description":"\u003cp\u003eThe Bisley HTO82 is a two-piece scope mount set built for rifles with a 15mm dovetail rail, covering CZ 527, Brno Model 1\/2 and Fox actions. Each mount is machined to take a 1 inch (25.4mm) diameter scope tube and is finished in the high height, giving clearance for objective lenses up to 56mm when the dovetails sit flush with the barrel — useful if your scope has a large front bell or side parallax housing. An arrestor pin is included to locate the mount correctly on CZ-pattern rails and take the recoil load off the clamp screws alone. Each ring uses a double-clamp design with four Allen bolts per cap, and the Allen key is supplied, so fitting and torquing up is straightforward with ordinary tools. As with any dovetail mount, check your rifle's rail width and your scope's tube diameter before ordering, since these mounts are a non-standard fitting specific to the CZ\/Brno\/Fox pattern rather than a universal 3\/8in or 11mm dovetail. A sound, no-nonsense way to get a 1 inch scope securely and repeatably mounted on a CZ-pattern rimfire or rifle.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10734185119780,"sku":"S18183","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/UEsFtx8Es0dRhpCeir77NbVd3EfgT2fq-24.jpg?v=1569378724"},{"product_id":"to6c-mounts-two-piece-13mm-dovetail-medium-25mm-tube","title":"Bisley TO6C 1\"\/25mm Medium Two-Piece 13mm Dovetail Mounts","description":"\u003cp\u003eBisley's TO6C mounts are a two-piece, double-screw scope mount for 1\"\/25mm tube scopes, built for rifles with a 13mm dovetail — the fitting found on most modern BSA air rifles, the CZ452 American and early Weihrauch HW35. Set at a medium height, they'll clear scopes with an objective lens up to 45mm in diameter without the front bell fouling the barrel or action. Each mount includes a removable arrestor pin, which locates into the dovetail to stop the scope creeping under recoil — simply leave it out if your rifle's dovetail doesn't need it. The double-screw clamp fixing gives a secure grip on the rail and holds a scope's zero reliably once torqued up. A straightforward, no-nonsense mounting solution for anyone re-scoping a springer or gas-ram air rifle with the older 13mm dovetail spec, rather than the more common 11mm rail.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM13TM , BIM13TM","offers":[{"title":"Default Title","offer_id":10735301558308,"sku":"992759","price":53.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/X7I4pbuqgABCWPvccOTZlXCnWasN3VMZ-24.jpg?v=1569378871"},{"product_id":"dm80-mounts-one-piece-dampa-weaver-high-25mm-tube","title":"Bisley DM80 One-Piece Dampa Weaver Mount, High 25mm","description":"\u003cp\u003eThe Bisley DM80 is a one-piece Dampa scope mount built for rifles with a Weaver or Picatinny rail, taking a 1\" (25mm) diameter scope tube and fitting lenses up to 56mm in diameter. It's a high mount, so there's plenty of clearance for larger objective lenses over the barrel. The standout feature is the Dampa system: the mount body sits on small rubber bushes that absorb the sharp, two-way recoil pulse of a spring-piston or gas-ram air rifle, cushioning the scope's internals against the kind of jarring impact that causes lens damage, spring wear or a shifting zero over time. Because it clamps directly onto Picatinny-spec rails rather than dovetails, fitment is straightforward and repeatable if the mount is ever removed and refitted. Machined from aircraft-specification aluminium and built in Great Britain, it's aimed at owners of high-powered air rifles as well as large-calibre centrefire rifles who want a genuinely solid, damage-resistant scope mounting solution rather than a rigid mount that transmits every jolt straight to the optic. Note it is designed for Picatinny-pattern rails only, not standard dovetails.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMOWD , BIMOWD","offers":[{"title":"Default Title","offer_id":10743519707172,"sku":"S3422","price":126.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/P7VB2H5jSBS6tjT0UUH0mAB0aqQJAvCI-24.jpg?v=1569379517"},{"product_id":"atp34-mounts-two-piece-dovetail-extra-high-34mm-tube","title":"Bisley ATP34 Two-Piece Extra High Dovetail Scope Mount","description":"\u003cp\u003eThe Bisley ATP34 is a two-piece, extra-high scope mount built for 34mm body tube scopes on dovetail-based rifles. It fits 3\/8in (9.5mm-11.5mm) dovetail rails, the standard grooved receiver found on most air rifles and rimfire and centrefire sporting rifles, and its extra-high profile gives clearance for objective lenses up to 60mm diameter, useful where a large-bell scope needs to clear the barrel or a raised cheekpiece. Each ring offers up to 40 MOA of vertical adjustment: elevation is set precisely with the enclosed Allen key and then locked in place with Bisley's double-screw clamp, so the mount can be tuned to zero without shimming. A removable EASYFIT arrestor pin locates the mount securely on the rail and prevents it shifting under recoil. The mount measures 24-25.3mm at its inner ring diameter and 21mm in height, and weighs 133g. It is covered by registered design No. 4023419. A solid, adjustable option for stalkers and shooters running a 34mm-tube scope who need extra height and fine elevation control on a dovetail rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM34TXH , BIM34TXH","offers":[{"title":"Default Title","offer_id":10743741218852,"sku":"S3416","price":190.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/LivPdZNg49IsVhLucRrCRnpJTdle5M5g-24.jpg?v=1569379541"},{"product_id":"dm70-mounts-one-piece-dampa-dovetail-high-30mm-tube","title":"Bisley DM70 One-Piece Dampa High Mount 30mm Tube","description":"\u003cp\u003eThe Bisley DM70 is a one-piece Dampa scope mount built for airguns and rifles with a heavy recoil impulse. Machined in the UK to a high dovetail profile, it clamps a 30mm scope tube directly to a 9.5-11.5mm dovetail rail via a reversible double-screw clamp, giving a rock-solid fit with no need for separate rings. The Dampa system uses rubber bushes within the mount body to absorb the sharp recoil shock of spring-piston and gas-ram air rifles before it reaches the scope, protecting the internals from the reverse-recoil forces that cause lens and reticle damage over time and cutting down how often you need to re-zero. A retractable recoil stop pin locates into the rail to stop the mount creeping under repeated firing. The high build gives clearance for scopes with objective lenses up to 56mm, keeping the sight line clear of the barrel and magazine. Supplied by BushWear, this is a dependable, purpose-built mount for anyone running a large-objective scope on a hard-recoiling springer.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMODAA , BIM30OD","offers":[{"title":"Default Title","offer_id":10763653808164,"sku":"S3671","price":103.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/RhWJPfU3q7CjKPx1eQlQITGmTq4zM8y0-24_96a3ca92-cecc-4793-a954-7eab40637964.jpg?v=1569381031"},{"product_id":"hto36c-mounts-two-piece-13mm-dovetail-high-30mm-tube","title":"Sportsmatch HTO36C 30mm High Mounts 13mm Dovetail","description":"\u003cp\u003eSportsmatch's HTO36C is a two-piece high scope mount built for 13mm dovetail rails, the fitting found on most modern BSA air rifles and the early Weihrauch HW35. Machined in England to Sportsmatch's usual precision, each ring clamps the dovetail with a double-screw fixing on both bases for a secure, even grip that resists shifting under repeated recoil, while a removable arrestor pin locates into the action where the rifle is cut to take one, adding extra security against creep. The rings take 30mm scope tubes and are sized to clear objective lenses up to 56mm, so most rimfire and airgun-hunting scopes will sit comfortably without touching the barrel or action. At 21mm high and 21mm wide, they lift the scope enough for a clean cheek weld on typical air rifle stocks. Allen keys for both the ring and clamp screws are supplied, so fitting is straightforward with basic tools. A dependable, no-nonsense mounting solution for anyone running a 13mm-dovetail air rifle who wants their optic to stay zeroed.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM1330TH , BIM1330TH","offers":[{"title":"Default Title","offer_id":10763692015652,"sku":"S3410","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/EZgOGVxEUjwoWixdfDJpjc9fmWJHu06t-24.jpg?v=1569381041"},{"product_id":"sp2-spirit-level-fixed-for-30mm-tube-mounts-by-bisley","title":"Bisley SP2 Fixed Spirit Level for 30mm Scope Mounts","description":"The Bisley SP2 is a fixed anti-cant spirit level built to fit 30mm scope mounts made by Sportsmatch. It replaces the rear ring screws on a compatible Sportsmatch mount, so once fitted it sits neatly in your eyeline without adding bulk or needing separate clamps. At just 16g, the level lets you check your rifle is holding true and level before you settle into the shot, which matters more the further out you're shooting: even a small amount of cant on the rifle throws the bullet off to one side, and that error grows with range. For anyone stalking or shooting at distance, having a quick visual check built into the mount setup takes the guesswork out of holding the rifle dead level, particularly in low light or awkward field positions where it's easy to misjudge by eye alone. It's a simple, purpose-built accessory rather than a general-purpose gadget, and it only fits 30mm Sportsmatch mounts, so check your mount before ordering.","brand":", Export_Restrict: True , Export_Block , LS-RM Default , BIMSFA , BIM30SF","offers":[{"title":"Default Title","offer_id":10763704008740,"sku":"S3673","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/Qx6bOFkm7vq3zLvsodIR7Zn8jY4lv8V7-24.jpg?v=1569381042"},{"product_id":"hto8c-mounts-two-piece-13mm-dovetail-high-25mm-tube","title":"Bisley HTO8C 1\"\/25mm High Mounts, 13mm Dovetail","description":"\u003cp\u003eBisley's HTO8C is a two-piece high scope mount built for the 13mm dovetail rail found on most modern BSA air rifles and early Weihrauch HW35 models. Made for 1\"\/25mm scope tubes, the high profile gives clearance for objective lenses up to 56mm, so larger, higher-magnification scopes sit clear of the barrel and cocking mechanism without needing raiser rails. Each mount uses a double-screw clamp to lock securely onto the dovetail, and a removable arrestor pin is included to key into the rifle's recoil stop where fitted, keeping the mount from creeping under recoil. Sold as a genuine Bisley\/Sportsmatch part through BushWear, this is straightforward, well-made mounting hardware rather than a budget stopgap — the kind of solid, no-nonsense fitting most air rifle shooters want when setting a scope up properly for pest control or plinking. Check your rifle's dovetail width and scope tube diameter before ordering, and get in touch with BushWear if you're unsure on fitment.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM13TH","offers":[{"title":"Default Title","offer_id":10763717804068,"sku":"992757","price":39.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/Idf0bffJa66nGFZdl3PREDIk6tq4nlon-24.jpg?v=1569381042"},{"product_id":"rb5-weaver-picatinny-adapters-pair-converts-9-5-15mm","title":"Sportsmatch RB5 Dovetail to Weaver\/Picatinny Adaptors","description":"\u003cp\u003eThe Sportsmatch RB5 is a pair of dovetail-to-Weaver\/Picatinny adaptor rails, converting a 9.5-15mm rimfire or air rifle dovetail to a standard Weaver\/Picatinny interface. They're designed for shooters who want to run night sights, rangefinding scopes or other Picatinny-pattern optics alongside a day scope, without committing to a permanent rail change: each adaptor is quick and easy to remove, so you can swap between your daytime setup and specialist optics as conditions demand. A removable arrestor pin locks the adaptor against recoil for a secure, repeatable fit. Made in Great Britain from high tensile aircraft-specification materials, the RB5 is built to the same standard used by target shooters and professional pest controllers, and comes with a lifetime warranty. Supplied by BushWear as a genuine Sportsmatch pair, this is a straightforward way to open up Weaver\/Picatinny compatible accessories on a dovetail-mounted rimfire or air rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMAP , BIMAP","offers":[{"title":"Default Title","offer_id":10764083953700,"sku":"S3418","price":78.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ye7FURSIKTQwcUi1xG16co12glY8scnU-24.jpg?v=1569381066"},{"product_id":"to48c-mounts-two-piece-15mm-dovetail-tikka-brno-medium-25mm","title":"Bisley TO48C Two-Piece Scope Mounts 15mm Dovetail Tikka","description":"\u003cp\u003eThe Bisley TO48C is a two-piece, double-screw scope mount built for rifles with a 15mm dovetail rail, most notably Tikka actions and the early Brno Model 2 .22 LR bolt-action. Manufactured by Sportsmatch, it is supplied in a medium ring height with a 25mm (1 inch) tube diameter, taking scopes with an objective lens up to 45mm without the bell touching the barrel or rail. A removable steel arrestor pin locates in the rail to stop the mount creeping under recoil, then lifts out cleanly if not needed. Base-to-rail height is 17mm, giving a solid, low-profile fit for classic sporting rifles. Made from robust steel construction, these mounts are a straightforward, no-nonsense way to get a 1 inch scope securely bedded on a Tikka or compatible dovetail action, whether for stalking, vermin control or target work. A practical, well-proven choice for anyone re-scoping an older Tikka or Brno rimfire.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMTT , BIMTT","offers":[{"title":"Default Title","offer_id":10764084936740,"sku":"S3426","price":53.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/VoYBSW6GNE5J8zMAQG58avLypw2xizQG-24.jpg?v=1569381066"},{"product_id":"to1c-economy-mounts-two-piece-dovetail-medium-25mm-tube","title":"Bisley TO1C Two-Piece Dovetail Scope Mounts, Medium","description":"\u003cp\u003eThe Bisley TO1C is a two-piece dovetail scope mount designed for 1\" (25mm) tube rifle scopes, giving medium clearance for lenses up to 45mm in diameter. Each ring fits an 11mm dovetail rail and is secured with a single top screw; there's no stop pin, so the rings can be positioned to suit your scope's eye relief before final tightening. Made in Great Britain from high-tensile, aircraft-specification material, these are Bisley's economy-grade mounts — solid, no-frills hardware built to hold zero rather than dress up a rifle. They're a straightforward option for stalkers and shooters fitting a new scope to a rifle with a standard dovetail rail, where a simple, dependable two-piece mount is all that's needed. As with any scope mount, check your rifle's dovetail width and your scope's objective lens diameter before ordering to be sure of a proper fit, and get in touch with BushWear if you need help confirming compatibility.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMET , BIMET","offers":[{"title":"Default Title","offer_id":10764085264420,"sku":"S3421","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/O3GANLQo8vhwVtmCeEPIKfxssbE6CQRJ-24.jpg?v=1569381066"},{"product_id":"hst46c-mounts-two-piece-see-through-dovetail-25mm-tube","title":"Bisley HST46C See-Through Scope Mounts 25mm Dovetail","description":"\u003cp\u003eThe Bisley HST46C is a two-piece see-through scope mount for 25mm (1 inch) tube scopes, built for 9.5-11.5mm dovetail rails. Each mount uses a four-bolt top ring and two-bolt base, with a removable stop pin for secure, repeatable fitting. The see-through design raises the scope clear of the rail so you can still use your rifle's open sights underneath, giving a useful backup if the scope is knocked or fails in the field. Rated for scopes up to 40mm objective lens diameter, the mounts are machined from high tensile aircraft-specification aluminium alloy and finished in matte black to match most sporting rifles. An Allen key is supplied for fitting both rings and base to the rail and scope tube. Popular with air rifle and rimfire shooters who want the flexibility of scope and iron sights on the same setup, these mounts are a straightforward, well-made option from a long-established British scope mount maker. Check your rail width and scope tube diameter before ordering to confirm fit.\u003c\/p\u003e","brand":", ShippingGroup: SML , Export_Block , LS-RM Default , BIMTS , BIMTS","offers":[{"title":"Default Title","offer_id":10764089884708,"sku":"S3425","price":43.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/LPsxZ655YHdTSkHO0meJ1XJEVH7OQRFF-24.jpg?v=1569381066"},{"product_id":"to4c-mounts-two-piece-dovetail-medium-25mm-tube","title":"Sportsmatch TO4C Two-Piece Medium Dovetail Scope Mounts","description":"\u003cp\u003eThe Sportsmatch TO4C is a two-piece scope mount built for 1in (25mm) tube scopes on 11mm (3\/8in) dovetail rails, the standard fitting found on most air rifles and rimfire rifles. Machined in Great Britain to Sportsmatch's usual close tolerances, each ring is secured with double screws per side for a firm, positive grip on the scope tube, while the two-bolt base clamps securely to the rifle's dovetail. A removable arrestor pin locates into the dovetail groove to stop the mount creeping under recoil, and can be taken out where the rifle's dovetail doesn't need it. Medium height suits scopes with an objective lens up to 45mm in diameter on most rifles, giving good clearance over the barrel without sitting unnecessarily high. Supplied as a matched pair (front and rear ring\/base), the TO4C is a straightforward, no-nonsense way to get a scope mounted solidly and squarely, and is backed by Sportsmatch's own manufacturing quality assurance.\u003c\/p\u003e","brand":", Export_Restrict: True , Export_Block , LS-RM Default , BIMTA , BIMTM","offers":[{"title":"Default Title","offer_id":10764139233316,"sku":"S3227","price":41.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/QtjKtYct0ErRZPqQsAAoTskQGwxWd0g3-24_d9581c02-2b5d-433f-9560-84ef38bad181.jpg?v=1569381075"},{"product_id":"atp72-mounts-two-piece-adjustable-weaver-high-30mm","title":"Bisley ATP72 Two Piece Adjustable High Weaver Mounts 30mm","description":"\u003cp\u003eThe Bisley ATP72 is a two-piece high scope mount for 30mm scope tubes, built to fit Weaver and Picatinny rails. Unlike a fixed mount, the ATP72 offers elevation adjustment of up to 50 MOA via an adjuster screw on each ring, giving you the range to zero a scope where a standard mount would run out of travel — useful when correcting for a barrel that sits proud of the rail or when running a scope with limited internal adjustment. The rings are of high tensile construction with a solid, double-clamp design, and the fasteners carry a special anti-vibration coating to help the mount hold zero under recoil. The high ring height suits larger-objective scopes, keeping the bell clear of the barrel and action. A sound, adjustable option for stalkers and shooters fitting a 30mm-tubed scope to a Weaver or Picatinny-railed rifle who need extra elevation range at the mount rather than relying on the scope's own turrets.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMW30THA , BIMW30THA","offers":[{"title":"Default Title","offer_id":10764147556388,"sku":"S3429","price":214.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/LjNNwf3M5nafOw6HsXP9e7rjmdMl7Dqd-24.jpg?v=1569381076"},{"product_id":"hto67c-mounts-two-piece-weaver-high-30mm-tube","title":"Sportsmatch HTO67C Two-Piece Weaver High 30mm Mounts","description":"\u003cp\u003eThe Sportsmatch HTO67C is a two-piece scope mount for 30mm tube scopes, built to fit Weaver and Picatinny rails 20mm wide. Each ring uses a double-clamp design with four Allen-head cap bolts and a thumb-nut base, giving a secure, even hold on the scope tube without the need for a torque wrench on the rifle side. A square-section, high-tensile steel arrestor bolt locates into the rail to stop any movement under recoil, and the high profile clears objective lenses up to 56mm in diameter on most rifles, useful where a large front lens would otherwise foul the barrel. Both rings measure 21mm across (dimensions A and B), and the pair weighs 124g. Like the rest of the Sportsmatch range, the HTO67C is made in England and covered by Sportsmatch's lifetime no-quibble guarantee. A straightforward, robust option for stalkers and target shooters fitting a 30mm scope to a Weaver or Picatinny-railed rifle who need the extra height for a large objective lens.\u003c\/p\u003e","brand":", Express_Shipping , Export_Block , LS-RM Default , BIMW30TH , BIMW30TH","offers":[{"title":"Default Title","offer_id":10764148506660,"sku":"S3428","price":161.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/9Mso7ANKI7TFIOwkOluoXjeU9C4XCnnI-24.jpg?v=1569381076"},{"product_id":"tm3-bisley-torch-mount-for-1in-scopes-by-sportsmatch","title":"Sportsmatch TM3 Torch Mount for 1in Scopes","description":"\u003cp\u003eThe Sportsmatch TM3 is a quick-release torch mount built for lamping and night-time pest control on rifles fitted with a 1in (25.4mm) scope tube. It clamps directly to the scope tube, or, on rifles already using a Sportsmatch mount, it can replace the top cap for an even more solid fixing. Either way the torch sits securely in place during use but detaches in seconds when it is time to case the rifle, so there is no need to strip the lamp off and reset it every trip. Machined to Sportsmatch's usual standard, it is a compact, no-nonsense accessory rather than a full lamping kit, designed to hold a torch steady on aim without adding unnecessary bulk to the setup. For stalkers and vermin controllers who lamp regularly, it is a straightforward way to keep a torch quickly detachable and consistently zeroed to the same point relative to the scope, trip after trip.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMTOA , BIMTOA","offers":[{"title":"Default Title","offer_id":10764152930340,"sku":"S3676","price":81.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/sDvu8hstm7ZPk9zNmkpAENChrrRiLjqF-24_339d102a-a5c2-4967-b768-33938589d1cf.jpg?v=1569381076"},{"product_id":"op15c-mounts-one-piece-angled-dovetail-medium-25mm-tube","title":"Bisley OP15C One-Piece Angled Dovetail Mount 25mm","description":"\u003cp\u003eThe Bisley OP15C is a one-piece scope mount with an angled, inclined base, machined with 0.75mm of vertical taper built into the body. That taper angles the scope forward, compensating for barrel droop or bringing elevation adjustment back within range on rifles where the scope's own adjustment isn't enough to reach zero. It is a medium-height mount sized for 25mm (1 inch) scope tubes, and clamps to a dovetail rail for a solid, single-piece fit rather than the two-ring arrangement of separate mounts. The mount will take scopes with an objective lens up to 45mm without fouling the barrel. As a one-piece design, it returns to zero reliably once fitted, with no risk of the two rings coming out of alignment with each other. A straightforward, no-fuss way to correct droop or gain elevation on a dovetail-railed rifle without resorting to shims or a new base. A sound choice for stalkers and shooters needing a dependable zero on rifles with known droop issues.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIMOAA , BIMODM","offers":[{"title":"Default Title","offer_id":10764154437668,"sku":"S3670","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/BcF8v6XFSEKckFE5wiSDT668U4N1YFi7-24_bc3ef3c6-9085-418c-b8fe-1f4e4a6ab344.jpg?v=1569381076"},{"product_id":"hto74-mounts-two-piece-15mm-dovetail-cz527-fox-high-30mm-tub","title":"Bisley HTO74 2-Piece 15mm Dovetail Mounts, 30mm High","description":"\u003cp\u003eThe Bisley HTO74 is a two-piece 30mm scope mount built for rifles with a 15mm dovetail, most notably the CZ 527, Brno Fox and Brno Model 1\/2. Made by Sportsmatch in the UK, it's a high-profile mount (giving clearance for scopes with objective lenses up to around 56mm) using the firm's reversible dovetail clamp design, so each ring can be swapped end-for-end for different eye relief. A removable arrestor pin is included to locate against the rear of the dovetail and stop the mount creeping under recoil, particularly useful on harder-kicking centrefire calibres. Every mount is CNC-machined and hand-checked before assembly, so the fit onto both rifle and scope tube is precise and consistent from ring to ring. At 125g it adds negligible weight to the rifle. This is a straightforward, no-nonsense way to get a 30mm scope onto a CZ 527 or similar 15mm-dovetail rifle without needing a separate rail or base, and it's the mount BushWear stocks for exactly that job.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM30TCZ15 , BIM30TCZ15","offers":[{"title":"Default Title","offer_id":10764190908452,"sku":"S3413","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/oI8P1nlhLJNl2DAuc8zXTq1rD9hVX5d2-24.jpg?v=1569381081"},{"product_id":"hto75-mounts-two-piece-17mm-dovetail-cz550-p-hale-high-30mm","title":"Bisley HTO75 Two-Piece High 30mm Scope Mounts CZ550","description":"\u003cp\u003eThe Bisley HTO75 is a two-piece scope mount set built for rifles with a 17mm dovetail, including the CZ550, CZ557 and other earlier CZ models, plus compatible Parker Hale and BSA bases. Machined in Great Britain from high tensile aircraft-grade material, the mounts hold a 30mm scope tube in a high setting, giving enough clearance for objective lenses up to 56mm without fouling the barrel or action. The two-piece design clamps directly onto the rifle's dovetail rail, giving a solid, repeatable mechanical fit between rifle and scope so zero holds under recoil. This is straightforward, no-nonsense mounting hardware rather than a showpiece — exactly what's needed to get a scope securely and correctly aligned on a CZ or Parker Hale-pattern action. Worth checking your rifle's dovetail width and desired scope tube height before ordering, as Bisley\/Sportsmatch mounts are sold in specific height and diameter combinations to suit different scope and rifle setups.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default , BIM30TCZ17","offers":[{"title":"Default Title","offer_id":10764194185252,"sku":"S1185","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/ZN2ogjYXG0FoRR4JnVnOCl8ulXF8zyE6-24.jpg?v=1569381081"},{"product_id":"atp90-mounts-two-piece-fully-adjustable-weaver-30mm-tube","title":"Bisley ATP90 Two-Piece Adjustable 30mm Scope Mounts","description":"\u003cp\u003eThe Bisley ATP90 is a two-piece scope mount for 30mm tube scopes, built to fit Weaver and Picatinny rails and suited to scopes with an objective lens up to 56mm on most rifles. Unlike a fixed set of rings, the ATP90 is fully adjustable for windage, elevation and height, with lateral positioning also adjustable so the scope can be centred perfectly over the bore. This makes it a practical option when a rifle's action or rail geometry needs a bit of extra correction to get the scope tracking true, or when mounting a large-objective scope that needs additional height. A square-section hardened steel arrestor bolt keeps the mount locked against recoil, while the locking screws carry an anti-vibration coating to help hold zero through repeated shots. Manufactured by Sportsmatch, a British scope mount maker established in 1972 with decades of experience supplying stalkers and target shooters, the ATP90 is finished for durability and comes with a lifetime guarantee. A sound choice for deer stalkers and rifle shooters who need a dependable, adjustable mounting solution on Weaver or Picatinny-equipped rifles.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10764238356516,"sku":"S20610","price":260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/7ggtWqUkSOuaUxZQlTUPuQJKxEGZv76J-24.jpg?v=1569381082"},{"product_id":"to88-mounts-two-piece-weaver-medium-34mm-tube","title":"Bisley Sportsmatch TO88 Two-Piece Weaver Mounts 34mm","description":"\u003cp\u003eThe Bisley Sportsmatch TO88 is a two-piece scope mount built for rifles with a Weaver or Picatinny rail, sized for 34mm scope tubes at medium height. Two-piece mounts like this are the practical choice on bolt-action centrefires and other rifles where a one-piece mount would obscure the bolt or breech, while still giving a totally solid, unmoving link between rifle and scope. At medium height the TO88 clears objective lenses up to 50mm on most rifles, covering the great majority of stalking and target scopes with a 34mm tube. Each mount clamps directly to the rail and includes a square-section, high-tensile steel arrestor bolt to lock the rings against recoil, so zero holds shot after shot. Like the rest of the range, Sportsmatch mounts are made in Great Britain and carry the maker's lifetime guarantee, making the TO88 a dependable, no-nonsense way to get a 34mm scope onto a Weaver\/Picatinny-railed rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10764239110180,"sku":"S18187","price":141.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/MQ1VxofCHNl6hlcfgVa6ZpZbGxHvjRUP-24.jpg?v=1569381082"},{"product_id":"to84-mounts-two-piece-15mm-dovetail-tikka-brno-medium-30mm","title":"Bisley TO84 Mounts, 30mm, Tikka\/Brno Dovetail","description":"\u003cp\u003eThe Bisley TO84 is a two-piece scope mount with a 30mm body tube in medium height, built to fit the 15mm dovetail rail on Tikka rifles, including the T3 and T3x, along with the older M55, M65, M590, M595, M695 and M695 Magnum models, and it also fits Brno actions using the same dovetail. It comes with an arrestor pin fitted specifically for Tikka rifles, locking the mount solidly onto the dovetail so it can't creep under recoil and knock the scope off zero. As a two-piece mount, it's simple to fit and remove without disturbing the action or bedding, and the solid 30mm rings give a secure, repeatable hold for a hunting or varminting scope. Built to the standard expected of a proper stalking rifle rather than a generic universal mount, it drops straight onto Tikka and compatible Brno actions without packing or modification. A dependable, correctly sized mount for anyone running a 30mm scope on a Tikka or Brno rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10764268240932,"sku":"S16445","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/2s04YcYv39eJYdX0y5U6gCuBupodNj7z-24.jpg?v=1569381085"},{"product_id":"dovetail-mount","title":"Pulsar Dovetail Mount for Night Vision \u0026 Thermal Riflescopes","description":"\u003cp\u003eThe Pulsar Dovetail Mount is a dedicated rifle mount for attaching Pulsar night vision and thermal riflescopes — including the Trail, Apex, and Digisight series — to rifles and air rifles fitted with a 9–11 mm dovetail rail. The dovetail rail is among the most common rail standards on traditional sporting and rimfire rifles as well as many air rifles, making this mount a practical choice for hunters and pest controllers running a Pulsar thermal or night vision scope on a pre-existing platform. The mount clamps to the dovetail rail and interfaces with the mounting prism built into compatible Pulsar scope bases. Multiple fixing positions in the scope base let you fine-tune the mounting position before locking the optic down. The mount dimensions are 172 × 29 × 21 mm, and installation requires no permanent modification to the host rifle.\u003c\/p\u003e","brand":", Export_Block , LS-RM Default","offers":[{"title":"Default Title","offer_id":10779107721252,"sku":"S21859","price":52.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0071\/8906\/9860\/products\/qkVMSO7DveV0fvFGpHguYsq9OZ5VpPOU-24.jpg?v=1569382481"}],"url":"https:\/\/www.bushwear.co.uk\/collections\/scope-mounting.oembed?page=22","provider":"BushWear","version":"1.0","type":"link"}