Bag Accessories

_ thermoformed, semi-hard case
_ internally padded to protect cameras, etc.
_ laminated with Cordura® fabric for durability
_ back is MOLLE webbing/belt+snap system
_ use as organizer cases inside bigger bags
_ use as small belt cases on webbing+snaps
_ use woven onto the exterior of our packs/bags
_ use by clipping one/two d-rings w/ carabiners
_ ultra light-weight (especially important in multiples)

By adding the HatchTM you can carry your vulnerable camera and similarly sized devices into harsh environments with confidence on any modular-webbing vest, bag, etc.

Features:

• Thermoformed, semi-hard case
• Internally padded to protect cameras etc.
• Laminated with Cordura® fabric for durability
• Mollé webbing on rear
• Use as organiser cases inside bigger bags
• Use as small belt cases on webbing + snaps
• Attaches on to Hazard 4’s packs/bags exteriors
• Use by clipping one/two D-rings with carabiners
• Ultra light-weight (especially important in multiples)

• Soft, quilted, laptop/armour pocket(16"/17")
• Inside Velcro for holsters, patches etc.
• Locking military spec buckles to discourage pickpockets
• Internal side-wall pockets for magazines, bottles, etc.
• 3D rubber, subdued Velcro patch logo
• Full organiser for pens, knives, lights, S.D cards, etc.
• Clear document window in flap underside
• Main bay loops for option to clip in divider panel

A true messenger, this bag stays flat when carrying loads like a laptop, but clever construction allows it to square-out and accept bulky boxes, etc. The similarities to its conventional rivals end there; its tactical and professional features make it a real work-bag.

Features:

• Soft, quilted, laptop/armour pocket(16"/17")
• Inside Velcro for holsters, patches etc.
• Locking military spec buckles to discourage pickpockets
• Internal side-wall pockets for magazines, bottles, etc.
• 3D rubber, subdued Velcro patch logo
• Full organiser for pens, knives, lights, S.D cards, etc.
• Clear document window in flap underside
• Main bay loops for option to clip in divider panel

Dimensions:

External Size: 535.94 x 340.36 x 93.98mm

Main Compartment: 513.08 x 340.36 x 53.34mm

Laptop Compartment: 386.08 x 287.02 x 50.8mm

Total Gear Capacity: N/A

Product Weight: N/A 

• Double layered fabric pads contents well
• Double side elastics for storing extra batteries etc.
• Comes with a d-ring for hanging on lanyard etc.
• Fits horizontally onto most narrower dress belts

A small MOLLE/PALS compatible sheath that fits on any gauge belt with its back webbing/snap system. It is perfectly sized with elastic sides to fit the majority of popular flash-lights, folding knives, multi-tools, pistol magazines and chemical sprays. The long Velcro area allows for length adjustability.

Features:

• Double layered fabric pads contents well
• Double side elastics for storing extra batteries etc.
• Comes with a d-ring for hanging on lanyard etc.
• Fits horizontally onto most narrower dress belts

• Exclusive patch-style quick reference card collection
• Sized to fit into molle loops and anchors w/ a hook-handle
• Fits into most admin panel/pocket slots in our bags
• Lanyard holes (one preloaded w/ aluminum carabiner)
• Can be wrapped around wrist, rifles, etc. w/ cords
• Creates lash-point on any molle (clip binder in lower hole)
• Multiple cards can be clipped into collection "fans"
• Rugged for survival
• Textured handles marked with a number for fast reference

The Cheatstick is the exclusive patch-style quick reference card collection. Various models include items like rulers, conversions, etc. The Cheatstick is sized to fit into MOLLE loops and anchors with a hook-handle. The Cheatstick™ will also fit into most admin panel/pocket slots in our bags.

Features:

• Exclusive patch-style quick reference card collection
• Sized to fit into molle loops and anchors w/ a hook-handle
• Fits into most admin panel/pocket slots in our bags
• Lanyard holes (one preloaded w/ aluminum carabiner)
• Can be wrapped around wrist, rifles, etc. w/ cords
• Creates lash-point on any molle (clip binder in lower hole)
• Multiple cards can be clipped into collection "fans"
• Rugged for survival
• Textured handles marked with a number for fast reference

• Soft, quilted, laptop/armour pocket (16"/17")
• Inside Velcro for holsters, patches etc.
• Locking military spec buckles to discourage pickpockets
• Internal side-wall pockets for magazines, bottles, etc.
• 3D rubber, subdued Velcro patch logo
• Full organiser for pens, knives, lights, S.D cards, etc.
• Clear document window in flap underside
• Main bay loops for option to clip in divider panel

The feature set on this bag is almost identical to the Defense Courier Bag. The distinction comes in the air-mesh backed strap, with a modular MOLLE front so it can be worn more like a pack. This makes it very comfortable for long excursions with heavy loads and it can still be rotated to a side-bag or chest pack orientation for quick access to gear. It can also be outfitted with a stabiliser strap, and the main opening is modified to help retain contents in a sideways orientation.

Features:

• Soft, quilted, laptop/armour pocket (16"/17")
• Inside Velcro for holsters, patches etc.
• Locking military spec buckles to discourage pickpockets
• Internal side-wall pockets for magazines, bottles, etc.
• 3D rubber, subdued Velcro patch logo
• Full organiser for pens, knives, lights, S.D cards, etc.
• Clear document window in flap underside
• Main bay loops for option to clip in divider panel

• Double layered fabric pads the contents well
• Double side elastics for storing extra batteries etc.
• Comes with a d-ring for hanging on lanyard etc.
• Fits horizontally onto most narrower dress belts

A small MOLLE/PALS compatible case that that also fits on any gauge belt with its back webbing.

Features:

• Double layered fabric pads the contents well
• Double side elastics for storing extra batteries etc.
• Comes with a d-ring for hanging on lanyard etc.
• Fits horizontally onto most narrower dress belts

_ provides functionality from adding loops, valves, wire passages, and lights, to mounting
   extra pouches and utility panels.
_ can be used to create bungee/paracord retention zig-zags, clipping off ice axes, or
   attaching carabiners, etc.
_ SG (Stop Gap) are soft rubbery internal loops that won't hurt the user (or the items
   inside their bag).
_ the inner and outer pieces can be swapped inside or outside a bag. For use with
HardPoint™ nuts and screws (sold separately).

The Hardpoint™ Series includes a selection of accessories, which screw into double grommets and provide functionality from adding loops, valves, wire passages and lights. Plus, you are able to mount extra pouches and utility panels.

A new innovative concept, these accessories work on any of the Hazard 4 hard shells and soft bag grommets, as well as molle and webbing. The Hardware Kit also uses rubber Polymer backers inside the bag, which also have plugs to cover screws and nuts. This is a patent pending device set unique to Hazard 4.

Features:

• x2 Stop Gap™-1
• Available in black, coyote, OD green and orange

• can accommodate packs up to 120ltrs.
• With its elasticated draw string, the cover can be pulled in tight around the rucksack to avoid water accessing any areas.

- Cordura Fabric with padding
- Quilted interior
- Back surface features MOLLE
- Velcro area for further attachments
- Velcro closures
- Removable shok cord elastic
- 2 grommeted/filtered air vents
- Mil-spec steel corner triangle ring

Fits iPad® with thin cover-case. Featuring Cordura® fabric with generous padding. Has a quilted interior to protect goods in transit. The back surface is MOLLE covered to store items such as cameras, charging bricks and smaller pouches for the photo kit reader, USB cables, flash drives, and mil-spec items such a folding knives, multi-tools, water bottle pouches, etc. The back also has a Velcro area for further attachments. This product has high quality recessed Velcro closures and unique security-closure on front with removable shock cord elastic. For ventilation of the iPad, there are two grommeted/filtered air-vents. There is also facility to clip a karabiner, keychain or wrist loop on the mil-spec steel corner triangle ring. This one is a real original.

Features:

- Cordura Fabric with padding

- Quilted interior

- Back surface features MOLLE

- Velcro area for further attachments

- Velcro closures

- Removable shok cord elastic

- 2 grommeted/filtered air vents

- Mil-spec steel corner triangle ring 

3D polymer/ velcro backed morale patch. Available in 3 colours.

3D polymer/ velcro backed morale patch. Available in 3 colours.

• Includes one rifle loop piece
• Can be used as a replacement or additional rifle loop for Hazard 4 bags.

This Velcro loop secures your rifle to the interior of Hazard 4 Bags.

Available in Coyote and is compatible with the Battle Axe ™, Smuggler ™ and Longshot ™.

• Soft rubber external loops
• Light Duty
• Available in black, coyote, OD green and orange
• Inner and outer pieces can be swapped inside or outside of a bag

The Hardpoint™ Series includes a selection of accessories, which screw into double grommets and provide functionality from adding loops, valves, wire passages and lights. Plus, you are able to mount extra pouches and utility panels.

A new innovative concept, these accessories work on any of the Hazard 4 hard shells and soft bag grommets, as well as molle and webbing. These soft rubbery external loops are light duty loops and come in a range of colours that match the wilderness to safety. The inner and outer pieces can be swapped inside or outside of a bag.

Part of the system, includes the screws, nuts and covers. All that’s required is a single screw driver. This is a patent pending device set unique to Hazard 4.

Features:

• Soft rubber external loops
• Light Duty
• Available in black, coyote, OD green and orange
• Inner and outer pieces can be swapped inside or outside of a bag

•  Rotates from user’s back to chest for fast gear access
• Padded back-carrier pocket  ts most 15.6” laptops
• Back-pocket will also fit hydration bladders (<100 Oz./3L)
• Optimised for right-hand-users but works for both
• Anatomic, thermoformed back-panel with air circulation
• 3D air-mesh underside on straps/belt for breathability
• Hydration hose/antenna port to main and back areas

This unique professional pack has padded, ventilated shoulder straps which are ergonomically cut for hours of comfortable wear per day. It is covered in modular (Mollé compatible) webbing to attach pouches for phones, etc. Generous side modular webbing provides expansion options and the thermoformed moulded back panel provides variable rigidity, air ventilation, and a durable surface. A drop-down fast access gear organiser can also hold an iPad sized tablet like a shelf and the main compartment is lined in Velcro for attaching dividers, patches or Hazard 4® holsters.

• Available in two colours; Black & Coyote
• Rotates from user’s back to chest for fast gear access
• Padded back-carrier pocket ts most 15.6” laptops
• Back-pocket will also fit hydration bladders (<100 Oz./3L)
• Optimised for right-hand-users but works for both
• Anatomic, thermoformed back-panel with air circulation
• 3D air-mesh underside on straps/belt for breathability
• Hydration hose/antenna port to main and back areas
• Full-width flip-down shelf with organiser to access on chest
• Flat zip-pocket on front with Velcro panel area above
• Large grab-handles for carrying or pulling to chest/back
• Internal mesh zip/elastic pockets for organising items
• High-quality 3D Hazard 4® logo in subdued colour scheme
• Wide, padded belt has Mollé webbing for pouches etc.
• Buckle on harness strap for rapid drops in emergencies
• Compression-straps (which also secure tubular items)
• Mollé web throughout (ie harness straps) for expansion
• Compatible with optional cartridge™ laptop insert Weapons Capacity
• Generous Mollé for attaching holsters/mag pouches
• Side flat-pockets for paddle holsters/rifle magazines
• Hydration pocket also has Velcro panel for attaching covertly Hazard 4’s optional modular pistol/magazine holster Colour Options

_ internally padded to protect cameras, etc.
_ laminated with Cordura® fabric for durability
_ use as organizer cases inside bigger bags
_ use as small shoulder bag w/ the d-ring+strap
_ ultra light-weight (especially important in multiples)

Similar to the HatchTM but this edition adds a thermoformed semi-hard case on both sides and comes with a removable nylon strap.

Features:

• Thermoformed, semi-hard case
• Internally padded to protect cameras etc.
• Laminated with Cordura® fabric for durability
• Use as organiser cases inside bigger bags
• Use as small shoulder bag w/ the D-ring + strap
• Attaches on to Hazard 4’s packs/bags exteriors
• Ultra light-weight
• Comes with a removable nylon strap

• Allows use of non-ready MOLLE pouches
• Redundant-closures for peace of mind
• Not sensitive to MOLLE webbing thickness
• Extremely durable, soft construction
• Stiffened section for minimum float

Attaching pouches onto a modular MOLLE system bag has always been frustrating. Many manufacturers' pouches don't come with integrated straps on the back so the solution has always been to use plastic hardware. The hardware always seems to break and be hard to attach. Hazard 4's solution is simple, economical, light and never cracks.

• Molded-in bungee hook receiver
• Water resistant O-ring seals
• Heavy duty latches and double padlock tabs

• Available in two colours; Black & Coyote
• Rotates around the large padded strap from lumbar area to chest
• Mollé webbing on main strap for pouches, etc.
• Padded rear area for fast access to tablets, netbooks, etc.
• Thermoformed back padding for ventilation and durability
• Two large side-pockets  FIt up to 1L water bottle
• Large front pocket with organiser for pens, knives, small tools, etc.
• Front Velcro patch area with Mollé Coverage
• Large top/bottom grab-handles
• Bottom compression strap
• Velcro compatible inside edges for attaching holsters/patches, etc.
• Adjustable stabiliser strap to securely hold bag to body

The smallest of the Evac™ sling series; it is designed to sit at the lumbar area of the back, promoting a low centre of gravity and to carry a smaller volume than its larger brothers. But its wider width compared to the Plan-B™, Rocket™ and Takedown™ allows it to carry wider loads like iPads and netbook laptops.

Features:

• Available in two colours; Black & Coyote

• Rotates around the large padded strap from lumbar area to chest

• Mollé webbing on main strap for pouches, etc.

• Padded rear area for fast access to tablets, netbooks, etc.

• Thermoformed back padding for ventilation and durability

• Two large side-pockets FIt up to 1L water bottle

• Large front pocket with organiser for pens, knives, small tools, etc.

• Front Velcro patch area with Mollé Coverage

• Large top/bottom grab-handles

• Bottom compression strap

• Velcro compatible inside edges for attaching holsters/patches, etc.

• Adjustable stabiliser strap to securely hold bag to body

Dimensions:

External Size: 342.9 x 241.3 x 177.8mm

Main Compartment: 330.2 x 223.52 x 127mm

Laptop Compartment: 330.2 x 220.98 x 12.7mm

Total Gear Capacity: 19.2L (1,172.3 cubic inches)

Product Weight: 498.9g 

• Available in two colours; Black & Coyote
• Rotates from user’s back to chest for fast gear access
• Padded back-carrier pocket  ts most 15.6” laptops
• Back-pocket will also fit hydration bladders (<100 Oz./3L)
• Optimised for right-hand-users but works for both
• Anatomic, thermoformed back-panel with air circulation

This unique professional pack has padded, ventilated shoulder straps which are ergonomically cut for hours of comfortable wear per day. It is covered in modular (Mollé compatible) webbing to attach pouches for phones, etc. Generous side modular webbing provides expansion options and the thermoformed moulded back panel provides variable rigidity, air ventilation, and a durable surface. A drop-down fast access gear organiser can also hold an iPad sized tablet like a shelf and the main compartment is lined in Velcro for attaching dividers, patches or Hazard 4® holsters.

Features:

• Available in two colours; Black & Coyote
• Rotates from user’s back to chest for fast gear access
• Padded back-carrier pocket ts most 15.6” laptops
• Back-pocket will also fit hydration bladders (<100 Oz./3L)
• Optimised for right-hand-users but works for both
• Anatomic, thermoformed back-panel with air circulation
• 3D air-mesh underside on straps/belt for breathability
• Hydration hose/antenna port to main and back areas
• Full-width flip-down shelf with organiser to access on chest
• Flat zip-pocket on front with Velcro panel area above
• Large grab-handles for carrying or pulling to chest/back
• Internal mesh zip/elastic pockets for organising items
• High-quality 3D Hazard 4® logo in subdued colour scheme
• Wide, padded belt has Mollé webbing for pouches etc.
• Buckle on harness strap for rapid drops in emergencies
• Compression-straps (which also secure tubular items)
• Mollé web throughout (ie harness straps) for expansion
• Compatible with optional cartridge™ laptop insert Weapons Capacity
• Generous Mollé for attaching holsters/mag pouches
• Side flat-pockets for paddle holsters/rifle magazines
• Hydration pocket also has Velcro panel for attaching covertly Hazard 4’s optional modular pistol/magazine holster Colour Options

• Fits all backpacks 20-42 Litres
• Removable blaze Panel

• Allows use of non-ready MOLLE pouches
• Redundant-closures for peace of mind
• Not sensitive to MOLLE webbing thickness
• Extremely durable, soft construction
• Stiffened section for minimum float

Attaching pouches onto a modular MOLLE system bag has always been frustrating. Many manufacturers' pouches don't come with integrated straps on the back so the solution has always been to use plastic hardware. The hardware always seems to break and be hard to attach. Hazard 4's solution is simple, economical, light and never cracks.

- Made from Cordura
- Fits an IPad Mini with a thin cover
- Includes padding
- Quilted interior for protection
- Features Molle on back of the case with attachment straps for small pouches

This sleeve can fit an iPad® Mini w/ a thin cover. It is made of Condura® with generous padding without being bulky, it's quilted interior protects the contents. The back features ready to go Molle with attachment straps used to attach smaller pouches.

Features:

- Made from Cordura
- Fits an IPad Mini with a thin cover
- Includes padding
- Quilted interior for protection
- Features Molle on back of the case with attachment straps for small pouches

- Cordura Fabric with padding
- Quilted interior
- Back surface features MOLLE
- Velcro area for further attachments
- Velcro closures
- Removable shok cord elastic
- 2 grommeted/filtered air vents
- Mil-spec steel corner triangle ring

Fits iPad® with thin cover-case. Featuring Cordura® fabric with generous padding. Has a quilted interior to protect goods in transit. The back surface is MOLLE covered to store items such as cameras, charging bricks and smaller pouches for the photo kit reader, USB cables, flash drives, and mil-spec items such a folding knives, multi-tools, water bottle pouches, etc. The back also has a Velcro area for further attachments. This product has high quality recessed Velcro closures and unique security-closure on front with removable shock cord elastic. For ventilation of the iPad, there are two grommeted/filtered air-vents. There is also facility to clip a karabiner, keychain or wrist loop on the mil-spec steel corner triangle ring. This one is a real original.

Features:

- Cordura Fabric with padding

- Quilted interior

- Back surface features MOLLE

- Velcro area for further attachments

- Velcro closures

- Removable shok cord elastic

- 2 grommeted/filtered air vents

- Mil-spec steel corner triangle ring 

- Converts most strapless bags and pouches
- Can replacve exisiting bag straps
- Includes stabiliser strap

This strap set converts most strapless bags or pouches to a configuration more comfortable to wear such as a shoulder bag or chest pack. It can event replace existing bag straps. The 3D mesh is comfortable and breathable and the modular MOLLE system increases the carrying capability of your bag. The stabiliser strap keeps the bag from sliding down and the length is easily adjustable to fit most sizes.

• Parker-Hale patch logo
• Popper fastening
• Clear Perspex certificate pocket
• Gift boxed

Features Parker-Hale patch logo, popper fastening and clear Perspex certificate pocket. Gift boxed.