Reloading Products

Lee

Lee Case length gauge & shell holder

£6.99

Precise and economical
Trim to length and square the case mouth
Requires a Lee Cutter and Lock Stud to function

Works out the length of the trimming required on a case. Please note unless you already have one you will require a seperate cutter and lock stud for this to work code: 30401.5

Hornady

Hornady Modified Cases for OAL Gauge

£9.99 £7.99 Save £2.00

Cases are specially modified to work with Lock-N-Load Precision gauges.
A special fine thread is used to attach them to the gauges.
Ensures that cases emain perfectly square for precise alignment in the chamber of your firearm.

Modified Cases These cases are specially modified to work with Lock-N-Load Precision gauges. A special fine thread is used to attach them to the gauges, ensuring that they remain perfectly square for precise alignment in the chamber of your firearm. Second, the neck of the case is made perfectly round and opened slightly to allow a standard diameter bullet to slip into the case mouth effortlessly, but concentrically, to ensure the most precise results possible.

Hornady

Hornady One Shot Case Lube

£13.99

A high speed micro penetrating, high pressure dry film.
Offers advantages in critical match loads accuracy.
Eliminates the paste lubing mess.

Lube entire blocks of cases in one shot. Dries in minutes. One Shot is a non-petroleum product that will not contaminate powder or primers.

Features:
A high speed micro penetrating, high pressure dry film.
Offers advantages in critical match loads accuracy.
Eliminates the paste lubing mess.

One Shot Case Lube is the most popular reloading cartridge and tool lubricant in the market, because; Case Lube is a dry film Boundary lubricant that is non-hazardous, does not contaminate powders or primers, and the DynaGlide technology exceeds US Military & NATO load carrying capacity requirements by 6 times. Precision shooters appreciate One Shot Case Lubeâs clean, non-sticky, quick and easy application when loading large volumes of rounds at a time. The flexible all-purpose dry film lubricant use on their other reloading tools is a major bonus.

Jackson Rifles

Jackson Rifles Rifle (cap) Thread Protector 14x1 Black

£3.99

For use is using your rifle unmoderated or removing the moderator while in transit.
Will help protect your barrel thread.
A simple but extremely effective product.

If using your rifle unmoderated or removing the moderator while in transit protect your barrel thread with this simple but extremely effective product.

Jackson Rifles Rifle (cap) Thread Protector 14x1 Black

Hornady

Hornady Headspace Bushing

£19.99 £9.99 Save £10.00

Designed for use in the Lock-N-Load Headspace Gauge.
Bushings are machined to exacting tolerances to ensure reliable results every time you use them.
Four different sizes for a perfect fit with any firearm.

Designed for use in the Lock-N-Load Headspace Gauge, these bushings are machined to exacting tolerances to ensure reliable results every time you use them. The Lock-N-Load Headspace Gauge allows the reloader to precisely measure cases while sizing them for a perfect fit in any firearm.

Sizes:
A
.17REM, 204 Ruger, 222 REM, 222 REM MAG, 223 REM, 220 SWIFT, 221 FB

B
22PPC, 22/250 REM, 6PPS, 250 SAV, 7BR REM

C
6mm REM, 257 ROB, 25-06 REM, 270 WIN, 7x57mm, 280 REM, 30-30 WIN, 20-06 SPNFLD, 300H&H, 7.62x39 BRIT, 6,5x44 Mauser, 7mm WSM, 30-40 KRAG

D
243 WIN, 7mm/08, 308 WIN, 300 SAV, 223 WSSM, 243 WSSM, 260 REM, 270 WSM, 35 REM

E
264 WIN MAG, 284 WIN, 7MM REM MAG, 300 WIN MAG, 8mm REM MAG, 338 WIN MAG, 375 H&H, 7mm STW, 6.5x284, 7mm ULTRA MAG, 7mm SAUM, 300 WSM, 300 REM SAUM, 338 ULTRA MAG, 35 WHELAN, 350 REM, 300 ULTRA MAG

F
Bushing blank with .188" diameter hole. Drill and ream for sizes not listed above.

Hornady

Hornady LNL OAL Straight Gauge

£49.99 £46.99 Save £3.00

For all bolt action and single-shot firearms.
Can also be used with any firearm with straight-line access to the chamber.
Very precise and user friendly model.

For all bolt action and single-shot firearms, or any firearm with straight-line access to the chamber. This model is preferred, as it is most precise and user friendly.

Hornady

Hornady Comparator Insert Only

£9.99 £4.49 Save £5.50

Bullet Comparator Inserts are designed for use with the Hornaday Comparator.
It elminates variables when measuring the over-all length of a bullet.
Also provides the reloader with a more consistent way to monitor the overall length of reloads.

Bullet Comparator Inserts are designed for use with the Hornaday Comparator; it elminates variables when measuring the over-all length of a bullet. Bullet length can vary a few thousandths due to material variation and tip finish. The Hornaday Comparator Inserts allow the reloader to measure the bullet from the base to a specific point on the ogive, which has little variation, if any. This versatile system also provides the reloader with a much more consistent way to monitor the overall length of their reloads, allowing the reloader to build more precision into their handloads, that translates into better groups at the range and more meat in the freezer.

Hornady

Hornady Hornady Comparator Body Only B2000 (Calibre Insert Required)

£19.99 £16.99 Save £3.00

Hornady Comparator.
Body Only B2000.
Calibre insert required.

Hornady Comparator Body Only B2000 (Calibre Insert Required).

RCBS

RCBS Shell Holder

£14.99

Holds cases in all RCBS.
Can hold cases in other presses.
Fits RCBS hand priming tool.

Holds Cases in all RCBS and other presses. Fits RCBS hand priming tool.

RCBS Shell Holders Sizes

Holders	Number
6.5mm x 55 Swedish Mauser	2
243 Winchester	3
270 Winchester	3
30-06 Springfield	3
308 Winchester	3
222 Remington	10
223 Remington (5.56mm)	10

Provided as a general guide only. For more accurate sizing information per brand, please use the RCBS page here.

Hornady

Hornady Anvil Base for Comparator

£17.99

Can take accurate measurements of reloaded ammunition.
The anvil base quickly and easily attaches to any caliper in seconds.
Designed to be used the Hornady Lock-N-Load Bullet Comparator (Sold Separately).

The Hornady Lock-N-Load Bullet Comparator Anvil Base Kit is perfect for the reloader looking to take accurate measurements of reloaded ammunition. When used with the Hornady Lock-N-Load Bullet Comparator (Sold Separately) the anvil base allows you to measure uniformity of ammunition from the base of the loaded round to the ogive of the bullet. The anvil base quickly and easily attaches to any caliper in seconds.

Technical Information

Fits: Any set of calipers
Function: Designed to be used the Hornady Lock-N-Load Bullet Comparator (Sold Separately) as a way to measure consistency between loaded rounds of ammunition
Material: Aluminum and Brass
Notes: This base does not accept inserts and is used to help keep loaded rounds between the caliper when measuring with the Lock-N-Load Comparator (Sold Separately)

Hornady

Hornady .22 50gr V-Max No-Moly (100bx) Heads 22261

£30.00

100pk
The polymer tip increases the ballistic coefficient
Utilizing the proper base design provides incredible in-flight stability for long-range shooting

Polymer Tip:- The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact even at velocities as low as 1600 fps.

Higher Ballistic Coefficient:- Hornady combines the sharp, pointed polymer tip with the most aerodynamic profile for a high ballistic coefficient. The V-MAX profile also provides the maximum bearing surface for added in-flight stability.

Swaged Lead Core:- The swaging process allows for precise formation of the core up and around the tip, with a cavity under the tip's stem. This allows the tip to build up energy before smashing into the core, causing dramatic fragmentation of the core and jacket.

Precise Boattail & Flatbase Designs:- Utilizing the proper base design provides incredible in-flight stability for long-range shooting

Hornady .22 50gr V-Max No-Moly (100bx) Heads 22261

Lyman

Lyman 1200 Turbo Tumbler

£99.99

Built in "exciters" for better tumbling action and faster case cleaning.
Improved air flow.
1200 Classic runs smoother, quieter and better than ever before.

NEW LOWER PRICE! Features a completely redesigned base and drive system, beefed up suspension system and built in "exciters" for better tumbling action and faster case cleaning. Improved air flow. Combined with our new Anti-Rotation Pad Mounts, the 1200 Classic runs smoother, quieter and better than ever before.

Wheeler

Wheeler Wheeler Space Saver Screwdriver Set

£21.99

Includes a selection of the same high quality bits found in the Professional Gunsmithing Screwdriver Sets
Includes standard Phillips, hex and torx bits
1-2" long 2 Phillips but which is ideal for recoil pad installation
1 hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments
1 magnetic handle is made of comfortable overmolded plastic

Less than half the size of comparable gunsmithing screwdriver sets, the Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. Its also the perfect size to include on your trips to the range and the field. Included with the standard, Phillips, hex, and torx bits, is a 2 long 2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4 square drive sockets and other attachments. The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise.

Includes a selection of the same high quality bits found in the Professional Gunsmithing Screwdriver Sets
Includes standard Phillips, hex and torx bits
1-2" long 2 Phillips but which is ideal for recoil pad installation
1 hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments
1 magnetic handle is made of comfortable overmolded plastic

Wheeler Wheeler Space Saver Screwdriver Set

Lee

Lee Quick Change Bushing 2pk

£12.99

Pack of 2
Allows instant, accurate die changes
Eliminates die adjustments

The Quick Change Bushings make changing dies a snap and accomplishes the task in seconds. Once mounted on your die, youâll never have to adjust the die again unless you want to. It saves time, eliminates guesswork and ensures the consistency of your reloaded product. Per 2.

Lee

Lee Perfect Powder Measure

£25.99

Tapered drop tube
Micrometer adjuster
Integral powder baffle

Lee Precision has eliminated cut powder, jerky action and drum binding in the design of their Perfect Powder Measure. Micrometer adjuster reads directly in cubic centimeters. "O" ring positively locks the adjustment and removes end play. Throws charges from 2 grains to over 100 grains. Easy to change powders, just rotate the hopper 1/4 turn to shut off the powder flow and lift off the hopper. The Perfect Powder Measure also has an integral powder baffle and comes with a tapered drop tube that prevents powder bridging.

Technical Information:

Material: Nylon and Aluminum
Metering Chamber: Micrometer
Features: Elastomer Wiper
Attachment: To bench
Includes: Micrometer adjustable
Powder Charge Thrown: 2 to over 100 grains
Warranty: 2 Year Lee Guarantee

Hornady

Hornady .22 Heads (.224) 60gr V Max 22281 100pk

£31.00 £25.99 Save £5.01

100pk
The polymer tip increases the ballistic coefficient
Utilizing the proper base design provides incredible in-flight stability for long-range shooting

Polymer Tip:- The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact even at velocities as low as 1600 fps.

Higher Ballistic Coefficient:- Hornady combines the sharp, pointed polymer tip with the most aerodynamic profile for a high ballistic coefficient. The V-MAX profile also provides the maximum bearing surface for added in-flight stability.

Swaged Lead Core:- The swaging process allows for precise formation of the core up and around the tip, with a cavity under the tip's stem. This allows the tip to build up energy before smashing into the core, causing dramatic fragmentation of the core and jacket.

Precise Boattail & Flatbase Designs:- Utilizing the proper base design provides incredible in-flight stability for long-range shooting

Hornady .22 Heads (.224) 60gr V Max 22281 100pk

Hornady

Hornady Comparator Set (with six calibre inserts)

£44.99 £38.49 Save £6.50

Perfect for the reloader looking to quickly and precisely measure seating depth of loaded ammunition.
Comparator attaches to any caliper and measures cartridges from 17 to 45 caliber.
Slot on comparator body is cut off-center.

The Hornady Comparator is perfect for the reloader looking to quickly and precisely measure seating depth of loaded ammunition from the bullet ogive to the base of the loaded round, to eliminate variation in seating depth. The comparator attaches to any caliper and measures cartridges from 17 to 45 caliber.

Technical Information
Fits: Any set of calipers
Material: Aluminum and Brass
Kit Includes:
Comparator body
6 Comparator inserts for the following diameter bullets: 224, 243, 257, 277, 284 and 308. Allen wrench Notes: Slot on comparator body is cut off-center

Hornady Comparator Set (with six calibre inserts)

Lee

Lee Auto Prime Shell Holder

£4.49

For use with the Lee Auto Prime
Made from high quality steel

Shell holder for use with the Lee Auto Prime. This is an essential piece of reloading kit. It is required to work the Auto Prime Tool.

See Sizing Guide Tab for full calibre chart.

There was a problem
Your input contains more than the maximum of 50000 characters in a single cell.

Birchwood Casey

Birchwood Casey Case Cleaner Concentrate 16 ounce

£12.99

Easily removes resizing lubricant, oils, grime and stains from brass cartridge cases
Helps remove powder residue
Safe, non-fuming, non-etching solution that wonât weaken cases

Super concentrate – this one bottle makes over two gallons of reusable cleaning solution and will clean 8,000 medium sized cases. Easily removes resizing lubricant, oils, grime and stains from brass cartridge cases. Restores them to original finish for reliable operation. Helps remove powder residue. Brass Cartridge Case Cleaner is a safe, non-fuming, non-etching solution that won’t weaken cases. Reusable – store solution in a plastic or glass container (not metal) and use when needed.33845 - Brass Cartridge Case Cleaner, 16 fl.oz. Bottle

Birchwood Casey Case Cleaner Concentrate 16 ounce

Lee

Lee CASE TRIMMER (Cutter and Lock Stud)

£5.99

Trimming cases has never been easier
Can be turned by hand or with an electric drill
Uses correct SAMMI specifications

The Lee Case Trimmer and Cutter is designed to be used with only Lee Case Length Gages and Shellholders made from hardened steel, trimming cases to correct SAMMI specifications has never been easier. The shaft on the lock stud allows the setup to be turned by hand or with an electric drill.

Technical Information

Fits: Lee Case Length Gages and Shellholders
Function: Lock Stud holds the shellholder, Trimmer Cutter holds the Length gage
Material: Steel
Notes: Trim length cannot be adjusted as with bench-mounted case trimmers
Large Cutter and Lock Stud has 1/4" shaft for fitting in a drill and the regular Cutter and Lock Stud has a 3/8" shaft for fitting in a drill

Please note that for this part to work you will require to purchase the case length gauge for each seperate caliber you wish to trim. Product code 304052.

Lee

Lee Pacesetter 3-Die Set

£39.99

Full length sizing die.
Easy adjust dead length bullet seating die.
Factory crimp die, universal shell holder, powder dipper and instructions/load data.

Set includes a full length sizing die, easy adjust dead length bullet seating die, factory crimp die, universal shell holder, powder dipper and instructions/load data.

Lee

Lee Universal Shell Holder

£4.99

Works with all presses
Crafted from the finest steel

Crafted from the finest steel for a guaranteed secure fit. You can rely on these holders to work for you load after load. Essential!
Universal shellholder works with virtually any single stage press. Will not work with Lee Auto Prime.

See Sizing Guide Tab for full calibre chart.

There was a problem
Your input contains more than the maximum of 50000 characters in a single cell.

MTM

MTM 20 Round Slip Top Box

£3.99

Fits comfortably in a shirt or jacket pocket.
Ammo is protected from moisture and dust.
Each round is held quietly and securely in individual cavities.

MTM 20 Round Slip Top Box

This box is ideal for the hunter because it fits comfortably in a shirt or jacket pocket. Ammo is protected from moisture and dust. Each round is held quietly and securely in individual cavities.
Sizes:

# Medium Rifle - For calibers .22-.250 through 7.62x39
# Large Rifle - For calibers .270 Win. through 7mm Weatherby Mag
Color: Smoke.

MTM Case Gard Sizes

W-9 Round

Size

Common Calibers

Medium

.204 Ruger, .223 Rem,

Large

.243 Win, .25-06 Rem, .270 Win,

.30-06 Spr., .308 Win, 6.5x55 Swe

20 Round Slip and Flip Top

Size	Common Calibers
Small	.204 Ruger, .223 Rem,
Medium	.243 Win,
Large	.25-06 Rem, .270 Win, .30-06 Spr., .308 Win, 6.5x55 Swe

50 Round

Size	Common Calibers
Small	.204 Ruger, .223 Rem,
Medium	.243 Win, 308 Win
Large	.25-06 Rem, .270 Win, .30-06 Spr., 6.5x55 Swe

For complete sizing information for all calibres, please use the MTM page here.

Lee

Lee Auto Prime Tool NEW Model

£26.49

For large or small primers
Works with every brand of primer
A BushWear favourite

The Lee Auto Prime XR Hand Priming Tool is the updated version of a time tested classic. The XR has been designed to work with every brand of primer and features the patent pending "elevator pin" which safely separates a single primer from the tray reducing the likelihood of tray detonation. The XR uses the same body and shellholders as the original but the rest of the components have been improved or replaced. Some of the upgrades include an unbreakable comfort curve lever and large square trays that accept all brands of primer boxes with slide on covers for large or small primers.

Technical Information
Special Notes: This tool requires the use of Lee Auto Prime Shellholders (sold separately). It will not work with standard shellholders.
Material on the collar of tool must be removed to prime Winchester Short Magnum brass and Winchester Super Shot Magnum brass (#5 shellholder).

Frankford

Frankford Frankford Arsenal Rotary Tumbler Lite 230V Uk Spec

£193.99

Smaller, more compact design that holds up to 300 cases of .223 brass
Easy ON/OFF function
Works great with stainless steel pins
Easy twist cap with clear window to view tumbling and leak-proof cap design
3.3L capacity

Smaller, more compact design that holds up to 300 cases of .223 brass
Easy ON/OFF function
Works great with stainless steel pins
Easy twist cap with clear window to view tumbling and leak-proof cap design
3.3L capacity

Frankford Frankford Arsenal Rotary Tumbler Lite 230V Uk Spec

MTM

MTM P-100-44 Flip-Top Ammo Box 100 Round 41 44 45 by MTM

£5.99

Easy to grip
Scuff resistant
Mechanical hinge
Stackable
Snap-Lok latch

The Case-Gard P-100s are the perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and mechanical hinge are guaranteed for 25 years. Load label included.

MTM P-100-44 Flip-Top Ammo Box 100 Round 41 44 45 by MTM

Lee

Lee Primer Pocket Cleaner Combo

£2.49

Double Ended Design
Clean large and Small Primers
Does not work on 204 Ruger or 50 BMG Brass

Lee Primer Pocket Cleaners double ended design cleans both large and small primer pockets so that primers can be fully seated for better accuracy and safety. This item will not work on the 204 Ruger or 50 BMG brass. This item will not work on the 204 Ruger or 50 BMG brass.

Lyman

Lyman Turbo Case Cleaning Corn Cob Media 4.5lb

£22.99

Specially treated corncob media and works in all Turbo Tumbling systems.
Cases are clean, polished and ready for reloading.
Giant-size, easy-pour containers eliminate media mess.

TurboÂ® Case Cleaning Media is specially treated corncob media and works in all Turbo Tumbling systems. A few hours in a Lyman Turbo Tumbler and cases are clean, polished and ready for reloading. Giant-size, easy-pour containers eliminate media mess. Sizes: 4.5 lb. Easy Pour container.

Lyman Turbo Case Cleaning Corn Cob Media 4.5lb

Hornady

Hornady .243 58Gr VMax Bullet Heads (100pk)

£30.00

Sectional Density: 0.140
Ballistic Coefficient: 0.250

Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and helps to stabilize the bullet in flight. It also acts as a wedge, initiating bullet expansion. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles.

Hornady .243 58Gr VMax Bullet Heads (100pk)

RCBS

RCBS Powr Bullet Puller II

£39.99

Easy way to fix mistakes.
An improved 3-jaw chuck firmly grips the case rim.
Guaranteed for life.

The easy way to fix mistakes! An improved 3-jaw chuck firmly grips the case rim; just rap it on a solid surface like a hammer. Guaranteed for life.

Frankford

Frankford Frankford Arsenal Quick-N-EZ Impact Bullet Puller

£25.99

Impact style bullet puller
3 different sized collets included allows you to pull bullets from almost any caliber from .22 Hornet to 45-70, rimmed or rimless

The Frankford Arsenal Quick-N-EZ Impact Bullet Puller is perfect for when you need to pull some bullets. This impact-style tool method makes pulling bullets easy. Just one stern whack and the bullet is separated from the brass. It is as easy as that. Three different collets are included allowing you to pull bullets from just about every caliber from 22 Hornet to 45-70, whether rimmed or rimless.

Impact style bullet puller
3 different sized collets included allows you to pull bullets from almost any caliber from .22 Hornet to 45-70, rimmed or rimless

Frankford Frankford Arsenal Quick-N-EZ Impact Bullet Puller

Lee

Lee Ultimate Die Set

£79.99

Full length-resizing die.
Collet Neck sizing die.
Complete set, with shell holder, powder measure and Lee load data.

Full length-resizing die, perfect for reloading brass fired in other guns. A Collet Neck sizing die - used on your fire formed brass giving you best possible accuracy. No case lube required, cases last almost forever. Easy Adjust Dead Length Bullet seating die foolproofs the bullet seating adjustment. Factory Crimp die provides a secure crimp on bullets with or without crimp groove. Complete set, with shell holder, powder measure and Lee load data.