Estimated Days 6

• Standard thread sizes
• Solvent-proof coating
• Slotted grooves hold solvent for maximum cleaning
• Slotted grooves hold the patch securely on the jag
• Pointed tip for east patch penetration

Take a modern bore solvent and squirt it on a brass cleaning jag. The liquid will turn blue as it drips off the jag it is working so fast, it starts to dissolve your cleaning jag in front of your eyes! If you are following conventional wisdom clean until you get a clear patch you might be in for a long night. Tiptons Ultra Jag features a patent-pending technology that covers the surface of a traditional push-type jag with solvent-proof material, keeping aggressive modern bore solvents from creating false blue stains that normally indicate copper fouling. When you use Ultra Jags, you will get better, faster cleaning results because you will know you are getting blue stains from copper fouling and not from the surface of your jag.

• Standard thread sizes
• Solvent-proof coating
• Slotted grooves hold solvent for maximum cleaning
• Slotted grooves hold the patch securely on the jag
• Pointed tip for east patch penetration

• For use with the Lee Auto Prime
• Made from high quality steel

• Place them on almost any shooting surface
• Made of durable, water-resistant 600 Denier polyester
• Front shooting bag is industry's largest (approximately 8lbs)

Every hunter and shooter is looking for a versatile and steady shooting system that can be set up almost anywhere, and at any time. Whether you have minutes or seconds to set up for your next shot, the DeadShot Shooting Bags are the answer. These inexpensive and functional bags continue to set the industry standard for quality and functional shooting bags.

• Place them on almost any shooting surface
• Made of durable, water-resistant 600 Denier polyester
• Front shooting bag is industrys largest (approximately 8lbs)

• By far the most popular mid-layer Swanndri garment we have ever sold.
• Wind and water resistant.
• Half zip, pull over design, two chest pockets and a long tail cut.

• Full length sizing die.
• Easy adjust dead length bullet seating die.
• Factory crimp die, universal shell holder, powder dipper and instructions/load data.

• Developed for cleaning barrels in all calibres
• Quick and easy to use
• 90ml

• Everything you need to know about reloading in one manual
• Hardcover
• Covers 167 different cartridges

• 100% Waterproof
• 3 Layer Synthetic Fabric
• Attached Hood

• Holds cases in all RCBS.
• Can hold cases in other presses.
• Fits RCBS hand priming tool.

• 100% Cotton Flannel Patches
• Precisely cut to the correct size for use with Tipton Jags. 
• When used with slotted tip, choose the next size larger for optimum performance.
• 22-270 Cal size: 1.13" square

• 22-270 Cal size: 1.13" square
• 100% Cotton Flannel Patches
• Precisely cut to the correct size for use with Tipton Jags. 
• When used with slotted tip, choose the next size larger for optimum performance.

• T-Shirt with Shield
• OEKO-TEX Standard 100
• Weight 180 g/m²
• Wash separately with inside out.
• 60% Cotton, 40% Polyester Single Jersey

• Pack of 2
• Allows instant, accurate die changes
• Eliminates die adjustments

• Full length sizer die.
• Features expander - decapping unit.
• Also includes seater die with bullet seater plug.

• Leather reinforced palm
• Rib cuff
• Windproof
• Breathable
• High knitted cuffs

Hardwearing shooting glove with leather palms for grip and windproof, breathable WINDSTOPPER® fleece on the back. High knitted cuffs keep wrists warm when shooting.

• Leather reinforced palm
• Rib cuff

Main Fabric: 100% Polyester, Fleece, DWR
Technologies: GORE-TEX INFINIUM WINDSTOPPER 3-layer

• Action cleaning tool utilizes cylindrical swabs to clean and lubricate the locking lug recesses
• Chamber cleaning tool uses a mop to remove carbon and powder residue
• Includes both tools, a small and large rifle chamber mop, 10 swabs and nylon cleaning brush

These tools are made specifically for those hard to reach areas inside the receiver of your bolt action rifle.

• Action cleaning tool utilizes cylindrical swabs to clean and lubricate the locking lug recesses
• Chamber cleaning tool uses a mop to remove carbon and powder residue
• Includes both tools, a small and large rifle chamber mop, 10 swabs and nylon cleaning brush

• Includes a selection of the same high quality bits found in the Professional Gunsmithing Screwdriver Sets
• Includes standard Phillips, hex and torx bits
• 1-2" long 2 Phillips but which is ideal for recoil pad installation
• 1 hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments
• 1 magnetic handle is made of comfortable overmolded plastic

Less than half the size of comparable gunsmithing screwdriver sets, the Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. Its also the perfect size to include on your trips to the range and the field. Included with the standard, Phillips, hex, and torx bits, is a 2 long 2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4 square drive sockets and other attachments. The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise.

• Includes a selection of the same high quality bits found in the Professional Gunsmithing Screwdriver Sets
• Includes standard Phillips, hex and torx bits
• 1-2" long 2 Phillips but which is ideal for recoil pad installation
• 1 hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments
• 1 magnetic handle is made of comfortable overmolded plastic

Caldwell Deadshot Boxed Combo Filled

Every hunter and shooter is looking for a versatile and steady shooting system that can be set up almost anywhere, and at any time. Whether you have minutes or seconds to set up for your next shot, the DeadShot Shooting Bags are the answer. These inexpensive and functional bags continue to set the industry standard for quality and functional shooting bags.

• Place them on almost any shooting surface
• Made of durable, water-resistant 600 Denier polyester
• Quick connect feature makes bag transport easy
• Available in filled and unfilled

• Built in "exciters" for better tumbling action and faster case cleaning.
• Improved air flow.
• 1200 Classic runs smoother, quieter and better than ever before.

• 100% waterproof
• Side openings for access to the trousers under
• 100% polyester
• 2-way stretch fabric
• Versatile green

• Box of 100
• Cartridge: 0
• Bullet Diameter: 0.243
• Bullet Weight: 87
• Bullet Material: Copper

• By far the most popular mid-layer Swanndri garment we have ever sold.
• Wind and water resistant.
• Half zip, pull over design, two chest pockets and a long tail cut.

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

We believe that the Tipton Best Bore Brushes are the finest brushes ever offered. They meet or exceed military specifications and are designed to satisfy the shooter who wants the best tools to maintain his or her guns. The core is a single piece of brass wire that passes through the threaded brass coupler, guaranteeing that the core will never separate from the coupler in the barrel. Each brush contains the maximum number of bristles that can be inserted for the caliber. 20% more than standard brushes! Because of their density we recommend that Tipton Best Bore Brushes only be used with quality a one-piece rod and an appropriate bore guide.

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

• Smaller, more compact design that holds up to 300 cases of .223 brass
• Easy ON/OFF function
• Works great with stainless steel pins
• Easy twist cap with clear window to view tumbling and leak-proof cap design
• 3.3L capacity

• Smaller, more compact design that holds up to 300 cases of .223 brass
• Easy ON/OFF function
• Works great with stainless steel pins
• Easy twist cap with clear window to view tumbling and leak-proof cap design
• 3.3L capacity

• Caliber: 30 Caliber
• Weight: 175 Grain
• Diameter (inches): .308
• Bullet Type: Hollow Point Boat Tail
• Quantity: 100/Box

• Caliber: 30 Caliber
• Weight: 175 Grain
• Diameter (inches): .308
• Bullet Type: Hollow Point Boat Tail
• Quantity: 100/Box

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

We believe that the Tipton Best Bore Brushes are the finest brushes ever offered. They meet or exceed military specifications and are designed to satisfy the shooter who wants the best tools to maintain his or her guns. The core is a single piece of brass wire that passes through the threaded brass coupler, guaranteeing that the core will never separate from the coupler in the barrel. Each brush contains the maximum number of bristles that can be inserted for the caliber. 20% more than standard brushes! Because of their density we recommend that Tipton Best Bore Brushes only be used with quality a one-piece rod and an appropriate bore guide.

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

• 1/2 zip center front
• Flatlock stitching
• 4 way stretch fabrication
• Next-to-skin comfort
• Elasticated waist
• 200 GSM in weight

• 1/2 zip center front
• Flatlock stitching
• 4 way stretch fabrication
• Next-to-skin comfort
• Elasticated waist
• 200 GSM in weight

• By far the most popular mid-layer Swanndri garment we have ever sold.
• Wind and water resistant.
• Half zip, pull over design, two chest pockets and a long tail cut.

• 100% New Zealand Wool - 345gsm, 29-30 micron
• 100% Brushed cotton lining
• Heavy duty YKK front zip opening with internal zip guard that extends to the hood for total neck warmth
• Concealed metal zip pockets at hip and left chest
• Contoured hood with stretch cord toggle adjuster
• Back pleats for extra room to move
• Button opening cuff
• Tailored two piece sleeve

• 100% New Zealand Wool - 345gsm, 29-30 micron
• 100% Brushed cotton lining
• Heavy duty YKK front zip opening with internal zip guard that extends to the hood for total neck warmth
• Concealed metal zip pockets at hip and left chest
• Contoured hood with stretch cord toggle adjuster
• Back pleats for extra room to move
• Button opening cuff
• Tailored two piece sleeve

• Standard thread sizes
• Solvent-proof coating
• Slotted grooves hold solvent for maximum cleaning
• Slotted grooves hold the patch securely on the jag
• Pointed tip for east patch penetration

Take a modern bore solvent and squirt it on a brass cleaning jag. The liquid will turn blue as it drips off the jag it is working so fast, it starts to dissolve your cleaning jag in front of your eyes! If you are following conventional wisdom clean until you get a clear patch you might be in for a long night. Tiptons Ultra Jag features a patent-pending technology that covers the surface of a traditional push-type jag with solvent-proof material, keeping aggressive modern bore solvents from creating false blue stains that normally indicate copper fouling. When you use Ultra Jags, you will get better, faster cleaning results because you will know you are getting blue stains from copper fouling and not from the surface of your jag.

• Standard thread sizes
• Solvent-proof coating
• Slotted grooves hold solvent for maximum cleaning
• Slotted grooves hold the patch securely on the jag
• Pointed tip for east patch penetration

• No sticky
• Non allergenic
• Thin with water

Lee purchased the finest automotive deep draw lubricant and had it custom packaged exclusively. Lee lube is pleasant to handle and you can thin it with water. Non-sticky, nonallergenic. Very little is needed; it goes a long way. Eliminates stuck and dented cases and makes sizing less work. 

• High Quality Raw Materials
• Tested to 30% Overpressure
• Undergone Factory Annealing
• Brass May Be Discoloured Until Case Is Cleaned
• Not Loaded Ammunition

Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua's exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. 

New, unprimed brass should always be resized before loading. This brass has undergone factory annealing which extends brass life, as a result of the annealing process the neck portion of the brass may be discolored until the case is cleaned. This is not loaded ammunition.