Estimated Days 6

• Hood with drawstring
• Adjustable cuff with strap and velcro
• Ventilation at back with mesh inside
• Big inside pocket with zipper

• Hood with drawstring
• Two front pockets with snap buttons
• Adjustable waist at back part with drawstring
• Adjustable bottom with drawstring
• Adjustable cuff with strap and velcro
• Ventilation at back with mesh inside
• Big inside pocket with zipper

• Nylon bore brush
• Calibre specific
• Provides efficient and thorough cleaning

Tipton Nylon Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

Frankford Arsenal Quick-N-EZ Standard Media Separator

Sits conveniently on top of most 3 1/2 or 5 gallon buckets. Side walls are 4 3/4" in height, giving it the capacity to hold a tumbler full of brass and media. Perforated bottom lets the media fall through, leaving clean brass behind.

• Scent control finish
• Anti slip grip in palm

• Scent control finish
• Anti slip grip in palm

• Absorbs moisture form the air
• Easily recharged in the oven
• 40 gram can is ideal for small handgun vaults

Lockdown Silica absorbs moisture from the air inside a vault or storage area preventing condensation, mildew and rust from damaging valuable firearms. Crystals change color once fully saturated and can be easily recharged in the oven.

• Absorbs moisture form the air
• Easily recharged in the oven
• 40 gram can is ideal for small handgun vaults

6.5mm (.264) 143gr ELD-X (100pk) Bullet Heads

Outshell Comp 100% Leather
• 4cm Wide
• Metal Buckle

Outshell Comp 100% Leather
• 4cm Wide
• Metal Buckle

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16-27.

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

• 100% Cotton
• ultra-absorbent
• carry solvents, lubes and preservatives
• for applying large quantities of modern copper solvents

• Nylon bore brush
• Calibre specific
• Provides efficient and thorough cleaning

Tipton Nylon Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

• Mechanical plastic hinge for great strength
• Can place a 1" x 2 5/8" printer I.D. label on the lid
• Easily stackable
• True mechanical hinge allows the ammo to open flat and resists breaking in colder weather

• Mechanical plastic hinge for great strength
• Can place a 1" x 2 5/8" printer I.D. label on the lid
• Easily stackable
• True mechanical hinge allows the ammo to open flat and resists breaking in colder weather

• Wide and stable footprint dispersed over 8.5lb rest, 13" diameter base
• Steel ram provides smooth and quick elevation adjustments
• Use the 3 leveling feet to level your rest on most any surface
• Fore-end cradle is designed to accept all Caldwell Deluxe Universal Front Rest Bags
• The Rock helps eliminate the human factor in shooting and will help you shooting tighter groups.

The best way to determine the accuracy of your rifle and ammunition is to shoot them from a solid bench, with a quality shooting rest. With precise repeatability of shots as your goal. The Rock Deluxe Front Rest is the right tool for the job. The Rock helps eliminate the human factor in shooting and will help you shooting tighter groups.

• Wide and stable footprint dispersed over 8.5lb rest, 13" diameter base
• Steel ram provides smooth and quick elevation adjustments
• Use the 3 leveling feet to level your rest on most any surface
• Fore-end cradle is designed to accept all Caldwell Deluxe Universal Front Rest Bags

• Fully collapsible and weighs less than 25lbs for easy transportation and storage
• All-weather tabletop and seat can support up to 250lbs of weight
• Swiveling seat allows for both right and left handed shooters and accommodates any Caldwell shooting rests
• Table is 23" W x 34" L with a leg height of 32" and a seat height of 17"

Wish you could conveniently bring your own shooting table to the range? Now you can with the Caldwell Stable Table Lite. This shooting table is lightweight and durable, making it the perfect solution to overcrowded or rundown ranges. Setup and adjustments are fast and simple with a rotating seat and table depth adjustment to ensure maximum shooting comfort. No matter if its raining, snowing, the shooter is right handed or left handed, this table is ready for all situations with its ambidextrous seat pivots and all-weather tabletop and seat.

• Fully collapsible and weighs less than 25lbs for easy transportation and storage
• All-weather tabletop and seat can support up to 250lbs of weight
• Swiveling seat allows for both right and left handed shooters and accommodates any Caldwell shooting rests
• Table is 23" W x 34" L with a leg height of 32" and a seat height of 17"
• Super stable for long range shooting with best in class stability and portability

• 20 NRR, Dual microphones
• Adjustable volume control
• Amplify sounds below 85 decibels, above 85 decibels, the microphones instantly shut off to protect the shooters hearing
• Audio input jack
• True stereo amplification delivers maximum volume and clarity

The Low-Profile E-Max hearing protection combines great circuitry with a low profile earcup thats ideal for shotgun shooters and action shooters. The two microphones in the E-Max amplify sounds below 85 decibels, which amplifies normal communication, range commands, and environmental sounds. Above 85 decibels, the microphones shut off for a split second to protect the shooters hearing. Two microphones one in each cup give the user true stereo sound and allow the user to identify the directional source of a sound. Includes an integrated audio input jack allowing music to be played. Runs on 2 AAA batteries (not included). 23NRR

• 20 NRR, Dual microphones
• Adjustable volume control
• Amplify sounds below 85 decibels, above 85 decibels, the microphones instantly shut off to protect the shooters hearing
• Audio input jack
• True stereo amplification delivers maximum volume and clarity

• Patented USR shooting yoke
• 360 degree pan
• High-density foam grips
• Twist-style leg locks
• Lightweight aluminum legs - 20" - 40" height adjustment

The Twistlock Series from BOG is developed for obsessed hunters everywhere that demand steady sitting or kneeling shooting support in a highly portable platform. Ideal for Ambush situations, these pods are lightweight, durable and most importantly, rock solid. The twist-style leg locks allow for quick deployment, while the patented USR shooting yoke provides 360 degrees of shooting comfort.

• Patented USR shooting yoke
• 360 degree pan
• High-density foam grips
• Twist-style leg locks
• Lightweight aluminum legs - 20" - 40" height adjustment

• Elastic at waist
• Adjustable leg bottom with snap button

• Elastic at waist
• Adjustable leg bottom with snap button

• Packs into it's own pocket
• Waterproof
• Breathable
• Can be hung on a belt
• Quick to unpack

• By far the most popular mid-layer Swanndri garment we have ever sold.
• Wind and water resistant.
• Half zip, pull over design, two chest pockets and a long tail cut.

• 100% wool, 345gsm outer
• 2 layer technical lining 5k/8k
• Windproof
• Anorak style jacket with an adjustable 3 piece hood
• YKK half zip
• Zip chest pocket
• Two zip hand pockets
• Side zips at hem for easy entry
• Brand patch
• Button cuffs

• 100% wool, 345gsm outer
• 2 layer technical lining 5k/8k
• Windproof
• Anorak style jacket with an adjustable 3 piece hood
• YKK half zip
• Zip chest pocket
• Two zip hand pockets
• Side zips at hem for easy entry
• Brand patch
• Button cuffs

• 70% Shetland style wool (30.5 microns)
• 30% Nylon Blend with Hydrotex Lining
• Double layer knit construction
• Tough nylon-rich outer layer with soft wool inner layer
• Uncompromising strength and durability
• Ribbed & Elasticated cuff and waistband
• Fleece lined zip collar
• 100% windproof Hydrotex lining

• 70% Shetland style wool (30.5 microns)
• 30% Nylon Blend with Hydrotex Lining
• Double layer knit construction
• Tough nylon-rich outer layer with soft wool inner layer
• Uncompromising strength and durability
• Ribbed & Elasticated cuff and waistband
• Fleece lined zip collar
• 100% windproof Hydrotex lining

• 100% cotton
• Ultra absorbent
• Hold and carry solvents, lubes and preservatives into your bore and chamber

• Pointed end used to remove burrs.
• Features a bevel inside the case.
• Fit the open end over the case mouth to remove exterior burrs.

• Box of 100
• Cartridge: 0
• Bullet Diameter: 0.308
• Bullet Weight: 165
• Bullet Material: Copper

• 100pk
• Unmatched worldwide
• Not recomended for hunting

• Caliber: 30
• Bullet Diameter: .308"
• Bullet Weight: 150 Grains
• Bullet Style: Spitzer Boat Tail

• Caliber: 30
• Bullet Diameter: .308"
• Bullet Weight: 150 Grains
• Bullet Style: Spitzer Boat Tail

• Sectional Density: 0.226
• Ballistics Coefficient: 0.380

• Diameter: 0.308 Inches
• Quantity: 100 Bullet
• Grain Weight: 150 Grains
• Bullet Style: Spitzer Boat Tail
• Lead Free: No
• Ballistic Coefficient: 0.38
• Cannelure: No
• Bullet Coating: Non-Coated
• Bullet Caliber: 30 Caliber
• Sectional Density: 0.226

• 100% cotton, 200gsm
• Yarn dyed check
• Large chest pockets
• Half button placket
• Button cuff
• Relaxed fit

• 100% cotton, 200gsm
• Yarn dyed check
• Large chest pockets
• Half button placket
• Button cuff
• Relaxed fit

• Compressed felt pellets .17-.50 cal
• Pellets are tough and durable for superior cleaning and are easier to use than patches
• Each pack includes 1 caliber-correct nickel plated jag
• Available in a multi-caliber pistol kit with assorted pellets and jags
• Provides more consistent fit in lands and grooves of rifling for superior cleaning

• Compressed felt pellets .17-.50 cal
• Pellets are tough and durable for superior cleaning and are easier to use than patches
• Each pack includes 1 caliber-correct nickel plated jag
• Available in a multi-caliber pistol kit with assorted pellets and jags
• Provides more consistent fit in lands and grooves of rifling for superior cleaning

• Only scale that can never get out of adjustment.
• Beam is made from a very tough phenolic.
• Can't be bent.

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

• The most versatile shooting bag on the market making these great for PRS Matches, sighting in or hunting
• Durable construction for long service life
• Plastic pellet filling is non-absorbent and enhances stability while shooting
• Unique shape allows for multiple rest options
• Three-bag lineup: Large front shooting/barricade bag, rear bag and prop bag

• The most versatile shooting bag on the market making these great for PRS Matches, sighting in or hunting
• Durable construction for long service life
• Plastic pellet filling is non-absorbent and enhances stability while shooting
• Unique shape allows for multiple rest options
• Three-bag lineup: Large front shooting/barricade bag, rear bag and prop bag