Tipton

• Tipton Cleaning Pellet Jag .270/7mm Cal

Tipton Cleaning Pellet Jag .270/7mm Cal

• 100% cotton
• Ultra absorbent
• Hold and carry solvents, lubes and preservatives into your bore and chamber

• 100% cotton
• Ultra absorbent
• Hold and carry solvents, lubes and preservatives into your bore and chamber

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16-27.

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

• Compressed felt pellets .17-.50 cal
• Pellets are tough and durable for superior cleaning and are easier to use than patches
• Each pack includes 1 caliber-correct nickel plated jag
• Available in a multi-caliber pistol kit with assorted pellets and jags
• Provides more consistent fit in lands and grooves of rifling for superior cleaning

• Compressed felt pellets .17-.50 cal
• Pellets are tough and durable for superior cleaning and are easier to use than patches
• Each pack includes 1 caliber-correct nickel plated jag
• Available in a multi-caliber pistol kit with assorted pellets and jags
• Provides more consistent fit in lands and grooves of rifling for superior cleaning

• Durable cotton swab construction with 7.5" flexible bamboo handle
• Disposable
• Fits lands and grooves better than a patch for maximum cleaning
• No mess cleaning
• Fast and easy to use

• Durable cotton swab construction with 7.5" flexible bamboo handle
• Disposable
• Fits lands and grooves better than a patch for maximum cleaning
• No mess cleaning
• Fast and easy to use

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16-27.

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if theyre used carelessly though they wont pick up potentially damaging small abrasive particles. Coated rods get part of the job done they keep the stainless steel shaft from damaging your barrels rifling, but the coating will pick up small abrasive particles, which means youre effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber cant scratch your bore like stainless steel, and they wont embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods deluxe because they feature an ergonomically designed handle that spins on two sets of ball bearings the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The shank-through construction also allows the user to apply reasonable hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16-27.

• Hang hole for easy storage. Also allows for reasonable hammer blows to clear a stubborn patch
• Two sets of high quality bearings that will not bind under pressure and allows the shaft to follow the rifling
• Comfortable ergonomic shape. Handle remains fixed in your hand while the shaft rotates on the bearings to follow rifling
• Shank-through construction for working tight light patches
• Carbon fiber shaft will not embed particles that could damage your rifle bore

• Standard thread sizes
• Solvent-proof coating
• Slotted grooves hold solvent for maximum cleaning
• Slotted grooves hold the patch securely on the jag
• Pointed tip for east patch penetration

Take a modern bore solvent and squirt it on a brass cleaning jag. The liquid will turn blue as it drips off the jag it is working so fast, it starts to dissolve your cleaning jag in front of your eyes! If you are following conventional wisdom clean until you get a clear patch you might be in for a long night. Tiptons Ultra Jag features a patent-pending technology that covers the surface of a traditional push-type jag with solvent-proof material, keeping aggressive modern bore solvents from creating false blue stains that normally indicate copper fouling. When you use Ultra Jags, you will get better, faster cleaning results because you will know you are getting blue stains from copper fouling and not from the surface of your jag.

• Standard thread sizes
• Solvent-proof coating
• Slotted grooves hold solvent for maximum cleaning
• Slotted grooves hold the patch securely on the jag
• Pointed tip for east patch penetration

• Four caliber range specific rifle/pistol tips
• Solid brass is softer than barrel steel so there is no worry of damaging your bore, plus they will last much longer than the typical synthetic plastic tips
• Rifle/Pistol Tips are threaded 8-33
• Shotgun tip is threaded 5/16"-28
• 5 piece set includes: 22 - 29 cal, 30 - 35 cal, 35 - 44 cal and 45 cal

• Four caliber range specific rifle/pistol tips
• Solid brass is softer than barrel steel so there is no worry of damaging your bore, plus they will last much longer than the typical synthetic plastic tips
• Rifle/Pistol Tips are threaded 8-33
• Shotgun tip is threaded 5/16"-28
• 5 piece set includes: 22 - 29 cal, 30 - 35 cal, 35 - 44 cal and 45 cal

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Caliber specific individual Solid Brass Cleaning Jags
• Designed to provide a tight fit between the patch and the bore
• Pointed tip keeps the patch centered
• Jags have 8-32 threads
• .17 and .20 Cal Jags have 5-40 thread

• Allows you to release the tension on the hammer springs when storing your guns
• 5 pack

It is generally accepted that one should not drop the firing pin on an empty chamber, which is the primary reason to have Snap Caps for your favorite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs, when storing your guns, Snap Caps are ideal.

• Allows you to release the tension on the hammer springs when storing your guns

• Fits .223 Remington

Tipton's .223 Remington Snap Caps have a variety of uses around the bench. One shouldn't drop the firing pin on an empty chamber - which is the primary reason to have Snap Caps for your favorite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs, when storing your guns, Tipton's Snap Caps are ideal. Whatever your needs, Tipton's Snap Caps are handy and inexpensive. This package contains two .223 Remington snap caps.

• Used for checking or adjusting the trigger pull.
• Useful for releasing the tension on hammer springs.

It is generally accepted that once should not drop the firing pin on an empty chamber, which is the primary reason to have Snap Caps for your favorite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs, when storing your guns, Snap Caps are ideal. 

• Allows you to release the tension on the hammer springs when storing your guns
• 6 pack

It is generally accepted that one should not drop the firing pin on an empty chamber, which is the primary reason to have Snap Caps for your favorite guns. You should always use Snap Caps when checking or adjusting the trigger pull. If you prefer to release the tension on the hammer springs, when storing your guns, Snap Caps are ideal.

• Allows you to release the tension on the hammer springs when storing your guns

• Wire handled swabs
• Perfect for application of lubes and preservatives
• 4" long
• 50 Pack
• Dozens of uses

Wire-handled swabs are perfect for applications of lubes and preservatives. They also work well with solvents to scrub out recesses in receivers, bolt bodies and other hard-to-reach areas. Dozens of uses. 4" long.

• Nylon bore brush
• Calibre specific
• Provides efficient and thorough cleaning

Tipton Nylon Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

• Bronze bore brush
• Calibre specific
• Provides efficient and thorough cleaning

Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

• Bronze bore brush
• Calibre specific
• Provides efficient and thorough cleaning

Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

• Tipton Bronze Bore Brushes for firearm maintenance. 
• Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

• 35-50 Cal size: 2.25" square
• 20 Gauge size: 2.25" square
• 100% Cotton Flannel Patches, precisely cut to the correct size for use with Tipton Jags. 
• When used with slotted tip, choose the next size larger for optimum performance.

• 35-50 Cal size: 2.25" square
• 20 Gauge size: 2.25" square
• 100% Cotton Flannel Patches, precisely cut to the correct size for use with Tipton Jags. When used with slotted tip, choose the next size larger for optimum performance.

• All plastic
• Disposable
• Pack of 12
• 6"

All-plastic, disposable eye droppers are just the ticket for measuring and transferring liquid products. Great for cold bluing solutions, cutting oils, solvents, preservatives, etc. These 6" Pipettes are perfect for any job at hand. Put the product just where you want it with these Pipettes.

• 10, 12, 16 Ga size: 3" square
• 100% Cotton Flannel Patches, precisely cut to the correct size for use with Tipton Jags. 
• When used with slotted tip, choose the next size larger for optimum performance.

• 10, 12, 16 Ga size: 3" square
• 100% Cotton Flannel Patches, precisely cut to the correct size for use with Tipton Jags. When used with slotted tip, choose the next size larger for optimum performance.

• Magazine Take Down Tool easily removes bottom plate from magazine
• Works on all single and double stack magazines including AR mags, 1911 mags and most double stack pistol mags
• Solvent resistant nylon bristles

The Tipton Magazine Cleaning Brush easily cleans single or double stack magazines including AR mags, 1911 mags and most double stack pistol magazines. The brush features solvent resistant nylon bristles.

• Magazine Take Down Tool easily removes bottom plate from magazine
• Works on all single and double stack magazines including AR mags, 1911 mags and most double stack pistol mags
• Solvent resistant nylon bristles

• Padded neoprene construction protects firearm finishes
• Excess oils and solvents are absorbed into the mat, keeping the surface clean and dry
• Rolls easily to fit into a range bag
• Hand washable

The perfect material to lay on your workbench while cleaning or disassembling firearms. Padded neoprene construction protects firearm finishes while helping keep track of small parts. Excess oils and solvents are absorbed into the mat, keeping the surface clean and dry. The Tipton Maintenance Mat rolls easily to fit your range box. Hand washable.

• Padded neoprene construction protects firearm finishes
• Excess oils and solvents are absorbed into the mat, keeping the surface clean and dry
• Rolls easily to fit into a range bag
• Hand washable

• Bronze bore brush
• Calibre specific
• Provides efficient and thorough cleaning

Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

Tipton Handgun Bronze Bore Brush .22 Cal 3pk

Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

• All components are non-marring, made from high-quality bronze
• 20% more bristles than standard brushes
• Wire-through coupler for maximum strength

• Mag well arm is removable for clamping in a bench vise when additional rigidity is required
• Solvent-resistant polymer provides durability and is non-marring to surfaces
• Built-in barrel bushing wrench
• Insert, push, rotate, extract. It is that easy.
• Center section rotates 180 Degrees making in infinitely adjustable

The Tipton 1911 Mag Well Vise Block is quite possibly the handiest tool a 1911 owner could ask for. Designed for use with the Tipton Best Gun Vise, this center support slides into the magazine well and provides a steady base for cleaning or light gunsmithing on your 1911. Users without a Best Gun Vise can mount the Mag Well Vise Block directly to their bench top with the included fasteners. Loaded with handy features, this tool is a must have for anyone with a 1911.

• Mag well arm is removable for clamping in a bench vise when additional rigidity is required
• Solvent-resistant polymer provides durability and is non-marring to surfaces
• Built-in barrel bushing wrench
• Insert, push, rotate, extract. It is that easy.
• Center section rotates 180 Degrees making in infinitely adjustable